显示所有 9 结果

变频上下转换器

What is RF Downconverters exactly?
RF downconverters are integrated assemblies that convert a high-frequency RF signal to a lower-frequency IF signal. In wireless video transmission transmitter and receiver systems, point-to-point radio communication, 和其他应用, RF downconverters are widely used. A frequency down converter receives an RF signal, which is then mixed with a LO (本地振荡器) signal to produce an output IF (Intermediate Frequency) 信号. 例如, 2.4G frequency input and conversion to 600Mhz, 1.3G-1.4G RF frequency input conversion to 300Mhz-400Mhz frequency, and lower 1000Mhz.
Frequency Down Converter, also named frequency mixer.
下变频器

BDC Block Down Converter

无线视频传输 RF 频率数字下变频器 COFDM 传输频率 2.4G 至 600Mhz 低 BDC

$199.00
3200-3800MHz 至 200-800MHz COFDM 下变频器 BDC - 射频移频器

BDC Block Down Converter

3200-3800MHz 至 200-800MHz COFDM 下变频器 BDC – 射频移频器

$495.00
COFDM双通道下变频器 - 射频移频器

BDC Block Down Converter

COFDM 双通道降频转换器 BDC FDC

$350.00
1600-2200 MHz 频率下变频至 200-800 MHz混频器

BDC Block Down Converter

1600-2200 MHz 频率下变频至 200-800 MHz混频器BDC

$450.00
3200-3800MHz 至 200-800MHz COFDM 下变频器 BDC - 射频移频器

BDC Block Down Converter

2.4 到 3-3.5 GHz RF 频率上下转换器

原价为：$1,500.00。当前价格为：$450.00。
COFDM RF 下变频器 BDC

BDC Block Down Converter

COFDM RF 下变频器 BDC FDC

原价为：$999.00。当前价格为：$790.00。
COFDM RF 下变频器 BDC

BDC Block Down Converter

频率 2100-2500Mhz 降至 350-750Mhz COFDM RF 下变频器 BDC

原价为：$999.00。当前价格为：$790.00。
200W Ku 频段上行转换器 BUC 1-2G 至 10.7-12.7GHz，用于卫星上行链路

变频上下转换器

200W Ku 频段上行转换器 BUC 1-2G 至 10.7-12.7GHz，用于卫星上行链路

COFDM上下变频器

BDC Block Down Converter

降频转换器 2.4G 至 250Mhz DVB-T COFDM 数字高清电视射频微波模块板

$690.00
An RF (射频) downconverter is a device or circuit used to convert a high-frequency RF signal to a lower intermediate frequency (如果) or baseband for easier processing. This is a critical component in many communication systems, 雷达, and signal processing applications.

Key Components of an RF Downconverter:

  1. RF Input Stage:
    • Receives the incoming high-frequency RF signal.
    • May include filters to select the desired frequency band and reject unwanted signals.
  2. 本地振荡器 (洛):
    • Generates a stable signal at a specific frequency to mix with the RF signal.
    • The LO frequency is chosen to produce the desired IF signal after mixing.
  3. 混合器:
    • Combines the RF signal with the LO signal.
    • Outputs two frequencies: the sum and difference of the RF and LO frequencies.
    • 通常, a filter selects the desired IF frequency (usually the difference frequency).
  4. IF Amplifier:
    • Amplifies the downconverted IF signal for further processing.
    • May also include additional filtering to improve signal quality.
  5. Output Filter:
    • Removes any unwanted harmonics or spurious signals from the mixer output.
    • Ensures a clean IF signal.

应用领域:

  • Communications: Used in receivers for mobile phones, satellite communication, and Wi-Fi systems to process signals for demodulation.
  • 雷达系统: Converts high-frequency radar echoes to lower frequencies for easier analysis.
  • 测试设备: Part of spectrum analyzers or oscilloscopes for RF signal measurement.
  • 广播: Used in TV and radio receivers for demodulating broadcast signals.

Types of RF Downconverters:

  1. Direct Downconversion:
    • Converts RF directly to baseband without an intermediate frequency.
    • Simpler architecture but may have issues like DC offset and IQ imbalance.
  2. Heterodyne Downconversion:
    • Uses one or more intermediate frequencies.
    • Provides better selectivity and image rejection but is more complex.
  3. Wideband Downconversion:
    • Supports a wide range of RF frequencies.
    • Often used in spectrum monitoring applications.

Design Considerations:

  • 频率范围: The operational RF and IF frequency ranges.
  • 噪声系数: Low noise is crucial for high sensitivity in receivers.
  • 线性度: Essential to minimize distortion and intermodulation products.
  • Image Rejection: Ensures that unwanted mirrored frequencies are suppressed.
  • 功耗: Important for battery-operated devices.
If you're looking to design or use an RF downconverter, details about the specific frequency range and application will help refine the choice of components and topology.