Disclaimer
- Please read the user’s manual carefully before use. Be sure to pay attention to the warnings and understand all points completely.
- Please strictly abide by the local radio frequency management regulations.
- Please follow the installation steps in the manual to use this product. Our company and agent will not take legal responsibility for the damage of equipment or personnel caused by the installation and modification of users.
- This copyright of this manual belongs to Great Mainlink Tech Co., LTD. No one may make copies without written consent.
Attenzione
Attention to installation
1. Before power on, make sure the antenna connection is reliably . Altrimenti, it will cause damage to the device.
2. Make sure that the voltage is within the range of use.
3. Please pay attention to the EMC of all the electronic equipments on your drone.
4. It is recommended that the antenna should be installed downward and keep the antenna away from the metal on the drone.
5. Make sure to use the matching antenna.
Before use
1. Make sure that all cables are connected correctly and firmly.
2. No foreign objects (es. liquids, sand, eccetera.) can be entered inside the device.
3. It takes 15 seconds for the device to start. Video and data cannot be transferred until the device has finished booting.
4. Please ensure that the environment in which the equipment is used is free of other electromagnetic interference.
5. When the signal weakens, you can improve the effect by changing the heading direction of the antenna.
Lista imballaggio
Device X 2
Panoramica
Industry drone market is developing very fast in recent years. The fight time and distance of drones are getting longer and longer. MK22/MK55, a long-range wireless transmission system, is designed for VTOL fixed wing and other long-range drones. The system can transmit video, fight control data, dati di controllo del gimbal, and RC data simultaneously. With the advantage of high level intergration and powerful function, MK22/MK55 is a typical good product to meet long-range transmission requirements.
There are two frequency bands——800MHz、1.4GHz and 2.4GHz. Users can choose according to their needs. Please choose the suitable frequency band according to local regulations.
MK22 can transmit data and video to 22km, MK55 can transmit data and video to 55km, making it very suitable for long range drone.
If you use our recommend ground station, you only need one cable with connector to connect the device and your ground station.
*1Test under LOS and no interference conditions。
Caratteristiche
Long distance Modulation
-MK22 Up to 22km @ LOS– OFDM
-MK55 Up to 55km @ LOS
Video interface Data interface
– Ethernet *1 – UART(TTL/RS232)/SBUS,
Hopping/Fixed Frequency Banda di frequenza
-Fisso: user defined – 800MHz/1.4GHz/2.4GHz
-Hopping: automatico Modalità di lavoro
BW – Air unit can be :Point to point mode
-5/10/20 MHz Repeater mode
Temperatura di lavoro Power range
– 40℃ ~ + 70 ℃ – DC 9~28V Battery 3S~6S
M52 Interface Description
Unità aerea
side view
Ethernet
Numero | Character | Descrizione | Input/Output |
1 | T+ | TX+ | il |
2 | T- | TX- | il |
3 | R+ | RX+ | io |
4 | R- | RX- | io |
2. UART1
Numero | Character | Descrizione | Input/Output |
1 | sol | GND | I / O |
2 | R | RS232 RX | io |
3 | T | RS232 TX | il |
3. UART2
Numero | Character | Descrizione | Input/Output |
1 | sol | GND | il |
2 | R | TTL RX | io |
3 | T | TTL TX | il |
4. Energia
Numero | Character | Descrizione | Input/Output |
1 | sol | GND | I / O |
2 | V | +Vcc(9v~28v) | io |
5. SBUS1
Numero | Character | Descrizione | Input/Output |
1 | S | SBUS OUT | il |
2 | V | +5v(I max 1A) | il |
3 | sol | GND | I / O |
6. SBUS2
Numero | Character | Descrizione | Input/Output |
1 | S | SBUS OUT | il |
2 | V | +5v(I max 1A) | il |
3 | sol | GND | I / O |
7. Indicatore di energia
This indicator is solid green when air unit is booting.
8. indicatore di collegamento
LED Pattern Description |
solid green Wireless link is established |
light off Wireless link is lost |
9. Status Indicator
LED Pattern(Blink only in booting) Description |
Blink 2 times Initialization OK, Frequency is 1.4GBlink 1 time Initialization OK, Frequency is 800M |
Blink 3 times Switch mode (Swith from air to ground, vice verse) |
Blink slow all the time Enter configuration mode |
Blink fast all the time Device abnormal |
10. SMA antenna connector.
- Fiber glass antenna.
- OLED display.
- Batteria
- Connettore.
Numero | Descrizione | Input/Output |
1 | Rx+ | io |
2 | Rx- | io |
3 | Tx+ | il |
4 | Tx- | il |
5 | UART1 TX (RS232) | il |
6 | UART1 RX (RS232) | io |
7 | UART2 TX (RS232) | il |
8 | UART2 RX (RS232) | io |
9 | NC | |
10 | RC1_IN | io |
11 | RC2_IN | io |
12 | +5v | il |
13 | GND | I / O |
14 | GND | I / O |
15 | GND | I / O |
16 | GND | I / O |
17 | GND | I / O |
18 | GND | I / O |
19 | Vcc (9v~28v) | io |
20 | Vcc (9v~28v) | io |
specificazione
Categoria | Articolo | Dettaglio |
senza filiPrestazione | Banda di frequenza | 800MHz/1.4GHz |
Intervallo di frequenze | 800MHz:806MHz~825MHz1.4GHz:1427MHz~1447MHz2.4GHz: 2400~2480MHz | |
Band width | 5MHz/10MHz/20MHz | |
Modulazione | OFDM | |
km-trasmettitore-video-wireless-ricevitore-trasmissione hdmi | MK22: 30dBm±1dBMK55: 33dBm ± 1dB | |
sensibilità | -95dBm | |
Gamma | MK22: 22kmMK55:55km*1 | |
Velocità in bit | 30Mbps @ 20MHz | |
km-trasmettitore-video-wireless-ricevitore-trasmissione hdmi | DC 9 ~ 28V | |
Consumo di energia | ≤8.5W | |
Interfaccia | Antenna | liceo *2 |
Energia | XT30 | |
UART | TTL 3.3V,1 bit di start, 8 bit di dati, 1 bit di stop, km-trasmettitore-video-wireless-ricevitore-trasmissione hdmi, Baud rate 115200 (predefinito),57600, 38400, 19200, 9600 | |
UART1 e UART2 | ||
SBUS | SBUS_IN | |
SBUS_OUT | ||
Ethernet | 4 perno | |
Pulsante | 1 | |
km-trasmettitore-video-wireless-ricevitore-trasmissione hdmi | Per interruttore aria e terra | |
Antenna | Interfaccia | liceo |
Tipo | Aria:Glue stick antenna 20cmGround:Fiber glass antenna, penal antenna | |
tipo di polarizzazione | Verticale | |
Guadagno | Aria:2.5dBiGround:12dBi | |
SWR | ≤2.0 | |
Ambiente | Temperatura di lavoro | -40℃ ~ + 70 ℃ |
Temperatura di conservazione | -40℃ ~ + 85 ℃ | |
Umidità | 5~ 95%,senza condensa | |
Aspetto esteriore | Dimensione | 112 X 63.5 X 19 mm |
peso | 143g |