— HD-Video-COFDM-Sendemodul mit SDI/AHD-Eingangsschnittstelle
— H.265/H.264-Video-Encoder-Modulator

COFDM Transmitter modulator Module SUE5SA&RCB features SDI/AHD(AV compatible) inputs with COFDM modulation technology and H.265/H.264 encoding that complete video audio transmission in high-speed motion and NLOS (none line of sight) conditions with low latency. SUE5SA&RCB module consists of two boards(video codec board and COFDM modulation board) with flat cable connection. The module also provides one transparent transmission uart(one way).
COFDM Transmitter modulator Module SUE5SA&RCB can work in different features mode with different firmware which should be specified before it is shipped. The default normal features of the SUE5SA&RCB-Modul:
- H.265 video compression and COFDM modulation
- Video input via SDI or AHD interface
- Full-HD-Auflösung, maximum 1080p/i @60fps
- Einstellbare Arbeitsfrequenz, Bandbreite, bitstream rates, HF-Leistung, etc.
The default normal features of the COFDM Transmitter modulator Module will be paired with the SHD5&DR2C receiver module. The HD video latency from its inputting of the transmitter to the HDMI screen displaying of the receiver is about 200ms to 250ms.
Specified features implemented with different firmware:
- Normal H.264 video compression;
Paired with SHD4&DR2C receiver module. - Proprietary H.264 video compression only used p-frames for the lowest latency;
Paired with SHD4&DR2C receiver module with specified firmware. Die Videolatenz von der Eingabe des Senders bis zur HDMI-Bildschirmanzeige des Empfängers beträgt etwa 50 ms bis 130 ms. - Video input via SDI + AHD interface, two channels video compression, and transmitted
Paired with SHD5&DR2C receiver module with specified firmware.
Spezifikation:
IO
| HD Video input | SDI, MMCX Connector |
| AHD Video input | 6PIN-PH1,25-mm-Anschluss, AV compatible |
| Daten uart | 3PIN-PH1,25-mm-Anschluss, TTL |
| Control uart | 4PIN-PH1,25-mm-Anschluss, TTL |
| Power in | 2PIN-PH2,0-mm-Stecker |
| RF output | Schule |
Modulation
| Modulation Formats | COFDM(DVB-T) |
| Träger | 2K |
| Bandbreite | Konfigurierbar von 1 MHz bis 8 MHz, step by 1KHz |
| FEC | 1/2, 2/3, 3/4, 5/6, 7/8 |
| Schutzintervall | 1/32, 1/16, 1/8, 1/4 |
| Konstellation | QPSK, 16QAM, 64QAM |
| Bitraten | 0.5Mbit/s bis 31,67 Mbit/s |
RF
| Frequenzbänder | 200MHz~2300MHz(other bands can be supported with special manufacturing) |
| Tuning Step size | 1KHz |
| Power out | Configurable, maximal -5dBm(subject to frequency) |
Video und Audio
| Video-Eingang | SDI or AHD, auto-detected after system start-up |
| Videoformate | 1080@60P, 1080@50P, 1080@30P, 1080@25P, 1080@24P, 1080@60I, 1080@ 50I, 1080@30I, 720@60P, 720@50P, 720@30P, …… 720*480 60ich(NTSC), 720*576 50ich(KUMPEL) AHD 720P@25P/30P, AHD 1080P@25P/30P |
| Videokodierung | H.265 |
| Audioeingang | Embedded SDI or analog audio |
| Audiokodierung | AAC, 16Bit, stereo, 32Kbit/s |
| Verschlüsselung | AES256 |
Überwachung und Kontrolle
Comprehensive transmitter setup with Config Panel or Windows PC via control uart.
Temperaturbereich
Vollständige Spezifikation: 0° bis +70°C Umgebung
Lager: –40° bis +80°C
Leistungsbedarf
Eingabebereich: 7~24VDC
Stromverbrauch: <350mA@12V
Physikalische Eigenschaften
Maße: 70x45x13mm (not including connectors out of the board)
COFDM Transmitter modulator Module from China is recommended as high quality and software is defined.

Stelle eine Frage
Vielen Dank für deine Antwort. ✨