5km 1080p50 ワイヤレスビデオ伝送ソリューション: 主な考慮事項

long range 5km 1080p50 Wireless Video Transmission Solution Guide

A recent inquiry from an AV integrator highlighted a common question:

Can we transmit 1080p50 HDMI or SDI video over 5 km without pairing?

こんにちは. Our company is searching for extra long range HDMI (またはSDI) video transition systems that DO NOT require Pairing. We would like to know if IVcan has any solutions that allow 1080p50 video transmission for distances of, 少なくとも, 5キロ.

答えは: Yes — but only with the right setup and technology.

---

Why Standard Wireless HDMI Falls Short

Conventional wireless HDMI systems are typically limited to short-range applications (<100 メートル).

To achieve 5km 1080p50 wireless video transmission, the system must use:

• RF-based transmission instead of direct HDMI
• ビデオ圧縮 (〜400MHz)
• Robust modulation like COFDM

COFDM is a wireless transmission technology used for high-quality video and data over long distances. Here’s an easy way to understand it:

1. Multiple Frequencies: Instead of sending all the video data on a single frequency, COFDM splits it into many small “sub-channels” (周波数).
2. 干渉に対して堅牢: If one frequency encounters interference or obstacles, the other frequencies can still carry the data, so the video stays stable.
3. Ideal for Long Distances: COFDM handles reflections, 建物, and other obstacles better than traditional single-frequency wireless links.
4. アプリケーション: Broadcast TV, professional drone video, ライブイベントストリーミング, and any situation where you need reliable video transmission over several kilometers.

Analogy: Imagine sending a long message using many couriers along different roads. If one road is blocked, the message still reaches the destination via other roads — this is essentially how COFDM keeps video transmission stable.

---

When 5km Transmission is Feasible

For a reliable 5km 1080p50 wireless video transmission solution, the critical factor is:

✔ Line-of-Sight (THE)

• Clear LOS between transmitter and receiver
• Adequate antenna height (20–50 m+)
• Minimal obstruction in the Fresnel zone

⚠ Non-Line-of-Sight (NLOS)

• Signal attenuation rises sharply
• 5 km transmission becomes unreliable
• Performance highly dependent on environment

---

Video Quality vs Link Stability

One key decision for 5km 1080p50 wireless video transmission solutions is how to handle weak signals:

Option A: Maintain Quality

• Keep full 1080p50 resolution
• Weak signals may cause freezes or drops

Option B: Prioritize Stability

• Adaptive bitrate reduces video quality
• Ensures continuous transmission even under poor conditions

COFDM システム allow flexible configuration to balance these modes.

---

Consider Latency

Latency also impacts performance:

• Low latency → less error correction → lower robustness
• High robustness → more buffering → higher latency

Applications dictate the choice:

• Live production → ultra-low latency
• Surveillance or long-term links → stable connection preferred

---

典型的なアプリケーション

A 5km 1080p50 wireless video transmission solution is ideal for:

• UAV/drone video downlink
• Event broadcasting
• Point-to-point building connections
• セキュリティと監視
• Temporary outdoor installations

---

結論

A successful 5km 1080p50 wireless video transmission solution depends on:

• Clear LOS
• Proper antenna setup
• ビットレート & video quality strategy
• Latency requirements

With COFDM technology, professional-grade wireless HDMI/SDI transmission over 5 km is achievable.

---

Ready to Deploy Your Solution?

If you need guidance on a 5km 1080p50 wireless video transmission solution, contact us with your project details. We can design the optimal COFDM-based setup for your application.

Broadcast-Grade vs. Security-Grade Wireless Video Transmission

When talking about professional wireless video transmission, there are generally two main categories: 放送グレード そして セキュリティグレード. Although both transmit video wirelessly, their design priorities and performance characteristics are different.

---

1️⃣ Broadcast-Grade Wireless Video Transmission

目的: Used for live TV production, スポーツイベント, コンサート, and professional film/video production.

主な機能:

• 高いビデオ品質: Supports 1080p50, 4K, and low-latency HD video with minimal compression.
• 超低遅延: Often <100ミズ, so video is in sync with live events.
• Robust RF Modulation: Uses COFDM or other advanced modulation to maintain signal over long distances (several km) 挑戦的な環境でも.
• LOS Preferred: Typically requires line-of-sight (THE) for maximum stability.
• 高い信頼性: Designed to avoid signal dropouts or frame loss at all costs, even if the system temporarily interrupts during very weak signals.

Analogy: Like a live TV broadcast truck — the goal is crystal-clear, uninterrupted video for millions of viewers.

---

2️⃣ Security-Grade (監視) ワイヤレスビデオ伝送

目的: Used for CCTV, drones for security monitoring, traffic cameras, and long-term surveillance systems.

主な機能:

• Continuous Transmission Priority: Stability over quality. The system will lower video resolution or increase compression to maintain the link.
• Higher Tolerance for Latency: Real-time latency is less critical (often 0.5–2 seconds acceptable).
• NLOS Capabilities: Some systems can operate in non-line-of-sight (NLOS) conditions using repeaters, wall penetration, or lower frequencies.
• Lower Bandwidth Requirement: Often optimized for long-term streaming, not broadcast-quality HD.

Analogy: Like a security camera network — the goal is to always have a live feed, even if the image is slightly blurry or compressed.

---

3️⃣ Key Difference Summary

特徴	Broadcast-Grade	Security-Grade
ビデオ品質	Ultra-high (1080P50 / 4K)	中くらい (圧縮された)
潜在	非常に低い (<100ミズ)	Medium–high (0.5–2s acceptable)
Transmission Priority	Quality first, may drop if weak	Link stability first, allows compression
LOS/NLOS Requirement	LOS strongly preferred	Can tolerate NLOS
Typical Use Case	Live TV, スポーツ, コンサート	CCTV, ドローン, 交通監視

---

要するに:

• Broadcast-grade = crystal-clear, 低遅延, professional video for live events.
• Security-grade = reliable, continuous video feed for monitoring, sacrificing some quality if needed.