5.8GHz 长距离无线数据链路模块 100Mbps MIMO | 以太网 UART SBUS | 5-15公里无人机遥测
目录
概述
该 5.8GHz Long-Range Wireless Transmission Link Module is a high-performance long-range wireless communication solution designed for professional UAV systems, 工业控制, 机器人技术, and telemetry applications. 经营于 5.8GHz frequency band, the module supports IEEE 802.11n compatibility and provides stable high-speed wireless data transmission using advanced dual-antenna MIMO technology.
With a maximum air data rate of 100 Mbps 和一个 transmission distance of up to 15 空对地场景中的公里, the module is ideal for applications requiring reliable long-distance communication with low latency and high bandwidth. The module also supports ground-to-ground communication distances ranging from 300 米到 1500 米, depending on environmental conditions.
The module integrates multiple communication interfaces, 包括:
-
Ethernet transparent transmission
-
UART serial communication
-
SBUS signal input and output
These interfaces allow seamless integration with flight controllers, autopilots, 电脑, 相机, 工业设备, 和其他嵌入式系统.
Designed with 尺寸紧凑 (42.5 × 30.5 毫米) and weighing only 8.9 G, the module is highly suitable for space-constrained platforms such as drones and portable devices. The module operates with a wide input voltage range of 7–30V and maintains power consumption below 5.5W during full data transmission, ensuring efficient performance.
Configuration and system management are easily handled through a Web UI interface, allowing users to configure parameters such as channel selection, 串口波特率, and network mode.
The module also supports flexible network topologies, 包括:
-
Point-to-Point communication
-
Point-to-Multipoint communication
-
Star network topology
With robust design, high transmission efficiency, and flexible connectivity, the wireless module provides a powerful wireless communication backbone for demanding professional applications.
特征
Long-Range Wireless Communication
The module provides long-distance wireless communication up to 15 空对地场景中的公里. This capability makes it suitable for UAV telemetry, 远程监控, and long-range control systems.
High Speed Data Transmission
与一个 maximum air data rate of 100 Mbps, the module supports high-bandwidth applications such as real-time video streaming, telemetry data transfer, and network communication.
Dual-Antenna MIMO Technology
内置的 多输入多输出 (多输入多输出) wireless architecture uses two antennas to improve signal reliability, increase throughput, and enhance resistance to interference.
Multiple Data Interfaces
The module integrates several communication interfaces:
-
Ethernet port for network data
-
UART serial port for device communication
-
SBUS input and output for RC systems
This multi-interface design makes the module adaptable for various systems and devices.
IEEE 802.11n Compatibility
该模块支持 IEEE 802.11n wireless standard, ensuring stable performance, wide compatibility, and efficient wireless communication.
Transparent Data Transmission
Both the Ethernet port and serial interface support transparent data transmission, allowing data to be transmitted without modification between devices.
灵活的组网方式
The module supports multiple network configurations:
-
点对点
-
点对多点
-
Star network topology
This flexibility enables deployment in complex communication networks.
宽电压输入
The power input supports 7V to 30V DC, allowing easy integration with UAV batteries, vehicle power systems, and industrial power supplies.
Web-Based Configuration Interface
The module includes a user-friendly Web UI for configuration and management. Users can easily adjust network parameters, transmission settings, and serial port configurations through a browser.
紧凑、轻便的设计
以其 small size and lightweight construction, the module is optimized for embedded applications such as drones, 机器人技术, and portable communication devices.
产品规格
Wireless Specifications
频带: 5.8 千兆赫
无线标准: IEEE 802.11n compatible
Wireless Bandwidth: 20 兆赫
Maximum Air Data Rate: 100 Mbps
Maximum Transmission Power: 29 分贝
天线配置: Dual antenna MIMO
传输距离:
空对地: 5 – 15 千米
地对地: 300 – 1500 米
Supported Network Topology:
- 点对点
- 点对多点
- 星网
Supported Channels and Center Frequencies:
| 渠道 | 中心频率 (兆赫) |
|---|---|
| 36 | 5180 |
| 40 | 5200 |
| 44 | 5220 |
| 48 | 5240 |
| 149 | 5745 |
| 153 | 5765 |
| 157 | 5785 |
| 161 | 5805 |
| 165 | 5825 |
Hardware Specifications
模块尺寸: 42.5 × 30.5 毫米
印刷电路板厚度: 1.6 毫米
重量: 8.9 G
Component Height:
Top side: < 4.5 毫米
Bottom side: < 2.5 毫米
Power Input Voltage: 7V – 30V DC
功耗:< 5.5W during full transmission
Interface Specifications
以太网端口
类型: 100 Mbps bidirectional wireless transparent Ethernet
连接器:4-别针 1.25 毫米锁定连接器
UART & SBUS Interface
类型: Bidirectional transparent UART + 系统总线
连接器: 5-别针 1.25 毫米锁定连接器
Default UART Level: TTL 3.3V
Optional UART Level: RS232 (customizable during production)
Supported Baud Rates: 1200 / 2400 / 4800 / 9600 / 38400 / 57600 / 115200 / 230400 / 460800 / 921600
Baud rate configuration is available through the Web UI.
天线接口
ANT1: IPEX antenna connector
ANT2: IPEX antenna connector
电源接口
连接器: 4-别针 1.25 毫米锁定连接器
Voltage Range: 7V – 30V
5输出电压
连接器: 2-别针 1.25 毫米锁定连接器
输出电压: 5V regulated output for cooling fan power supply.

