Модуль керування сигналом Counter Drone UAV

Counter Drone UAV Signal Control Module

введення

1. The UAV signal control module is the counter-drone module.
2. Its primary function is to disrupt UAVs by emitting electromagnetic waves in specific frequency bands, interfering with their flight control and signal transmission systems.
3. To obtain the counter-effect of the drone and realize effective control of the “black flight” БПЛА, the drone can be forced to land or drive away quickly.

Особливість

1. GaN power amplifier chip with high-efficiency
2. Real-time control of the CAN/UART bus
3. Frequency band control of discontinuous frequency points
4. Mode of low-power standby
5. Protection against output open-circuit
6. Back-up power protection
7. Extra-wide operating voltage range
8. Temperature range of operation: -40°C до +65 °C
9. Design flexibility

специфікація

Робоча частота: 5720MHz～5850MHz（830MHz～940MHz,1550MHz～1620MHz,2400MHz～2500MHz）

Output power: 35dBm+2dB

Output power control: Output off, half power output, up to three adjustable

Output voltage standing wave ratio: ≤2,0

CAN bus function: Working frequency reading and setting Output power control; Module temperature reading; Output open circuit alarm; Threshold parameter setting of temperature and standing wave ratio Module standby control.

Signal sweep period: 30uS≤Period≤40uS

Rated voltage: DC+24V (DC+9V～DC+30V)

Rated current: ≤1.2A @ DC24V

Standby working current: ≤0.05A @ DC24V

Споживана потужність модуля: ≤25W

Rf: 50ох

розміри(Д*Ш*В): 84.5mm X 48mm X 18mm

вага: ≤150g

Structural material: Алюмінієвий сплав 6061

Surface treatment: Anodized natural color

Heat dissipation mode:Natural heat dissipation