150km 100Mpbs frequency hopping at 2bands UAV radio link high transmission rate and anti-interference

150km 100Mpbs frequency hopping at 2bands UAV radio link high transmission rate and anti-interference

導入

の 150km 100Mpbs frequency hopping at 2bands UAV radio link Device is a high-performance communication system designed for long-range video, data and telemetry transmission in demanding environments. Built on advanced OFDM technology, this drone radio link provides robust, 信頼性のある, and secure wireless connectivity for applications such as UAVs, 地上局, 無人システム, 公安, and industrial monitoring.

With a maximum air-to-ground transmission distance of up to 150 キロメートル, dual Ethernet ports, dual transparent serial ports, そして Sbus interface, this UAV radio link combines wideband performance with multiple service interfaces in a compact and lightweight form factor.

The device supports point-to-point, ポイントツーマルチポイント, リレー, and optional mesh networking modes, offering great flexibility for different deployment scenarios. By integrating carrier aggregation (CA) and MIMO technologies, this radio link delivers stable high-throughput links even in complex radio environments.

---

主な特長

• Bi-directional broadband OFDM link supporting video, data and telemetry data transmission.

• Supports FHSS, automatically frequency hopping.

• 最大 100 Mbps throughout on the same frequency band.

• The RF transmission’s maximum power is 10W*2, but alternative power outputs are available upon request.

• Multiple service interfaces:

  • デュアル RJ45 イーサネット ポート (transparent bridging)

  • Two transparent serial UARTs (configurable TTL/RS232)

  • One Sbus input/output interface

• Dual-antenna design (2T2R): SMA connectors with support for MIMO and carrier aggregation.

• アップリンクおよびダウンリンクのストリーム制御.

• Wide frequency range options:

  • 566–678 MHz

  • 1420–1530MHz

• Selectable channel bandwidths: 3, 5, 10, 20, または 40 MHz.

• Maximum air interface throughout: まで 100 Mbps.

• 移動速度: Supports no less than 240km/hour.

• 適応変調: QPSK, 16-QAM, 64-QAM, 自己適応.

• 柔軟なネットワーキング:

  • ポイントツーポイント

  • Point-Relay-Point

  • ポイントツーマルチポイント (star topology, まで 64 ノード)

  • Mesh networking (カスタマイズ可能な, まで 32 ノード)

• 高出力電力:

  • 2 × 10 W @ 1420–1530 MHz

  • 2 × 10 W @ 566–678 MHz

• Excellent receiver sensitivity: -102 dBm (1Mbps@20MHz).

• Advanced encryption support: AES-128, SNOW 3G, and ZUC algorithms.

• 2～10km (地面から地面まで), 20～150km (UAVから地上へ, optional range level)

• Configuration and monitoring via web-based UI or UART AT commands.

• 電源入力: 24-32V

• Optimized power consumption (1D4U):

  • Access node average < 1.86A @ 28Voltage

  • Center node average < 0.75A @ 28Voltage

• コンパクトなサイズ: 131 × 93.7 × 24.8 mm (コネクタを除く).

• 軽量設計: 277 グラム.

• Rugged Aluminum alloy housing.

---

技術仕様

Wireless Parameters

• テクノロジー: Orthogonal Frequency Division Multiplexing (OFDM)

• 周波数帯域:

  • 566–678 MHz

  • 1420–1530MHz

• Channel bandwidths: 3 / 5 / 10 / 20 / 40 MHz

• データレート: まで 100 Mbps (depending on channel bandwidth and modulation)

• Modulation schemes: QPSK / 16-QAM / 64-QAM (adaptive selection)

• 出力電力: 2 × 10 W per frequency band

• 受信感度: -102 dBm (1Mbps@ 20 MHz)

• Antenna ports: SMA female connectors (dual, main and auxiliary)

• MIMO/CA support: Yes

ネットワーキング

• Topologies supported:

  • ポイントツーポイント

  • Point-Relay-Point

  • Point-to-Multipoint star (まで 64 ノード)

  • Mesh networking (custom, まで 32 ノード)

• Default uplink/downlink allocation: 4:1 ratio (設定可能)

• Automatic frequency hopping within band

インターフェース

• イーサネット:

  • 2 × GH1.25-4P with locking connector

  • Transparent transmission (bridge mode, identical IP address for both ports).This design allows users to connect multiple IP-based systems conveniently without additional network configuration.

  • ビデオ送信
    IP cameras can be connected directly to the radio link device via the Ethernet port for real-time video transmission.
    For cameras with HDMI, SDI, AHD, or AV outputs, video encoding should be handled using an H.265/H.264 video encoders before connecting to the Ethernet port of the radio link device.

  • Video Receiving End
    Except connect to a computer or NVR, an H.265/H.264 video decoder devices can be connected to the Ethernet port of the radio link system to achieve real-time HD video monitoring and playback.

• UART1:

  • GH1.25-3P locking connector

  • デフォルト: TTL 3.3 V (オプションのRS232)

  • Default baud rate: 115200 bps (configurable via web UI). オプション 1200, 2400, 4800, 9600, 19200, 28800, 38400, 57600, 76800, 100000, 115200, 230400, 460800, 921600, 1152000, 2304000, 3750000, 4000000 bps.

