30-מילי-שנייה Drone UAV HDMI משדר וידאו אלחוטי
Ultra-low-latency 30~40 millisecond UAV HDMI Wireless Video Transmitter Drone wireless transmission system for Drone Camera Vcan1729
The latency of a regular COFDM transmitter and receiver is 200-300 אלפיות.
This wireless video transmitter and receiver system has a delay time of less than 30 אלפיות.
תוכן העניינים
מאפיין
- מאוד משולב, עיצוב משולב מודולרי
- אמץ טכנולוגיית אפנון COFDM
- FPGA-based H.265 video compression technology
- עיכוב וידאו נמוך במיוחד (עיכוב מערכת השידור פחות מ 30 אלפיות)
- תקשורת כל ימות, לא מפחד בניית קירות
- תקשורת בין נסיעות במהירות גבוהה,
- מארז אלומיניום עם גוף קירור, עמיד בפני זעזועים ועמיד בפני מכות
- ללא קו ראייה (NLOS) שידור נייד, עם מרחק של לא פחות מ 20 קילומטרים בתנאי קו ראייה
- מהירות התנועה המקסימלית יכולה להגיע ל -600 קמ"ש (נמדד)
- התאמה אישית מלאה זמינה
יישום
- It is used for drones that fly at high speed and require a video quality of 1080P.
- This product was mainly used by public security and security inspection departments for technical reconnaissance and forensics.
- Broadcasting includes radio and television live broadcasts, sports broadcasts, חדשות חברתיות, and more.
- זה מתאים לשידור נייד בזמן אמת של תמונות באיכות גבוהה בעירוני, יָם, mountain, וסביבות מורכבות אחרות.
מִפרָט
UAV HDMI Wireless Video Transmitter
מצב אפנון | COFDM |
מתח עבודה | DC11V~DC18V |
עבודה נוכחית | 1 וואטס PA:≤1.7A DC12V; 2-וואטס PA: ≤2.3A DC12V; 5-וואטס PA: ≤3.0A DC12V |
ממשק בקרה | ממשק RS232 סטנדרטי, 8 פיסות מידע, 1 עצור קצת, זוגיות אפילו, קצב שידור: 19200 |
ממשק נתונים שקוף | שידור יציאה טורית שקופה חד כיוונית, 8 פיסות מידע, 1 סיבית עצירה, תומך בשמירה על שוויון מוזר, זוגיות אפילו, זוגיות אלחוטית, קצב שידור: 1200, 2400, 4800, 9600, 19200, 38400, 57600,230400 |
שיטת הצפנה | 128-מעט הצפנת AES |
Modulation Mapping | QPSK (4QAM), 16QAM, 64QAM |
Forward Error Correction | 1/2 2/3 3/4 5/6 7/8 |
משמר מרווח | 1/32 1/16 1/8 1/4 |
מספר ספק | 2K |
Frequency Bandwidth | 2/3/4/5/6/7/8M מתכוונן |
Transmission Code Stream | 2000kbs ~ 20000kbs מתכוונן |
Transmission Power Amplifier | 1 וואטס, 2 וואטס, 5 וואטס, 10 וואטס, 20 וואטס (אנחנו יכולים להתאים עבורך) |
Transmission Frequency | ניתן להתאים אישית בכל תדירות, ניתן לכוון את התדר באופן רציף, הצעד הוא 1MHz |
Power Flatness | פחות מ-0.2dB בפס 10MHz |
Band Shoulder Ratio | היחס טוב יותר מ-30dB כאשר הספק המוצא הוא 36dB |
Second-Harmonic | פחות מ-60Db |
MORE | 32Db |
וִידֵאוֹ | 720 50P, 720 60P, 1080 24P, 1080 25P, 1080 30P, 1080 50P, 1080 60P |
High-Definition Input | HDMI 1080P |
Video Coding Format | קידוד רך H.265 מבוסס FPGA |
לְעַכֵּב | עיכוב מערכת השידור פחות מ-30ms, עיכוב מקצה לקצה |
מַתֶכֶת | מִינִימוּם, נגד קורוזיה, עיצוב נגד רעידות |
מֵמַד | 95*75*45מ"מ |
מִשׁקָל | 0.248ק"ג |
UAV HDMI Wireless Video Receiver
- When the above toggle switch is turned to PC, the serial port data is output from the external red, לבן, and black three-wire connection, which can be connected to the computer; when it is turned to LCD, the serial port data is output to the LCD screen on the receiver.
