Kamera USB UVC ke Papan Encoder Streaming IP Ethernet H.265/H.264 1080P60

Kamera USB UVC ke Papan Encoder Streaming IP Ethernet H.265/H.264 1080P60

Ringkasan

Itu UVC USB Camera to IP Ethernet Streaming Encoder Board is a high-performance video encoder module designed to convert USB camera video ke dalam IP network streams in real time.
Ini mendukung H.265/H.264 compression, memastikan latensi sangat rendah, high image quality, and low bit rate transmission. With wide power input, port USB, and support for RTSP, ONVIF, GB28181, and P2P protocols, this encoder board is perfect for drone, robot, industrial vision systems, and remote video conferencing.

---

Fitur

1. Real-Time USB to IP Encoding — Converts UVC USB camera video to network stream over Ethernet.

2. Supports H.265/H.264 compression for low bandwidth and excellent HD quality.

3. Full HD 1080P@60fps encoding, hingga 4K@30fps HDMI output (via expansion board).

4. Pelabuhan USB — Supports one USB camera or Wi-Fi/4G module expansion.

5. Interkom Audio Dua Arah — Built-in G.711/AAC audio codec for full-duplex communication.

6. Dukungan Multi-Protokol — RTSP, ONVIF, GB28181, P2P, HTTP, RTMP, TCP/IP, DHCP.

7. AI and OSD Customization — Supports NPU-based AI algorithm integration and OSD overlay.

8. Catu Daya Fleksibel — DC 6–12V or PoE input supported.

9. Open Player SDK — Enables easy integration with custom platforms for secondary development.

10. Ukuran Kompak — Only 38×38mm, with anti-static and surge protection design.

---

Spesifikasi

Recommended Player

---

Aplikasi

• UAV / Drone – Real-time aerial video streaming and monitoring.

• Industrial Robots – Vision-based positioning, inspeksi, and automation control.

• Unmanned Vehicles (UGV/USV) – Network video transmission for navigation and remote operation.

• Network Video Conferencing Systems – Converts standard USB webcams into IP cameras.

• Microscopy / Electronic Magnifiers – High-definition visual output for laboratory and educational use.

• AI Vision Projects–Supports algorithm customization for smart recognition and analytics.

---

FAQ

Q: What is the default IP configuration for the device?
SEBUAH: The device’s default IP address is 192.168.1.188. If the IP address has been changed and is unknown, you can still locate the device on the network:

1. Connect the device (papan encoder) to your computer using an Ethernet cable.
2. Use the utility tool IPCSearchTool to scan the network. Pencarian IP-EN-V1.0.61 Unduh
3. The tool will detect the device and display its current IP address.
4. Enter the detected IP address into a web browser.
5. You will then be able to access the device’s configuration interface and live video preview page.

This method allows you to regain access even if the network settings have been modified.

Q: What user ID and password are needed to log in to the web interface?
SEBUAH: The default login credentials for the device web interface are: Nama belakang: admin Kata sandi: admin .

Q: We are interested in the Player SDK. Can we receive and display the video stream in our own software?
SEBUAH: iya nih. We can provide the PC Player SDK source code, which enables customers to receive and display video streams in their own software applications and perform custom integration or secondary development as needed.

Tautan Unduh: PC Player SDK Source Code

Please note that the SDK is provided for independent development purposes only. We do not provide technical support, customization services, or engineering assistance for secondary development based on the SDK source code.

Q1: What type of USB cameras can be used?
A1: Ini mendukung Kamera USB yang sesuai dengan UVC, including visible light and thermal imaging models.This device is designed to convert USB camera signals into IP streams.

Q2: Does it support Wi-Fi or 4G connectivity?
A2: iya nih, one of the USB ports can be used for a Wi-Fi or 4G expansion module (extra cost).

Q3: Can it be used for AI image processing?
A3: iya nih, the module integrates an NPU (0.5 ATAS) that supports AI algorithm customization.

Q4: Is SDK provided for software integration?
A4: iya nih, we provide an open player SDK untuk komputer, seluler, dan sistem tertanam.

P5: Can this module output HDMI video simultaneously?
A5: iya nih, itu mendukung HDMI 1080P60 output via an additional interface board.

Q6: Opsi daya apa yang tersedia?
A6: Mendukung DC 6–12V input and Catu daya PoE for flexible deployment.

Q7. Can I connect a second USB camera via a USB hub or the USB0 port?
A7: TIDAK. The system currently supports only one USB camera input.
Even if you use a USB hub or attempt to connect through the USB0 port, the device cannot process or switch between two simultaneous USB camera inputs.

Q8. Does the system support dual-camera USB capture?
A8: TIDAK. Dual USB-camera input is not supported at this time. The system provides: One USB camera video input, and One network video stream output (aliran IP), Additional USB video channels are not available.

Q9. What can be connected to the half-flex (half-pitch) cable connectors?
A9: The half-flex cable connectors are designed for factory-defined internal interfaces only, seperti: Internal debugging ports, Extension modules,Specific hardware functions reserved for system integration. These connectors are not intended for externally connecting additional USB cameras or third-party devices.

Q10. Can I enable multi-camera support through firmware updates or custom settings?
A10: Saat ini, multi-USB-camera support is not available and cannot be enabled through firmware. The hardware architecture is designed for single-camera USB input.

Q11: What is the purpose of the battery on the encoder board?
A11: The battery powers the on-board RTC (Real-Time Clock). The RTC keeps track of the system date and time even when the device is powered off, ensuring accurate timekeeping for functions such as timestamping recorded video or scheduling tasks.

Q12: What is the resolution of the analog video output?
A12: This USB-to-CVBS/video streaming encoder board outputs analog video with the following resolutions:

• SAHABAT: 720 × 576 piksel

• NTSC: 720 × 480 piksel

Q13: Does the board provide both analog and IP outputs simultaneously? How is it determined which output is used?
A13: iya nih, this USB UVC camera video encoder board supports simultaneous CVBS (analog) and IP/Ethernet video output. Both outputs can work at the same time, allowing you to monitor video via analog displays while streaming over the network. There is no need to switch between outputs; the board automatically provides both.

Q14: We want a working temperature range of -30°C to +50°C. Is this possible?
A14: iya nih, we have conducted dedicated testing, and the board has been verified to start up and operate normally at -30°C and continue functioning correctly at +50°C.

---

Posting Relatif

1. How to set UVC USB to IP Encoder for YouTube Live Stream?