  • UART1 has the highest priority in transmission, 確保する 超低遅延, making it suitable for telemetry, flight control, and other time-critical data applications.

  • Configurable for UART-to-UART or UART-to-Ethernet transmission

• UART2:

  • GH1.25-3P locking connector

  • デフォルト: TTL 3.3 V (オプションのRS232)

  • Default baud rate: 115200 bps (設定可能). オプション 1200, 2400, 4800, 9600, 19200, 28800, 38400, 57600, 76800, 100000, 115200, 230400, 460800, 921600, 1152000, 2304000, 3750000, 4000000 bps.

  • Configurable for UART-to-UART or UART-to-Ethernet transmission

  • Working Modes:

    • • Data Transmission Mode (デフォルト): Enabling flexible integration with various control systems or telemetry devices.

      • Control UART Mode

• Sbus interface:

  • GH1.25-3P locking connector

  • Supports Sbus-in and Sbus-out

  • Configurable via web UI

• 電源入力:

  • XT30PW-Mコネクタ

  • 入力電圧: 24–32 Voltage DC

• ANT input:

  • ANT1: TX/RX antenna port,SMAメス.

  • ANT2: TX/RX antenna port,SMAメス.

LED Indicators

• 電源LED (赤): Constant ON when device is powered.

• ノードLED (青):

  • Constant ON: center node

  • Flashing: アクセスノード

• リンクLED (multi-color):

  • オフ: no wireless connection

  • 赤: link established, weak signal

  • オレンジ: link established, medium signal

  • 緑: link established, strong signal

機械式 & 環境

• Dimensions: 131 × 93.7 × 24.8 mm (コネクタを除く)

• Weight: 277 グラム (2x10W model); Another waterproof marine 2×10 watt casing weighs 4468 グラム.

• 動作電圧: 24–32 V DC

• 消費電力:

  • アクセスノード: < 52 W平均

  • Center node: < 21 W平均

---

Applications

UAV & Drone Communications

This 150km 100Mpbs frequency hopping at 2bands UAV radio link device is an ideal solution for UAV platforms requiring real-time, long-range broadband links for HD video, テレメトリー, and command control. With its dual Ethernet ports, the device can seamlessly connect to IP cameras or onboard video encoders such as the H.265/H.264 system.

公安 & 緊急時の対応

In mission-critical environments such as firefighting, 災害救援, または警察の作戦, this drone radio link provides reliable video surveillance and data connectivity between ground teams and command centers.

軍隊 & Tactical Use

For reconnaissance missions, 移動ユニット, and battlefield networks, this long-range radio link supports secure, encrypted bi-directional communication with robust anti-jamming capability. Mesh networking allows self-healing connections if one node is compromised.

産業監視

This 150km 100Mbps long-range video transceiver can be deployed in oilfields, mining sites, or large-scale infrastructure projects for real-time video inspection and data collection across vast distances.

交通機関 & 海事

With its long-range capability and strong penetration in non-line-of-sight conditions, this 150km 100Mbps long-range video transceiver can be applied to ship-to-shore communications, 国境警備, or railway monitoring systems.

---

導入シナリオ

Point-to-Point Wireless Link

This UAV radio link can establish a dedicated long-range bi-directional connection between two endpoints. This mode is suitable for UAV-to-ground station links or remote surveillance camera backhaul.

Point-to-Multipoint Star Network

このモードでは, a central node communicates with up to 64 アクセスノード. Each access node communicates with the central node, but not directly with each other. This topology is efficient for surveillance systems or sensor networks where multiple field units report back to a central hub.

Relay Mode

This radio link can be configured as a relay node, extending communication range by forwarding signals between two remote endpoints.

メッシュネットワーキング (Custom Option)

For complex environments requiring redundancy and resilience, this radio link supports a custom mesh mode with up to 32 ノード. In this self-healing topology, if one node goes offline, the remaining nodes automatically reconfigure to maintain network connectivity.

---

Integration with Video Systems

The 150km 100Mpbs frequency hopping at 2bands UAV radio link device is compatible with a wide range of IP-based video systems. For applications requiring HDMI, SDI, の, or AHD video inputs, it is recommended to pair this radio link with the our H.265/H.264 video encoder system. The encoder can connect directly to the 4-pin Ethernet port, enabling efficient wireless transmission of high-definition video streams.

By adjusting video encoder bitrates, users can optimize transmission range. Lowering the video bitrate reduces channel occupancy, allowing this drone radio link to achieve longer transmission distances under the same conditions.

---

安全 & 暗号化

This radio link incorporates multiple encryption standards to ensure secure communication:

• AES-128: Widely adopted symmetric encryption algorithm offering strong security with low computational overhead.

• SNOW 3G: A stream cipher used in mobile communication networks.

• ZUC: A cipher algorithm developed for 3GPP LTE networks, ensuring compatibility with global standards.

These encryption methods guarantee confidentiality, 誠実さ, and protection against interception, making this Unmanned aerial vehicle systems radio link suitable for sensitive applications.

---

利点

• Ultra-long range: まで 150 km 見通し.

