535MHz遠程COFDM無線音頻發射器和接收器1U 2U使用車內使用

目錄
特徵
- 535MHz or 595Mz, 其他頻率可客製化. (170Mhz~860Mhz customize support, higher working frequency need to add frequency down converter at the receiver side)
- The transmitter or receiver metal box is customized. (1U or 2U or other type design)
- Built-in 10W or 20W amplifier. Other power amplifiers can also be customized according to your project requirements.
- The project setup is customized according to the customer’s requirements, with the vehicle-mounted long-range COFDM wireless audio transmitter installed on a moving car and the receiver installed on a fixed high-rise building/tower.
- The audio input interface can directly connect a microphone.
- One-button switching between audio only or both audio + 視頻輸入.
- The transmitter’s single transmitting antenna and the receiver’s two receiving antennas have built-in band-pass filters to shield clutter interference to or from other devices.
- The transmitter and receiver are equipped with audio output or output interface on the front and back for user convenience.
- V1/V2 switch button, 僅音頻 / 音頻 + video optional source on the transmitter.
Metal box Inside


Default TX RX Setting
完整的配件

使用注意事項
- 警告: Please connect only one of 110~240V and 28V on the transmitter. Please connect only one of 110~240V and 12V on the receiver.
-
該 DC power supply of the transmitter is 28V, 4一個, and the receiver is powered by 12V.
-
該 power switch on the front panel of the transmitter controls 110-240V AC. The DC power supply of the transmitter rear panel is connected to the car battery or battery for direct power supply. (28VDC has no power switch control)
-
The 110-240V and 28V of the transmitter cannot be powered at the same time, choose one of them.
-
A1/A2 on the front panel of the transmitter switches the front microphone input or the rear panel microphone input. Pressing the button is the microphone audio input of the front panel of the transmitter, connected to the built-in amplifier. For non-powered microphones.
-
Press A1/A2 on the front panel of the transmitter again for the microphone audio input of the rear panel of the transmitter, not connected to the built-in amplifier board. Suitable for powered microphones.
-
V1/V2 on the front panel of the transmitter switches audio or audio + 視頻輸入. The transmitter CVBS has video transmission, and if you press it again, there is no video input, the video displays a white screen, and only sound is transmitted.
-
Because the microphone is mono, the microphone on the transmitter is used for right channel input by default, and the receiver audio output must also be connected to the right channel output. If your microphone is connected to the left channel, then the receiver also needs to be connected to the left channel audio output.
-
發射器前面板音頻輸入和後面板音頻輸入不能同時使用.
常問問題
1. 什麼是535MHz的遠程COFDM無線音頻發射器和接收器?
一個535MHz的遠程COFDM無線音頻發射器和接收器是一個專業級的系統, 長距離遠距離的高質量無線音頻傳輸, 通常用於車輛或移動設置. 它具有僅用於音頻的開關或視頻+音頻無線傳輸.
2. 該COFDM無線音頻系統的傳輸範圍是多少?
這個20wpa 20 瓦特功率放大器COFDM無線音頻系統可以實現傳輸範圍 1公里至3公里 根據環境條件和天線配置在地面上.
3. 這是535MHz COFDM音頻發射器,適用於車載安裝?
是, 該 1U和2U機架安裝的設計 are tailored for in-car use, providing robust wireless audio links while on the move.
4. What is the main frequency band of this wireless audio transmitter and receiver?
The primary operating frequency is 535MHz UHF band, suitable for long-distance, low-interference wireless audio transmission. Other frequency 170-860Mhz can be customized. Over 860Mhz, we have added a 頻率下轉換器 on the receiver.
5. What is COFDM technology in wireless audio transmission?
COFDM (編碼正交頻分複用) ensures reliable audio transmission even in NLOS (非視距的視線) and mobile conditions.
6.Can I use the 535MHz COFDM system for live event audio streaming?
是, 它非常適合 live event audio, mobile production, and vehicle-based operations, ensuring stable and clear audio transmission.
7.What are the audio quality specifications of this COFDM transmitter?
它支持 high-fidelity audio with low latency, suitable for professional broadcast and communication applications.
8. What is the power output of the 535MHz COFDM transmitter?
Depending on the demands of your project, it typically offers 高達5W, 10W¯¯, 20W或 50W 射頻輸出功率, enhancing the transmission distance.
9. What types of antennas can I use with this transmitter and receiver?
兩個都 omnidirectional and directional antennas can be used to optimize coverage and range. On the transmitter, we offer an 80cm fiberglass omnidirectional transmitter antenna, on the receiver, there are including two 180cm omnidirectional receiver antennas. See full set picture
10. Is the system compatible with standard professional audio equipment?
是, 它支持標準 XLR (麥克風) and RCA audio interfaces, ensuring broad compatibility with audio mixers and recorders.
11. What is the latency of the 535MHz COFDM wireless audio system?
它的特點是 超低延遲 中 100-300 毫秒, 適合實時應用.
12. Can this system transmit both analog and digital audio signals?
