Question 1

1. Can you show me this two-way data video link module real product video?

Accepted Answer

Yes, please check the blow video link at the youtube.

Video at Youtube

Question 2

2. Does this model support IP mesh? Is your full duplex link module support for signal relay?

Accepted Answer

This model support customizing the IP mesh function. There are three versions: 3km, 10km, and 50km according to build different the power amplifier.

IP mesh wireless video data audio link module TDD transceiver wireless video transmitter

Normal default full duplex link module support relay, you should buy at least three or more units. One unit is the transmitter, one unit as the receiver, and the other unit can put the middle between the transmitter and receiver as the relay/repeater/extender.

Question 3

3. Can you tell me how to connect your two-way data video link to the RF power amplifier?

Accepted Answer

The maximum RF transmission power of this two-way data video link module is 25±2 dBm, We also provides power amplifier to increase the RF Power to 2W/5W/10W. Below diagram shows how to add power amplifier outside of two-way digital data video link module.

Where is the IIC_SCL pin on the module?

Ethernet Radio Transceiver module with power control for external PA

Question 4

4. Can you show me what complete products by this wireless video data link module?

Accepted Answer

Yes, Please check the below link product, which is used the wireless video data audio two-way link module to assemble, just plus the Power ampleifier and encloser and accessory.

TX900

15km 30km 80km 150km long-distance wireless video transmitter receiver transmission transceiver PA 2W 5W 10W

15-150km long-range wireless video transmitter and receiver for drone camera

Question 5

5. Can we monitor the module temperature By using web UI?

Accepted Answer

There was no function to query the temperature of the module.

Question 6

6. Can you sell the Morningcore module CX6600 to me? I want to assemble them by myself.

Accepted Answer

Sure. It is ok.
The Moningcore CX6600 (L1860C_P2P) is only an electronics module, you need to develop a peripheral circuit to support it, like power and ethernet and data Input Outport. And you also need to hire a software engineer to develop the firmware and UI for you.
As a trial sample, it is better that you can buy our complete products to test. After you test and use them, the quality is satisfied, then try to buy the module or parts to develop it by yourself. You can copy our design and improve it to be an excellent product.
After all, this is a radio transmission product, and any improper operation may interfere with the signal, resulting in shorter transmission distances.

Question 7

7. Regarding frequency- for testing, we will use 2.4 GHz. However, can we switch frequency bands to 1.4G or 800Mhz later if we change antennas to the right ones? As far as I understand this unit does not have PA.

Accepted Answer

Sure. support.
There is no optional frequency band of 2.4G modification on the web page, you need to send AT commands to modify or enter the Morningcore web page to modify.

Question 8

8. Do you have the exact dimension size? Special the fixing hole size by screw.

Accepted Answer

Question: Any recommendations on the PA + link module enclosure? Need an RF cavity filter? minimal box with cooling for the RF transistor?

Answer: The PA enclosure is CNC according to your design and construction. We used the electronic cooling fan. The encloser is a special CNC produced according to the UAV video data link module + Power Amplifier + cooling fan.

Please check the below picture. Our completed product, TX900, has only a link module + Power Amplifier and cooling fan.

https://i0.wp.com/ivcan.com/wp-content/uploads/2019/09/TDD-Transceiver-Model-T30P-2-watts-PA-power-amplifier.webp

Question 9

9. If I buy just a trial sample without the PA board what range will I get and is it possible to add PA later?

Accepted Answer

What range of the trail sample do you need?
We can offer you a 1~150 km range of the link module. You can add the PA later if you want. Min 15km and max 150km module cost is different.
The module can transfer the signal over 150km with the 10-watt PA to increase the signal. Without the PA, the transmission range is almost 10~15km.
If you buy one 15km range module, even you plus the PA, the range is almost 15~17 km range. The signal strength and ability of the anti-interference will increase much.

Question 10

10. How much current(amps )does the module draw?

Accepted Answer

The Power consumption is about 4W.
Current equals power consumption divided by supply voltage
4 / 12=0.33A, if you’re on a 12-volt supply.

Question 11

11. I need the 150 km transmission range wireless video data module, What frequency range is better?

Accepted Answer

There are two versions on the different frequency range.
1st version’s frequency range is from 1420 Mhz to 1530 Mhz, with 110Mhz frequency width for FHSS.
2nd version’s frequency range is from 806 Mhz to 826 Mhz or 1420 Mhz ~1530 MHz, with only 20Mhz or 40Mhz frequency width for FHSS.
Our engineer recommended that you choose 1st version, as it can supply more frequent points to choose from when the signal is weak or interfered with.

