COFDM Transmitter modulator Module SUE5SA RCB

— HD video COFDM transmitter module with SDI/AHD input interface
— H.265/H.264 video encoder modulator

COFDM Transmitter modulator Module
COFDM Transmitter modulator Module

COFDM Transmitter modulator Module SUE5SA&RCB features SDI/AHD(AV compatible) inputs with COFDM modulation technology and H.265/H.264 encoding that complete video audio transmission in high-speed motion and NLOS (none line of sight) conditions with low latency. SUE5SA&RCB module consists of two boards(video codec board and COFDM modulation board) with flat cable connection. The module also provides one transparent transmission uart(one way).

COFDM Transmitter modulator Module SUE5SA&RCB can work in different features mode with different firmware which should be specified before it is shipped. The default normal features of the SUE5SA&Modulo RCB:

  • H.265 video compression and COFDM modulation
  • Video input via SDI or AHD interface
  • Risoluzione FullHD, maximum 1080p/i @60fps
  • Frequenza di lavoro regolabile, larghezza di banda, bitstream rates, Potenza RF, eccetera.

The default normal features of the COFDM Transmitter modulator Module will be paired with the SHD5&DR2C receiver module. La latenza del video HD dall'ingresso del trasmettitore alla visualizzazione sullo schermo HDMI del ricevitore è compresa tra circa 200 ms e 250 ms.

Specified features implemented with different firmware:

  • Normal H.264 video compression;
    Paired with  SHD4&DR2C receiver module.
  • Proprietary H.264 video compression only used p-frames for the lowest latency;
    Paired with SHD4&DR2C receiver module with specified firmware. La latenza video dall'ingresso del trasmettitore alla visualizzazione sullo schermo HDMI del ricevitore è compresa tra circa 50 ms e 130 ms.
  • Video input via SDI + AHD interface, two channels video compression, and transmitted
    Paired with SHD5&DR2C receiver module with specified firmware.

Specifica:

IO

HD Video inputSDI, MMCX Connector
AHD Video input6Connettore PIN PH1,25 mm, AV compatible
Dati uart3Connettore PIN PH1,25 mm, TTL
Controllo uart4Connettore PIN PH1,25 mm, TTL
Accensione2Connettore PIN PH2.0mm
Uscita RFSMA

Modulazione

Modulation FormatsCOFDM(DVB-T)
Portatori2K
Larghezza di bandaConfigurabile da 1 MHz a 8 MHz, passo di 1KHz
FEC1/2, 2/3, 3/4, 5/6, 7/8
Intervallo di guardia1/32, 1/16, 1/8, 1/4
CostellazioneQPSK, 16QAM, 64QAM
Bitrate0.5Mbps a 31,67 Mbps

RF

Bande di frequenza200MHz~2300MHz(other bands can be supported with special manufacturing)
Ottimizzazione della dimensione del passo1KHz
Power outConfigurabile, maximum -5dBm(subject to frequency)

Video e audio

Ingresso videoSDI or AHD, auto-detected after system start-up
Formati video1080@60P, 1080@50P, 1080@30P, 1080@25P, 1080@24P, 1080@60I, 1080@50I, 1080@30I, 720@60P, 720@50P, 720@30P, ……
720*480 60IO(NTSC), 720*576 50IO(PAL)
AHD 720P@25P/30P, AHD 1080P@25P/30P
Codifica videoH.265
Ingresso audioEmbedded SDI or analog audio
Codifica audioCAA, 16morso, stereo, 32Kbps
crittografiaAES256

Monitoraggio e controllo
Comprehensive transmitter setup with Config Panel or Windows PC via control uart.

Intervallo di temperatura
Specifica completa: 0° a +70°C ambiente
Magazzinaggio: da –40° a +80°C

Requisiti di alimentazione
Intervallo di ingresso: 7~24 VCC
Consumo energetico: <350mA@12V

Caratteristiche fisiche
Dimensioni: 70x45x13mm (esclusi i connettori fuori dalla scheda)

COFDM Transmitter modulator Module from China is recommended as high quality and software is defined.

Fai una domanda

← Precedente

Grazie per la risposta. ✨