Spis treści
price list for power amplifier PA
| Wzmacniacz mocy | Rozmiar | Zakres częstotliwości | Bandwidth Range | Max power consumption | Unit Cost USD |
| 1W | 43*26*12mm | 200-940MHz | 30-40MHz | 0.8A @ 12 V | 130 |
| 1W | 43*26*12mm | 1000-2700MHz | 30-40MHz | 0.8A @ 12 V | 156 |
| 2W | 43*26*12mm | 200-940MHz | 30-40MHz | 1.2A @ 12 V | 156 |
| 2W | 81*48*14mm | 200-940MHz | 30-40MHz | 1.2A @ 12 V | 156 |
| 5W | 94*58*14mm | 200-2700MHz | 30-40MHz | 2.3A @ 12 V | 251 |
| 10W | 105*60*15mm | 200-2700MHz | 30-40MHz | 4.5A @ 12 V | 336 |
| 20W | 105*60*15mm | 200-2700MHz | 30-40MHz | 2.8A @ 28V | 398 |
| 20W | 178*91*20mm | 300-2700MHz | 30-40MHz | 2.8A @ 28V | 398 |
| 30W | 178*91*20mm | 300-2700MHz | 30-40MHz | 3.8A @ 28V | 662 |
| 40W | 180*120*25mm | 300-2700MHz | 30-40MHz | 5.6A @ 28V | 852 |
| 50W | 180*120*25mm | 300-2700MHz | 30-40MHz | 7A @ 28V | 1042 |
| 80W | 248*185*30mm | 300-2700MHz | 30-40MHz | 12A @ 28V | 1327 |
| 100W | 248*185*30mm | 300-2700MHz | 30-40MHz | 15A @ 28V | 1589 |
We also can customize power amplifiers according to your other frequency ranges and dimension sizes.
What you should tell us about customization
Our engineers want to know details about the COFDM power amplifier, please tell us the gain, operating Voltage, szerokość pasma częstotliwości, typ złącza, and input level.
Output power and dBm parameters
Oto niektóre zależności między mocą wyjściową a parametrami dBm wyświetlanymi przez przyrząd.
20mW wynosi 13 dBm
200mW wynosi 23 dBm
500mW is 27dBm
1 Waty to 30 dBm
2 Waty wynoszą 33 dBm
3 Watts is 35dBm
5 Waty wynoszą 37 dBm
10 Waty to 40 dBm
20 Waty wynoszą 43 dBm
25 Watts is 44dBm
30 Watts is 45dBm
50 Waty wynoszą 47 dBm
100 Waty to 50 dBm
Power Amplifier and Transmission Range Distance
Here is a form for COFDM PA, LOS, and NLOS transmission distance for your reference.*
| ROCZNIE | LOS | NLOS |
| 500mW | >10km | <300M |
| 1W | >30km | <500M |
| 5W | >60km | <1500M |
| 20W | >120km | <3000M |
| 50W | >200km | <5000M |
| 100W | >250km | <10km |
The wireless transmission distance depends on many factors, w tym:
- Frequency band and antenna characteristics – different frequencies and antenna designs affect range.
- Transmitter power and receiver sensitivity – higher power and better receiver sensitivity increase distance.
- Height difference between transmitter and receiver – for example, from a UAV to the ground.
- Obstacles in the signal path – buildings, drzewa, teren, and other obstructions can reduce range.
- Atmospheric conditions – rain, mgła, and humidity can affect signal propagation.
- Interference from other RF sources – nearby transmissions can degrade performance.
- Modulation and encoding type – e.g., COFDM, H.265, which impact signal robustness.
Power Amplifier Specification Download
PA 2~3W (160~900Mhz Power Amplifier)
PA 5W (160~900Mhz Power Amplifier)
PA 10W (160~900Mhz Power Amplifier)
Notatka:
If the PA is over 20 waty, the antenna feeder cable should be better, Na przykład, użyj A -3 semi-flexible cable to connect the feeder to 3 metrów.
Dostosowane
| Rzeczy | Cena | Opis |
| TTRM1210 | $889.00 | The TTRM1210-D01 BDA module has been engineered to support any signal type, from simple CW/FM signals Frequency Low: 30Mhz Frequency High: 2700Mhz Tx Gain: 36dB Napięcie zasilania:12-30Vdc Rx Noise Figure: 2dB Rx Gain: 23dB Częstotliwość wyjściowa: 30MHz Częstotliwość wyjściowa: 2700MHz Psat (Typ): 39 Rozmiar (W): 3.25 X 2.42 X 0.54 |