是, it can transmit both analog and digital audio signals, providing flexibility in integration.
13. Does the 535MHz COFDM receiver require a special power supply?
The receiver typically operates on 12V or 110~240V DC, suitable for vehicle power systems.
14.Is the 1U or 2U form factor customizable?
是, customized enclosures and configurations are available to fit specific in-car or stationary setups.
15. Is encryption available for secure audio transmission?
是, the system can integrate 可選距離等級 to protect audio data over the wireless link. You can enter your defined password via the transmitter’s parameter configuration tool.
16. How does COFDM prevent audio signal interference?
COFDM的 multi-carrier modulation and error correction minimize interference and signal dropouts in complex RF environments.
17. Can this wireless audio transmitter and receiver be used in emergency vehicles?
絕對地, it is perfect for 警車, 救護車, and other emergency vehicles for secure audio links.
18. Is the system resistant to multipath interference?
是, the COFDM modulation is inherently resistant to 多徑干擾, maintaining audio integrity.
19. What is the weight of the 1U and 2U COFDM wireless audio units?
The weight varies, but typically the 1U receiver weighs around 3-4kg, 和 2U transmitter around 5-6kg.
20. Can the system be operated while the vehicle is moving?
是, it is designed for mobile use, ensuring stable audio transmission even at high speeds.
21. What kind of maintenance does the COFDM wireless audio system require?
它需要 minimal maintenance, primarily keeping connections clean and ensuring firmware is up to date.
22. Does the 535MHz system support duplex communication?
沒有, it if simplex communication one-way transmission. Please choose other models to support duplex communication.
23. What input/output audio connectors are provided?
平時, 它提供 balanced XLR, 3.5mm jacks, and RCA connectors for versatile connectivity. (定制)
24. Is this system compatible with COFDM video transmitters?
是, there are V1/V2 switch button. Press it once, and it is a wireless audio transmitter. Press two times. It is a wireless audio / 視頻傳輸器.
25. What are typical applications for the 535MHz COFDM wireless audio system?
Applications include vehicle-to-vehicle communication, mobile news broadcasting, 緊急服務, 和現場活動.
26. Can this system operate in dense urban environments?
是, COFDM is well-suited for 城市環境, with high resistance to reflection and signal blockage.
27. What power consumption should I expect?
Power consumption ranges from 20W至50W, depending on transmission power and model specifications.
28. Is this product compliant with international RF standards?
是, it complies with FCC, EC, and other regional RF regulations.
29. What’s the typical operating temperature range?
It operates reliably between -20°C 至 +80°C, ideal for in-vehicle or outdoor use.
30. Can I integrate this system into an IP network?
Some models offer IP streaming capabilities via Ethernet, for hybrid analog/digital solutions.
31. Is remote configuration supported?
There are a parameter configuration tool menu and screen on the transmitter and receiver’s metal box.
32. What is the maximum number of audio channels supported?
通常, 它支持 one audio channels, but customization is available for more.
33. 是否可以自定義頻率範圍?
是, 頻率範圍可能是 在UHF頻段170-860MHz中進行量身定制, 取決於區域法規.
34. 535MHz COFDM的音頻傳輸有多安全?
和 加密和誤差校正, 變速箱可抵抗竊聽和信號損失.
35. 系統如何處理信號撤離?
內建 自動重新同步和錯誤校正 確保在臨時信號損失期間的影響最小.
36. COFDM音頻發射器是否支持GPS集成?
沒有. 它沒有任何GPS功能.
37. 車輛的安裝過程是什麼?
安裝很簡單: 機架安裝單元, 連接電源, 天線, 和音頻來源.
38. 該系統可以在海洋環境中使用嗎?
是, 使用適當的天線和電源, 它可以在 船或船隻. 也可以考慮使用防水且防水的密封封面.
39. 535MHz頻率如何幫助長距離音頻傳輸?
該 535MHz UHF band 提供範圍和穿透性的良好平衡, 適合 遠程溝通.
40. 1U和2U版本有什麼區別?
該 1U版本更緊湊, 而 2u可能包含更多功能, 更高的功率, 或雙通道.
41. 是否有電池供電的版本的此無線音頻系統?
通常, 這些是車輛驅動的, 但 自定義電池解決方案 可以設計.
42. 該產品保修多長時間?
大多數單位都帶有 1-年保修, 有可用的擴展選項. 終身免費維護.
43. 我可以將此系統用於私人無線電網絡嗎?
是, 適合 私人音頻通信網絡 具有可配置的頻率.
44. 音頻信噪比是多少 (SNR)?
它提供了 超過70dB的SNR, 確保清晰的音頻質量.
45. 有沒有辦法監視信號強度?
是, 接收器功能 信號強度指標 通過LED或數字顯示. 鎖定意味著信號已鎖定.
46. 我可以升級COFDM系統的固件嗎?
是, 固件更新 為增強性能和新功能提供了.
47. 運輸尺寸和包裝是多少?
標準包裝包括 固定泡沫蓋盒子, 尺寸隨模型而變化.
48. 是否具有抗振動和衝擊的產品?
是, 底盤被設計為 堅固耐用, 非常適合使用車輛.
49. 535MHz音頻系統可以與視頻監控系統集成嗎?
是, 它可以與 無線視頻傳輸系統 用於組合的AV解決方案.
50. 我在哪裡可以購買535MHz COFDM無線音頻發射器和接收器?
您可以直接從我們那裡購買, 專門的RF通信設備.



iVcan.com –
我一直在使用 10 watts power amplifier 535MHz long-range COFDM wireless audio transmitter with video switch and the 1U receiver / 2U transmitter for in-car use, and I am very pleased with its performance. The system delivers strong, stable signals with excellent audio and video clarity, 即使是長距離. The COFDM technology ensures smooth transmission without interference or dropouts, which is very important for professional applications. The video switch function is convenient and makes operation flexible. 構建質量紮實, and installation in the vehicle was straightforward. 全面的, this product is highly reliable and enhances in-car wireless communication and media transmission.