Question 12

1. Can you show me this two-way data video link module real product video?

Accepted Answer

Yes, please check the blow video link at the youtube.

Video at Youtube

Question 13

2. Does this model support IP mesh? Is your full duplex link module support for signal relay?

Accepted Answer

This model support customizing the IP mesh function. There are three versions: 3km, 10km, and 50km according to build different the power amplifier.

Normal default full duplex link module support relay, you should buy at least three or more units. One unit is the transmitter, one unit as the receiver, and the other unit can put the middle between the transmitter and receiver as the relay/repeater/extender.

Question 14

3. Can you tell me how to connect your two-way data video link to the RF power amplifier?

Accepted Answer

The maximum RF transmission power of this two-way data video link module is 25±2 dBm, We also provides power amplifier to increase the RF Power to 2W/5W/10W. Below diagram shows how to add power amplifier outside of two-way digital data video link module.

Where is the IIC_SCL pin on the module?

Question 15

4. Can you show me what complete products by this wireless video data link module?

Accepted Answer

Yes, Please check the below link product, which is used the wireless video data audio two-way link module to assemble, just plus the Power ampleifier and encloser and accessory.

TX900

15km 30km 80km 150km long-distance wireless video transmitter receiver transmission transceiver PA 2W 5W 10W

Question 16

5. Can we monitor the module temperature By using web UI?

Accepted Answer

There was no function to query the temperature of the module.

Question 17

6. Can you sell the Morningcore module CX6600 to me? I want to assemble them by myself.

Accepted Answer

Sure. It is ok.
The Moningcore CX6600 (L1860C_P2P) is only an electronics module, you need to develop a peripheral circuit to support it, like power and ethernet and data Input Outport. And you also need to hire a software engineer to develop the firmware and UI for you.
As a trial sample, it is better that you can buy our complete products to test. After you test and use them, the quality is satisfied, then try to buy the module or parts to develop it by yourself. You can copy our design and improve it to be an excellent product.
After all, this is a radio transmission product, and any improper operation may interfere with the signal, resulting in shorter transmission distances.

Question 18

7. Regarding frequency- for testing, we will use 2.4 GHz. However, can we switch frequency bands to 1.4G or 800Mhz later if we change antennas to the right ones? As far as I understand this unit does not have PA.

Accepted Answer

Sure. support.
There is no optional frequency band of 2.4G modification on the web page, you need to send AT commands to modify or enter the Morningcore web page to modify.

Question 19

8. Do you have the exact dimension size? Special the fixing hole size by screw.

Accepted Answer

Question: Any recommendations on the PA + link module enclosure? Need an RF cavity filter? minimal box with cooling for the RF transistor?

Answer: The PA enclosure is CNC according to your design and construction. We used the electronic cooling fan. The encloser is a special CNC produced according to the UAV video data link module + Power Amplifier + cooling fan.

Please check the below picture. Our completed product, TX900, has only a link module + Power Amplifier and cooling fan.

https://i0.wp.com/ivcan.com/wp-content/uploads/2019/09/TDD-Transceiver-Model-T30P-2-watts-PA-power-amplifier.webp

Question 20

9. If I buy just a trial sample without the PA board what range will I get and is it possible to add PA later?

Accepted Answer

What range of the trail sample do you need?
We can offer you a 1~150 km range of the link module. You can add the PA later if you want. Min 15km and max 150km module cost is different.
The module can transfer the signal over 150km with the 10-watt PA to increase the signal. Without the PA, the transmission range is almost 10~15km.
If you buy one 15km range module, even you plus the PA, the range is almost 15~17 km range. The signal strength and ability of the anti-interference will increase much.

Question 21

10. How much current(amps )does the module draw?

Accepted Answer

The Power consumption is about 4W.
Current equals power consumption divided by supply voltage
4 / 12=0.33A, if you’re on a 12-volt supply.

Question 22

11. I need the 150 km transmission range wireless video data module, What frequency range is better?

Accepted Answer

There are two versions on the different frequency range.
1st version’s frequency range is from 1420 Mhz to 1530 Mhz, with 110Mhz frequency width for FHSS.
2nd version’s frequency range is from 806 Mhz to 826 Mhz or 1420 Mhz ~1530 MHz, with only 20Mhz or 40Mhz frequency width for FHSS.
Our engineer recommended that you choose 1st version, as it can supply more frequent points to choose from when the signal is weak or interfered with.

