如果錯過了 Lilliput GK7000 固件恢復出廠默認設置, 緊急解決方案軟件下載

Lilliput GK-7000 show error

Lilliput GK7000 firmware recovery the factory default if missed, emergency solution software download
如果錯過了 Lilliput GK7000 固件恢復出廠默認設置, 緊急解決方案軟件下載

If your Lilliput GK7000 devices show the above picture of startup wrong, please try to download the factory restore firmware.

Lilliput GK7000 upgrade steps

  1. Please download the upgrade firmware from the below link. https://drive.google.com/file/d/1GYmpZkDTz4LpFseNKdakgU7Vk8ZEfHSy/view?usp=sharing
  2. Prepare a one-piece Kingston 4G SD or 8G SD card, 請把文件“NK.bin》複製到SD卡. 注意: 請不要刷寫與 GK-7000 無關的文件, 否則會損壞顯示器.
  3. 將“nk.bin”SD卡插入GK7000插槽, to give the power to GK7000. As shown in the below image, show you the upgrading progress bar. Please wait until 100%.
  4. 如果完成, 顯示器會自動進入系統. 然後取出SD卡.
  5. Upgrade OK and you will see that it is ok now.
Lilliput GK7000 firmware recovery the factory default if missed, emergency solution software download 17
Lilliput GK7000 firmware recovery updating

GK-7000 Upgrade firmware download

GK-7000固件恢復出廠默認Lilliput GK7000 firmware recovery the factory default if missed, emergency solution software download 18

How to get the printing information?

The most important step in troubleshooting is to turn on the power to obtain the RS232 serial port printing information. Then send the printed information to us for analysis.

How to operate and steps 指導?

1. 設置

  • 下載 GK-7000 serial port tool.
  • Copy the file named DNW.exe on the PC, then open this file;
  • 第一, click “Configuration → Options” on the menu and enter the settings window.
  • 然後, set the COM port number (the COM port number will be decided by the COM port that RS232 connects to the PC), 波特率: 115200. Download Address: 0x32000000;
  • 最後, Click “OK” to exit this setting window.
Lilliput GK7000 firmware recovery the factory default if missed, emergency solution software download 19

2. Click the “Serial Port → Connect” on the menu to open the COM port.

Lilliput GK7000 firmware recovery the factory default if missed, emergency solution software download 20

3. Keep pressing the “ESC” key on the keyboard, 同時, power on the
PC745/GK7000, then the DNW window will print the related information shown below.

Lilliput GK7000 firmware recovery the factory default if missed, emergency solution software download 21

Finish!

常問問題

Q1: What should I do if we downloaded and upgraded your firmware, but did not solve the problem?

A1: Please give us the serial number of every defective unit, our engineer will check the hardware and firmware version of your existing one. We will offer you the relatively upgraded firmware.

7 英寸嵌入式PC移動數據終端MDT觸摸屏面板GK-7000

2 關於“如果錯過了 Lilliput GK7000 固件恢復出廠默認設置, 緊急解決方案軟件下載

  1. familybck2023 說:

    Lilliput GK-7000 Red light On board and yellow light on power button and no diplay show what is problm in this situation

發表評論

您的電子郵件地址不會被公開. 必需的地方已做標記 *

發現更多來自 iVcan.com

立即訂閱以繼續閱讀並存取完整檔案.

繼續閱讀

在 WhatsApp 上需要幫助?