Sommario
price list for power amplifier PA
| Amplificatore di potenza | Misurare | Gamma di frequenza | Bandwidth Range | Max power consumption | Costo unitario Dollaro statunitense |
| 1W | 43*26*12mm | 200-940MHz | 30-40MHz | 0.8A @ 12V | 130 |
| 1W | 43*26*12mm | 1000-2700MHz | 30-40MHz | 0.8A @ 12V | 156 |
| 2W | 43*26*12mm | 200-940MHz | 30-40MHz | 1.2A @ 12V | 156 |
| 2W | 81*48*14mm | 200-940MHz | 30-40MHz | 1.2A @ 12V | 156 |
| 5W | 94*58*14mm | 200-2700MHz | 30-40MHz | 2.3A @ 12V | 251 |
| 10W | 105*60*15mm | 200-2700MHz | 30-40MHz | 4.5A @ 12V | 336 |
| 20W | 105*60*15mm | 200-2700MHz | 30-40MHz | 2.8A @ 28V | 398 |
| 20W | 178*91*20mm | 300-2700MHz | 30-40MHz | 2.8A @ 28V | 398 |
| 30W | 178*91*20mm | 300-2700MHz | 30-40MHz | 3.8A @ 28V | 662 |
| 40W | 180*120*25mm | 300-2700MHz | 30-40MHz | 5.6A @ 28V | 852 |
| 50W | 180*120*25mm | 300-2700MHz | 30-40MHz | 7A @ 28V | 1042 |
| 80W | 248*185*30mm | 300-2700MHz | 30-40MHz | 12A @ 28V | 1327 |
| 100W | 248*185*30mm | 300-2700MHz | 30-40MHz | 15A @ 28V | 1589 |
We also can customize power amplifiers according to your other frequency ranges and dimension sizes.
What you should tell us about customization
Our engineers want to know details about the COFDM power amplifier, please tell us the gain, operating Voltage, larghezza di banda di frequenza, tipo di connettore, and input level.
Output power and dBm parameters
Di seguito vengono riportate alcune corrispondenze tra la potenza in uscita ed i parametri dBm visualizzati dallo strumento.
20mW è 13 dBm
200mW è 23 dBm
500mW is 27dBm
1 I watt sono 30 dBm
2 I watt sono 33 dBm
3 Watts is 35dBm
5 I watt sono 37 dBm
10 I watt sono 40 dBm
20 I watt sono 43 dBm
25 Watts is 44dBm
30 Watts is 45dBm
50 I watt sono 47 dBm
100 I watt sono 50 dBm
Power Amplifier and Transmission Range Distance
Ecco un modulo per COFDM PA, LOS, and NLOS transmission distance for your reference.*
| PA | LOS | NLOS |
| 500mW | >10Km | <300M |
| 1W | >30Km | <500M |
| 5W | >60Km | <1500M |
| 20W | >120km | <3000M |
| 50W | >200Km | <5000M |
| 100W | >250Km | <10Km |
The wireless transmission distance depends on many factors, compreso:
- Frequency band and antenna characteristics – different frequencies and antenna designs affect range.
- Transmitter power and receiver sensitivity – higher power and better receiver sensitivity increase distance.
- Height difference between transmitter and receiver – for example, from a UAV to the ground.
- Obstacles in the signal path – buildings, alberi, terreno, and other obstructions can reduce range.
- Atmospheric conditions – rain, nebbia, and humidity can affect signal propagation.
- Interference from other RF sources – nearby transmissions can degrade performance.
- Modulation and encoding type – e.g., COFDM, H.265, which impact signal robustness.
Power Amplifier Specification Download
PA 2~3W (160~900Mhz Power Amplifier)
PA 5W (160~900Mhz Power Amplifier)
PA 10W (160~900Mhz Power Amplifier)
Nota:
If the PA is over 20 watt, the antenna feeder cable should be better, Per esempio, utilizzare un -3 semi-flexible cable to connect the feeder to 3 metri.
Personalizzato
| Items | Prezzo | Descrizione |
| TTRM1210 | $889.00 | The TTRM1210-D01 BDA module has been engineered to support any signal type, from simple CW/FM signals Frequency Low: 30Mhz Frequency High: 2700Mhz Tx Gain: 36dB Tensione di alimentazione:12-30Vdc Rx Noise Figure: 2dB Rx Gain: 23dB Frequenza di uscita: 30MHz Frequenza di uscita: 2700MHz Psat (Tip): 39 Misurare (In): 3.25 x 2.42 x 0.54 |