頻帶	2.4千兆赫(1Mbps的)	1.4千兆赫(1Mbps的)	800兆赫(1Mbps的)
20MHz帶寬	-99dBm的	/	/
10MHz帶寬	-102dBm的	-103dBm的	-103dBm的
5MHz帶寬	-104dBm的	-106dBm的	-106dBm的
3MHz帶寬	-106dBm的	-108dBm的	-108dBm的

• COFDM 調製和 H.264/H.265 視頻壓縮	XT30PW-M 連接器, 直流輸入:7可選距離等級
可選距離等級	4PIN ZH1.5mm 連接器
可選距離等級	可選距離等級
資料串口1	3PIN ZH1.5mm 連接器, TTL 3.3V
數據 UART2 和 UART3	6PIN PH1.25mm連接器, uart3作為控制串口和資料串口, TTL 3.3V
音訊輸入和輸出	4PIN PH1.25mm連接器
USB	微型 USB 連接器, 用於軟體升級
轉變	外部功率放大器的 TX/Rx 控制訊號
主天線	TX/Rx 天線端口, IPEX
第二天線	可選距離等級, IPEX
12輸出電壓	板載12V輸出(<150毫安), 用於冷風扇電源
電源指示燈	紅, 正常供電時燈亮
節點引導	藍色的, 收發模組作為接收節點時燈亮; 收發模組作為發射節點時閃爍
連結 LED	燈滅 – 表示該節點未連結到無線網絡; 紅燈——表示該節點已鏈接, 但無線訊號弱; 橙色燈 – 表示該節點已鏈接, 無線訊號中等; 綠燈－表示該節點已鏈接, 無線訊號強.

銷	信號	描述
音頻輸入	默認在線(指定麥克風輸入)	音訊將被傳送到目標無線遙控模組.
音頻輸出	線路輸出, 驅動耳機	當節點從遠端無線模組接收音訊資料時, 音頻將在此 PIN 上播放.
GND	GND	GND
控制	軟件定義	音頻輸入的開/關開關控制

工作頻段	1428~1448MHz 或 802~826MHz
信道帶寬	1.4MHz/3MHz/5MHz/10MHz/20MHz
調製方法	QPSK / QAM16 / QAM64
發射功率	300毫瓦, 2W¯¯, 5W¯¯
組網方式	點對點, 點對多點星形網絡
傳輸距離	空對地15公里, 30千米, 50千米, 80千米, 100千米
數據接口	2 網絡端口 + 1 串行端口
無線傳輸速率	最大 25Mbps, 雙向傳輸中所有節點共享.
天線接口	2 SMA連接器
電源	7電壓~30V (推薦12~28V)
尺寸	1025221.5毫米 (僅限 PCBA)
重量	127 克

27千米 110千米 NLOS 常問問題

最熱 HDMI 超低延遲 常問問題

無線圖傳模塊

FPV TX RX模塊板

CVB到IP視頻編碼板

無線無線電鏈路模塊

HDMI到IP編碼板

雙向無人機無線視頻數據RC Control Link模塊遠距離雙向收發器Transmitter-Receiver Vcan1681

雙向無線傳輸數字數據視頻鏈路模塊 DLB

特徵

靈敏度

接口定義

規範

常見問題

TX900

還有一個問題?

更多常見問題解答

相關貼文

1 審查雙向無人機無線視頻數據RC Control Link模塊遠距離雙向收發器Transmitter-Receiver Vcan1681

我要點評

感謝你的回應。 ✨

感謝你的回應。 ✨

27千米 110千米 NLOS 常問問題

最熱 HDMI 超低延遲 常問問題

無線圖傳模塊

FPV TX RX模塊板

CVB到IP視頻編碼板

無線無線電鏈路模塊

HDMI到IP編碼板

雙向無人機無線視頻數據RC Control Link模塊遠距離雙向收發器Transmitter-Receiver Vcan1681

雙向 無線傳輸數字數據視頻鏈路模塊 DLB

特徵

靈敏度

接口定義

規範

常見問題

TX900

還有一個問題?

更多常見問題解答

相關貼文

1 審查 雙向無人機無線視頻數據RC Control Link模塊遠距離雙向收發器Transmitter-Receiver Vcan1681

我要點評

感謝你的回應。 ✨

相關產品

最熱 HDMI 超低延遲常問問題

雙向無線傳輸數字數據視頻鏈路模塊 DLB

1 審查雙向無人機無線視頻數據RC Control Link模塊遠距離雙向收發器Transmitter-Receiver Vcan1681