• High throughput: supports bandwidths up to 40 MHz with speeds up to 100 Mbps.

• 柔軟なネットワーキング: from simple point-to-point to complex mesh topologies.

• Compact and lightweight: のみ 277 g, ideal for UAV payload integration.

• 低遅延: prioritized serial port transmission for real-time control signals.

• Robust security: multiple encryption algorithms.

• スケーラビリティ: supports large-scale deployments with up to 64 ノード.

よくある質問 (FAQ)

Q1: What is the maximum transmission range of the UAV radio link?
A1: Under optimal line-of-sight conditions, this model can achieve an air-to-ground distance of up to 150 km.

第2四半期: Can I use this model for UAV video transmission?
A2: Yes. The model is designed for UAV applications and supports direct integration with IP cameras or video encoders such as the our H.265/H.264 encoder system.

Q3: Does it support simultaneous video and data transmission?
A3: 絶対に. With dual Ethernet ports and dual serial ports, the long-range High throughput allows concurrent transmission of video, テレメトリー, および制御信号.

Q4: What is the typical latency of the device?
A4: Latency depends on the interface and configuration. UART1 is prioritized and provides the lowest latency, suitable for control signals. Video transmission latency will depend on the encoder used.

Q5: How secure is the UAV wireless link?
A5: The UAV wireless link supports AES-128, SNOW 3G, and ZUC encryption algorithms, ensuring secure communication for both civilian and tactical applications.

Q6: Can the device work in non-line-of-sight environments?
A6: Yes. Operating in sub-GHz frequency bands (566–678 MHz), the long-range drone transmitter and receiver has strong penetration capability, making it effective in environments with trees, 建物, or terrain obstacles.

Q7: How many nodes can be supported in a star topology?
A7: It can support up to 64 ノード in a point-to-multipoint star configuration.

Q8: Is mesh networking available?
A8: Yes, mesh networking is available as a custom option, までサポート 32 nodes with automatic reconfiguration if a node fails.

Q9: 必要な電源は何ですか?
A9: The device operates with a DC input of 28–30 V. Power is provided via the XT30PW-M connector.

Q10: Can I configure the device through software?
A10: Yes. it provides a web-based UI for configuration, 監視, and status checking of wireless links.

---

結論

の 150km 100Mpbs frequency hopping at 2bands UAV radio link Device 多用途です, high-performance solution for long-range wireless communication. Its combination of wideband throughput, robust OFDM-based link stability, flexible networking modes, and strong encryption make it suitable for UAVs, 戦術作戦, 公安, and industrial monitoring.

コンパクト, 軽量, and engineered for reliability, it provides the critical connectivity needed for modern unmanned systems and beyond.

---

オプションの構成

• Frequency band selection: 566–678 MHz or 1420–1530 MHz.

• UART interface level: デフォルト 3.3 VTTL, オプションのRS232.

• Mesh networking: available as a custom option for specialized projects.

• Video system integration: optional an encoder/decoder for HDMI/SDI/AV/AHD video sources.

Configuration Options for High Throughput and Dual-Band Hopping

The device is equipped with dual internal power amplifiers and dual-antenna transmission capability, which provides flexibility in how the system is configured for different operational requirements. Depending on whether the priority is maximum throughput or enhanced frequency diversity, the device can be configured in different ways.

1. Configuration for Maximum Throughput (100 Mbps Mode)
To achieve the maximum air interface rate of 100 Mbps, both internal power amplifier modules must be configured to operate in the same frequency band. The transceiver supports two selectable bands: 566–678 MHz and 1420–1530MHz. When both amplifiers are locked to the same band, the system operates in a dual-chain mode, effectively combining the capacity of both RF paths. Each individual RF chain is capable of a peak throughput of approximately 50 Mbps. By running both in parallel on the same frequency band, the system aggregates the capacity to deliver up to 100 Mbps total throughput. This configuration is recommended when applications require the highest possible data rate, such as streaming multiple HD video channels or transmitting high-bandwidth sensor payloads from UAV platforms.

2. Configuration for Dual-Band Frequency Hopping
あるいは, it can be configured for dual-band frequency hopping operation, which enhances anti-jamming capability and spectrum agility. In this configuration, one internal power amplifier is preset to operate in the 566–678 MHz band, while the other is preset for the 1420–1530 MHz band. When the device is placed in dual-band frequency hopping mode, the working frequency dynamically alternates between these two bands. This allows the communication link to adapt to interference, 環境条件, or regulatory requirements, ensuring reliable connectivity even in contested spectrum environments.

まとめ

• 100 Mbps Mode: Both amplifiers on the same band (566–678 MHz または 1420–1530MHz), 有効にする 50 + 50 Mbps aggregated throughput.

• Dual-Band Hopping Mode: One amplifier set to 566–678 MHz, the other to 1420–1530 MHz, enabling frequency agility but limiting maximum throughput to 50 Mbps per active chain.

This flexible configuration ensures that users can adapt the 150km 100Mpbs frequency hopping at 2bands UAV radio link Device to mission requirements, whether prioritizing maximum bandwidth または enhanced resilience in complex radio environments.