LED指示灯
电源指示灯
颜色: 红色的
地位: Always on when power is supplied.
节点 LED
颜色: 蓝色的
AP Mode: Solid on
Station Mode: 闪烁
链接 LED
| LED Status | Meaning |
|---|---|
| 离开 | No wireless connection established |
| 红色的 | Wireless link connected, but signal very weak |
| 橙子 | Wireless link connected with moderate signal |
| 绿色的 | Wireless link connected with strong signal |

Applications
The wireless transmission module is suitable for a wide range of professional and industrial wireless communication scenarios.
无人机通信系统
The module is ideal for drone telemetry and control systems, enabling reliable long-distance communication between UAVs and ground control stations.
工业自动化
In industrial environments, the module can be used for wireless machine control, 远程监控, and equipment networking.
机器人技术
Robots requiring long-distance wireless communication can benefit from the module’s high-speed data transmission and stable connection.
Remote Monitoring Systems
The module enables wireless data transmission for sensors, 监控系统, and remote data acquisition.
Autonomous Vehicles
For autonomous vehicles and mobile robots, the module provides stable communication links for navigation data and system control.
Wireless Network Bridges
The Ethernet transparent transmission function allows the module to be used as a wireless Ethernet bridge for network extension.
RC Control Systems
The integrated SBUS接口 supports remote control applications and can connect directly to flight controllers and RC receivers.
定制选项
To meet the requirements of different applications, the module supports various customization options.
Serial Interface Customization
The default serial interface uses TTL 3.3V电平, but it can be customized to RS232电平 according to customer requirements.
固件定制
Custom firmware configurations can be developed to support specific communication protocols or specialized functions.
天线选项
Different antenna types can be selected depending on transmission distance and environmental conditions, 包括:
-
高增益定向天线
-
Omnidirectional antennas
-
Custom antenna cables
Connector Customization
Alternative connectors or cable assemblies can be customized for integration with specific devices.
OEM品牌
Manufacturers and distributors can request OEM贴牌, customized packaging, and branding for integration into their own products.
常见问题解答 (常问问题)
Q:What is the maximum communication distance of the module?
一个: 该模块支持 5–15 km air-to-ground communication 和 300–1500 meters ground-to-ground transmission, depending on antenna type, 环境, and installation conditions.
Q:Does the module support point-to-multipoint communication?
一个: 是. 该模块支持 点对点, 点对多点, and star network topologies, making it suitable for multi-device communication networks.
Q:How is the module configured?
一个: The module can be configured using a Web UI management interface. Users can access the configuration page through a browser to adjust parameters such as wireless channel, 网络模式, and serial port settings.
Q: What serial baud rates are supported?
一个: The module supports multiple baud rates, 包括:
1200, 2400, 4800, 9600, 38400, 57600, 115200, 230400, 460800, 和 921600.
Q: What type of antennas does the module use?
一个: The module uses IPEX antenna connectors for both ANT1 and ANT2 ports, allowing connection to external antennas.
Q: What power supply does the module require?
一个: The module supports a 7V to 30V DC input voltage, making it compatible with various power systems including drone batteries and industrial power supplies.
Q: Can the module output power for external devices?
一个:是. The module provides a 5V regulated output that can be used to power accessories such as cooling fans.
Q: What is the power consumption of the module?
一个: During full data transmission, the module consumes less than 5.5W, ensuring efficient operation even in battery-powered systems.




iVcan.com –
I’ve been using this 5.8GHz Long-Range Wireless Data Link Module in my UAV telemetry setup, and the performance has been excellent. The connection is very stable even at long distances, and the signal strength indicators make it easy to monitor the link quality. The dual-antenna MIMO design really improves reliability, especially in environments with interference. Setup through the Web UI was straightforward, and integrating the Ethernet and UART interfaces with my flight controller was simple. Overall, it’s a compact, lightweight module that delivers fast data transmission and dependable long-range communication.