UVC USB 카메라 - IP 이더넷 스트리밍 인코더 보드 H.265/H.264 1080P60

UVC USB 카메라 - IP 이더넷 스트리밍 인코더 보드 H.265/H.264 1080P60

개요

그만큼 UVC USB 카메라 - IP 이더넷 스트리밍 인코더 보드 is a high-performance video encoder module designed to convert USB camera video ~ 안으로 IP network streams 실시간으로.
지원합니다 H.265/H.264 압축, 보장 초저지연, high image quality, and low bit rate transmission. With wide power input, USB 포트, and support for RTSP, 온비프, GB28181, and P2P protocols, this encoder board is perfect for 드론, 로봇, industrial vision systems, and remote video conferencing.

---

풍모

1. Real-Time USB to IP Encoding — Converts UVC USB camera video to network stream over Ethernet.

2. Supports H.265/H.264 compression for low bandwidth and excellent HD quality.

3. Full HD 1080P@60fps encoding, 최대 4K@30fps HDMI output (via expansion board).

4. USB 포트 — Supports one USB camera or Wi-Fi/4G module expansion.

5. 양방향 오디오 인터콤 — Built-in G.711/AAC audio codec for full-duplex communication.

6. 다중 프로토콜 지원 — RTSP, 온비프, GB28181, P2P, HTTP, RTMP, TCP/IP, DHCP.

7. AI and OSD Customization — Supports NPU-based AI algorithm integration and OSD overlay.

8. 유연한 전원 공급 장치 — DC 6–12V or PoE input supported.

9. Open Player SDK — Enables easy integration with custom platforms for secondary development.

10. 컴팩트한 사이즈 — Only 38×38mm, with anti-static and surge protection design.

---

명세서

Recommended Player

---

응용

• UAV / 드론 – Real-time aerial video streaming and monitoring.

• Industrial Robots – Vision-based positioning, 점검, and automation control.

• Unmanned Vehicles (UGV/USV) – Network video transmission for navigation and remote operation.

• Network Video Conferencing Systems – Converts standard USB webcams into IP cameras.

• Microscopy / Electronic Magnifiers – High-definition visual output for laboratory and educational use.

• AI Vision Projects–Supports algorithm customization for smart recognition and analytics.

---

자주하는 질문

큐: What is the default IP configuration for the device?
에이: The device’s default IP address is 192.168.1.188. If the IP address has been changed and is unknown, you can still locate the device on the network:

1. Connect the device (인코더 보드) to your computer using an Ethernet cable.
2. Use the utility tool IPCSearchTool to scan the network. IP Search-EN-V1.0.61 Download
3. The tool will detect the device and display its current IP address.
4. Enter the detected IP address into a web browser.
5. You will then be able to access the device’s configuration interface and live video preview page.

This method allows you to regain access even if the network settings have been modified.

큐: What user ID and password are needed to log in to the web interface?
에이: The default login credentials for the device web interface are: 사용자 이름: 관리자 비밀번호: 관리자 .

큐: We are interested in the Player SDK. Can we receive and display the video stream in our own software?
에이: 예. We can provide the PC Player SDK source code, which enables customers to receive and display video streams in their own software applications and perform custom integration or secondary development as needed.

다운로드 링크: PC Player SDK Source Code

Please note that the SDK is provided for independent development purposes only. We do not provide technical support, customization services, or engineering assistance for secondary development based on the SDK source code.

Q1: What type of USB cameras can be used?
A1: 지원합니다 UVC-compliant USB cameras, including visible light and thermal imaging models.This device is designed to convert USB camera signals into IP streams.

2분기: Does it support Wi-Fi or 4G connectivity?
A2: 예, one of the USB ports can be used for a Wi-Fi or 4G expansion module (extra cost).

Q3: Can it be used for AI image processing?
A3: 예, the module integrates an NPU (0.5 탑) that supports AI algorithm customization.

4분기: Is SDK provided for software integration?
A4: 예, we provide an open player SDK PC용, 이동하는, 및 임베디드 시스템.

Q5: Can this module output HDMI video simultaneously?
A5: 예, 그것은 지원한다 HDMI 1080P60 output via an additional interface board.

Q6: 사용 가능한 전원 옵션?
A6: 지원 DC 6–12V input and PoE power supply 유연한 배포를 위해.

Q7. Can I connect a second USB camera via a USB hub or the USB0 port?
A7: 아니. The system currently supports only one USB camera input.
Even if you use a USB hub or attempt to connect through the USB0 port, the device cannot process or switch between two simultaneous USB camera inputs.

Q8. Does the system support dual-camera USB capture?
A8: 아니. Dual USB-camera input is not supported at this time. The system provides: One USB camera video input, and One network video stream output (IP 스트림), Additional USB video channels are not available.

Q9. What can be connected to the half-flex (half-pitch) cable connectors?
A9: The half-flex cable connectors are designed for factory-defined internal interfaces only, ~와 같은: Internal debugging ports, Extension modules,Specific hardware functions reserved for system integration. These connectors are not intended for externally connecting additional USB cameras or third-party devices.

Q10. Can I enable multi-camera support through firmware updates or custom settings?
A10: 현재, multi-USB-camera support is not available and cannot be enabled through firmware. The hardware architecture is designed for single-camera USB input.

Q11: What is the purpose of the battery on the encoder board?
A11: The battery powers the on-board RTC (Real-Time Clock). The RTC keeps track of the system date and time even when the device is powered off, ensuring accurate timekeeping for functions such as timestamping recorded video or scheduling tasks.

Q12: What is the resolution of the analog video output?
A12: This USB-to-CVBS/video streaming encoder board outputs analog video with the following resolutions:

• 단짝: 720 × 576 픽셀

• NTSC: 720 × 480 픽셀

Q13: Does the board provide both analog and IP outputs simultaneously? How is it determined which output is used?
A13: 예, this USB UVC camera video encoder board supports simultaneous CVBS (비슷한 물건) and IP/Ethernet video output. Both outputs can work at the same time, allowing you to monitor video via analog displays while streaming over the network. There is no need to switch between outputs; the board automatically provides both.

Q14: We want a working temperature range of -30°C to +50°C. Is this possible?
A14: 예, we have conducted dedicated testing, and the board has been verified to start up and operate normally at -30°C and continue functioning correctly at +50℃.

---

상대 게시물

1. How to set UVC USB to IP Encoder for YouTube Live Stream?