PA功放
PA RF Power Amplifier for DVB-T COFDM TX Transmitter transmission 1-watt 2-watt 5-watt 10-watt 20-watt 30-watt 40-watt 50-watt Frequency Customization 170-3000Mhz (1.4G 2.4G 3G)
目錄
定制
How many power watts do you need?
What frequency range do you need?
Does the power amplifier need -10dBm input?
pa功放射頻模塊實現射頻信號的功率放大輸出. 當輸入電壓為12V, 連接到 COFDM 調製板, 輸出功率可以達到1W (+30dBm的)
特徵
- 工作頻段: 300兆赫〜360MHz的 (更頻率可調)
- 獲得: 45分貝
- 噘: +33dBm的 (PAR =9.9分貝)
- ACPR: < -36dBc的
- IP3: +49dBm的
- 噪聲係數: 6分貝
- 電源電壓: 12V, 輸出1W (+30dBm的) 發射功率, 功耗約為8.7W.
- RF接口: SMA外螺紋孔
規範
電氣規格@ + 25℃,ZS = ZL =50Ω,VCC = 12V
參數 | 單元 | 最低限度 | 典型 | 最大 |
頻率範圍 | 兆赫 | 300 | 可選的 | 360 |
小信號增益 | D B | 45.0 | ||
增益平坦度分貝 | D B | +/-0.5 | ||
輸出功率 Pout @Pin=-15dBm | dBm的 | 30.0 | ||
IP3 dBm的 +49 | dBm的 | 49.0 | ||
ACPR(WCDMA PAR =9.9分貝) | dBc的 | -40 | ||
反向隔離 | 分貝 | -45 | ||
噪聲係數 | 分貝 | 4 | ||
效率(著臉= + @高達39dBm 470MHz的) | % | 13.8 | ||
VSWR輸入 | 1.3:1 | |||
產量 | 2.0:1 | |||
直流電源 | V | 7.4 | 10.0 | 12 |
電源電流 (靜) | 毫安 | 300.0 | ||
尺寸 | 35.1毫米×18.1毫米X0.6毫米 |
可選頻率
PA1W330 頻率300〜360MHz的
PA1W470 頻率450〜500MHz的
PA1W550 頻率544〜564Mhz
PA1W600 頻率580〜620MHz的
PA1W700 頻率680〜720MHz的
定制2W
絕對最大額定值
參數 | 絕對最大 |
RF輸入功率 | -5.0 dBm的 |
電源電壓 | +14V |
工作溫度 | -40℃至+ 65℃ |
儲存溫度 | -55℃至+ 100℃ |
2~3W COFDM 功率放大器
該放大器為2~3W Sub-1GHz線性功率放大器, 專為 COFDM 發射機應用而設計. 該擴大機採用緊湊而堅固的設計.
2-3W COFDM功率放大器特點
- 獲得: ≥41±1分貝
- 最大射頻輸入功率: -8±1.0 dBm的
- 射頻功率輸出 33~35dBm(2~3W)
- ACPR: < -35dBc的
- 阻抗: 50歐姆
- 直流電源電壓: 12~17VDC
- 能量消耗: <18W¯¯
- 射頻輸入: SMA 母頭連接器 (SMA-50KFD)
- 射頻輸出: SMA 母頭連接器 (SMA-50KFD)
- 外形尺寸: 81x48x14mm
- 重量: 90G
- 頻率範圍: 中心頻率160MHz~900MHz(XT30PW-M 連接器)
- 帶寬: 30MHz 至 40Mhz
5W COFDM 功率放大器
5 瓦特 cofdm 功率放大器特點
- 獲得: ≥45分貝
- 最大射頻輸入功率: -8 dBm的
- 射頻功率輸出 37dBm
- ACPR: < -35dBc的
- 阻抗: 50歐姆
- 直流電源電壓: 12~16VDC
- 能量消耗: <30W¯¯
- 射頻輸入: SMA 母頭連接器
- 射頻輸出: SMA 母頭連接器
- 外形尺寸: 94x58x14mm
- 重量: 136G
- 頻率範圍: 中心頻率200MHz~900MHz(XT30PW-M 連接器)
- 帶寬: 30MHz 至 40Mhz
常見問題
請告訴我您需要15W功率放大器的頻率範圍? 如果您的需求與我們的庫存不匹配, 客製化需要2~3週.
好, 請在這裡查看.
題: Can you show OUT +12V IN only?
回答:
- It would be best to have the technical parameters and specifications of the amplifier written on the casing like we currently have in the above picture.
- One day in the future, when you need to return it to the factory for repair, our engineers can repair or replace it according to the specifications of the shell.
- If there are no these words on the shell, we have no way to provide after-sales technical support.
題: Can you please not print the production date on the casing?
回答: We provide 12 months quality guarantee. The production date on the casing is an important basis for after-sales service.
- Each PA has a center frequency point. The PA can work normally within a certain frequency range, but its performance is the best at the center frequency point.
- The frequency range of PA is +-15Mhz of the center frequency. If the center frequency point is 600Mhz, then this PA frequency range is 600Mhz, + / -15兆赫, from 585Mhz to 615Mhz.
- The max frequency range is 10% of the center frequency point.
例如, if you choose the working frequency of 500Mhz, then the frequency range is 10% of the frequency, so the frequency range should be 50Mhz, from 475~525Mhz.
-
The current will increase and it will not be damaged, but no load and short circuit for a long time are not recommended.
-
Our Engineers are worried about burning out the filter after the power amplifier. High power for a long time will cause the filter to heat up.
-
The power amplifier has no load and short-circuit protection circuits.
下載
功率放大器2~3W (160~900Mhz 功率放大器)
PA 5W (160~900Mhz 功率放大器)
擴音器10W (160~900Mhz 功率放大器)
題: 你能給我看看你的射頻線性功率放大器的真實照片嗎?
回答: 當然, 請檢查下面的圖片.
評測
沒有評分.