Module de flux vidéo analogique CVBS AHD TVI vers réseau vidéo

Applications

Suitable for CVBS/AHD/TVI analog video to network video stream, analog video to wired network, Wi-Fi network (facultatif), 4G network(facultatif), remote video transmission and control.

Default Setting

rsp://192.168.1.188:554/0

rsp://192.168.1.188:554/1

ID de l'utilisateur: administrateur

Mot de passe: administrateur

Caractéristiques

1. Prise en charge H.265, Encodage H.264, débit binaire ultra faible, high-definition quality.
2. Soutien 1920×1080@30/25 images, 1280*720@30/25 images, Entrée vidéo analogique PAL/NTSC.
3. Prise en charge de l'identification et de la commutation automatiques des sources vidéo AHD/TVI/CVBS.
4. Prise en charge de l'interphone vocal bidirectionnel.
5. Support RTSP, ONVIF, GB28181, MQTT, Protocoles WebRtc.
6. Prise en charge de la surveillance à distance sur les téléphones mobiles et les PC, open secondary development SDK.
7. Support DC6~12V/POE power supply.
8. Prise en charge du réseau filaire, Wi-Fi extensible, 4G network.
9. Support TF card recording up to 256G

spécification

 

Main control	SSC335
Image conversion chip	PR2000K AHD video capture chip
Traitement vidéo	Supports H.264/H.265 encoding, code rate 0.1M~8Mpbs adjustable, 1~30 images/seconde réglable
Sortie d'image	Grand public:1920×1080@30,1280*720@30,720*576@25 Sous-flux:D1, VGA, 640×360
Audio processing	G.711/ACC encoding, supports two-way voice intercom
Capture d'images	Supports continuous, timed and triggered capture
Fonctions commerciales	Prise en charge de la superposition OSD, détection de mouvement, humanoid detection, alarme sonore
Reset key interface	Prise en charge 1 interface de réinitialisation matérielle
Interface USB	1X USB interface, supports Wi-Fi/4G expansion, fonction UVC personnalisable
Protocole réseau	Supports TCP/IP, IPv4, RTSP, HTTP, DHCP, NTP, RTMP, MQTT, WebRtc
Surveillance à distance	Supports mobile phone and PC remote monitoring, prend en charge l'accueil du SDK P2P/WebRtc multiplateforme ouvert
Interface réseau	1X RJ45 network interface, 10/100M adaptatif, protection contre la foudre et conception antistatique
Interface audio	Supports 1X MIC input, 1x LINE_OUT
Port série	1 Port série TTL, supports data transparent transmission and IoT device docking
Interface de carte TF	1X TF card interface, prise en charge maximale 256G
Température de travail	-20~70°C
Tension de fonctionnement	DC5.5V-12V, Alimentation POE
Size	Single board 38*38mm (not including lens), special-shaped structure can be customized

 

Dimension

FAQ

Q1: Does the video encoding board of this CVBS video to network port support two CVBS inputs and two ethernet video streams?

A1: This model does not support two CVBS video inputs and convert to two network video streams at the same time.
Please contact us and I will tell you another model that can support two video streams.

T2: What is the latency of this video encoder converter board for CVBS video input and IP network stream output?

A2: Please check the test pictures. The delay of this model is not very stable, it will increase the latency with the longer working time.

CVBS camera and monitor displaying needs 93ms.

T3: Is it possible to add PTZ or serial port data to the video stream? Is it possible to add a logo to the video?

UN: Is WiFi capability required? Need P2P remote access?

We can customize and develop all the functions you mentioned. If your order quantity is more than 500 unités, we can do it for free. If it is less than this quantity, we need to charge additional regular development fees.