- The toggle switch below is the power switch for the LCD screen that comes with the receiver.
ion mode | QPSK, 16QAM, 64QAM (אופציונאלי) |
תיקון שגיאות קדימה | 1/2, 2/3, 3/4, 5/6, 7/8 (אופציונאלי) |
מספר מובילים | 2k, |
משמר מרווח | 1/32, 1/16, 1/8, 1/4 (אופציונאלי) |
פענוח וידאו | H.265 |
יחס גובה-רוחב | 4:3 16:9 |
תמונת וידאו | 1080P@60P, 50P, 50אני, 30P, |
מתח עבודה | AC220V/DC12V <0.9א |
טמפרטורת עבודה | -20℃ ~ + 50 ℃ |
גודל מראה | 480*260* 45 (1שלדה U) |
Device Weight | 0.466ק"ג |
אבזר
שאלות נפוצות
דגם זה הוא זמן האחזור הנמוך ביותר שלנו עבור משדר ומקלט וידאו אלחוטיים של מזל"ט.
זה תומך ב השהיה הנמוכה ביותר של 28 מיליסניות. (לא כולל זמן תצוגת המצלמה והצג)
COFDM-912T, CVBS RCA 720P Video Input, 200~400 millisecond.
COFDM-908T: כניסת HDMI, 200~300 millisecond.
Vcan1729: כניסת HDMI, 20~40 millisecond. suitable for drone.
ה 1729 model is ultra-low latency, which is very suitable for drones. It can detect obstacles in time, such as houses, trees, wires, וכו ', and avoid them in the shortest time. Many drone factories in China have adopted this video transceiver system.
- Please note that this transmitter only supports HDMI 1080P or 720P input, it does not support HDMI1080i or 720i input.
- In order to decrease the latency delay, the HDMI is not including the Audio signal. Please tell me if you need it, We will make a special firmware for your order, but the latency delay will be longer than HDMI only have video signal.
- Please also note that for the HDMI used by the drone camera, please use extremely thin and anti-interference HDMI cables. Ordinary household HDMI or cheap HDMI cables may cause unexpected failures.
-
What's the distinction between 1080p and 1080i?The two display systems (1080p ו-1080i) can both display 1920x1080 pixel images, although they do so in different ways. The letters "אני" ו "p" refer to the manner in which the images are displayed. 1080i stands for "interlaced scan" and 1080p is for "progressive scan."
How to connect Vcan1729, HDMI Wireless Video Transmitter and Receiver
- Please connect the antenna first before you power on the transmitter and receiver, otherwise the Power Amplifier inside is easy to be burned.
- The parameter configuration board tool does not need to connect when you are testing.
- The power supply of the transmitter and receiver is better to use 12V 3A.
- There is two long receiver antennae and one short antenna for the transmitter. Although you do not need our transmitter antenna, please ensure that the transmitter antenna covers the frequency of 595Mhz. 595Mhz is the center working frequency.
- In the package, there is one HDMI. It is high-quality HDMI cable for drone or robot use.
- On the receiver, there are two switches on the side. (at the first time to test, please don’t move the switch and no need connect the UART cable to other devices)
PC-LCD: UART cable operate from the computer or LCD on the receiver, there is one LCD menu. If you put the CTRL switch on the LCD side, then the receiver parameter can be adjustable by menu, if you put the CTRL switch on the PC side, then the receiver parameter can be adjustable by computer, you need connect the UART cable to the computer.
LCD power: כבוי / עַל, it can power on or off the small screen on the receiver, after change the receiver parameter, maybe you want to power off the screen displayer to save the power
- For testing, just connect the two receiver antenna on the RF1 and RF2, HDMI output to your HDMI monitor and give it power at 12V
- For testing, just connect the one transmitter on the RF, HDMI cable to connect to your HDMI camera, and give it power at 12V.
- Please contact us if you have any question, or show us the picture or video to us, we will offer you any further information.
מדריך למשתמש
Packaging size:127*27*12ס"מ
מִשׁקָל:8.5ק"ג