यूएवी रिकवरी आरएफ बीकन ट्रैकर (गैर-जीएसएम / गैर सैटेलाइट, विरोधी हस्तक्षेप डिजाइन)
विषयसूची
विवरण
The UAV Recovery RF Beacon Tracker is a specialized tracking solution designed for drone operations in remote and challenging environments where GSM and internet connectivity are unavailable.
Unlike conventional GPS or satellite trackers, this device utilizes a low-power RF beacon technology to ensure zero interference with UAV navigation systems.
In the event of a crash, the tracker automatically activates and transmits a recoverable radio signal, enabling rapid location of the UAV even in dense vegetation or water environments.
सिंहावलोकन
This tracker is purpose-built for UAV recovery in forestry, खनन, and off-grid operations.
Traditional satellite trackers often transmit high-power signals that may interfere with onboard GNSS systems, leading to flight instability or unintended failsafe triggers.
To address this issue, the UAV Recovery RF Beacon Tracker adopts a passive-safe architecture during flight and activates only after a crash or power loss is detected.
By combining ultra-low power RF transmission with robust waterproof housing, the system ensures reliable post-crash recovery without compromising flight safety.
विशेषताएं
Zero GNSS Interference
- RF beacon operates on dedicated frequency bands
- No impact on UAV GPS or flight control systems
Crash-Activated Transmission
- Automatic activation via:
- Impact detection
- Power disconnection
- Ensures signal is only transmitted when needed
Long-Range RF Beacon Tracking
- Directional tracking using handheld receiver
- Typical range: 3–15 km (depending on terrain)
Ultra-Low Power Consumption
- Continuous transmission for several days after crash
- Optimized for long-duration recovery missions
जलरोधक & Rugged Design
- आईपी67 / IP68 protection level
- Operates in:
- Heavy rain
- Wetland
- Water immersion scenarios
लाइटवेट & सघन
- Designed specifically for UAV payload constraints
Optional Audible Buzzer
- Assists in close-range recovery in dense vegetation
विशेष विवरण
| Parameter | Specification |
|---|---|
| पोजिशनिंग | Optional GNSS (logging only, no transmission during flight) |
| संचार | RF Beacon (वीएचएफ / यूएचएफ / 433 मेगाहर्ट्ज वैकल्पिक) |
| ट्रांसमिशन पावर | Low-power (विन्यास) |
| Activation Mode | Crash / प्रभाव / Power loss |
| Tracking Range | 3–15 km (line-of-sight dependent) |
| बैटरी की आयु | 48–120 hours (post-activation) |
| वाटरप्रूफ रेटिंग | आईपी67 / आईपी68 |
| वजन | < 100 जी (अनुकूलन) |
| Operating Temperature | -20डिग्री सेल्सियस से +60 डिग्री सेल्सियस |
| बढ़ते | बाहरी / embedded UAV mount |
| वैकल्पिक सुविधाएँ | बजर, LED strobe, data logging |
अनुप्रयोगों
UAV Operations
- Forestry mapping
- Surveying & निरीक्षण
- BVLOS missions
- Agricultural drones
दूर & Harsh Environments
- Dense forest areas
- Mountain regions
- Wetlands and rivers
Industrial Use Cases
- Mining operations
- Pipeline inspection
- बुनियादी ढांचे की निगरानी
Recovery & Safety
- UAV crash recovery
- Equipment tracking in off-grid areas
iVcan.com –
We are currently exploring GPS tracker options to support our UAV operations.
As background, our operational areas are in remote forestry sites where internet connectivity is unavailable, and in many locations, there is also no GSM signal at all.
Based on our experience, when a UAV crashes, the unit often falls into dense vegetation, making it extremely difficult to locate and sometimes requiring several days of searching.
To enhance our recovery capability, we are seeking your recommendation on a tracker model that is suitable for these challenging conditions.
Previously, we tested several satellite-based GPS trackers that transmit location data every 30 मिनट.
तथापि, during UAV operations, these devices caused communication interference with the drone’s GPS system, which repeatedly triggered the failsafe Return-to-Home function.
Considering these challenges, we would appreciate your advice on the most appropriate and reliable tracker solution for UAV operations in remote, non-GSM, and non-internet environments.
Ideally, the tracker should also be waterproof so that, in case the UAV falls into water, the unit can still be located.