COFDM Modulator-Demodulator Module 2X video Encoder-Decoder Board hdmi cvbs low latency

Modulator Demodulator Module Encoder Decoder HDMI CVBS AV Input AES 256 FHD RF streaming COFDM

drone uav low latency COFDM Modulator-Demodulator Module Encoder-Decoder Board hdmi cvbs

Módulo modulador-demodulador COFDM 2X placa codificadora-decodificadora de vídeo hdmi cvbs baixa latencia

Modulator Demodulator Module Encoder Decoder HDMI CVBS AV Input AES 256 FHD RF streaming COFDM

drone uav low latency COFDM Modulator-Demodulator Module Encoder-Decoder Board hdmi cvbs

Modulador COFDM Módulo demodulador Codificador Decodificador HDMI CVBS Entrada AV AES 256 Transmisión de RF FHD

SKU: Vcan1776 categorías: COFDM, Módulo TX RX, Unidireccional unidireccional etiquetas: COFDM, cofdm demodulator, Unha dirección

Modulador COFDM Módulo demodulador Codificador Decodificador HDMI CVBS Entrada AV AES 256 Transmisión de RF FHD

COFDM Modulator-Demodulator Module 2X video Encoder-Decoder Board hdmi cvbs low latency — COFDM Modulator-Demodulator Module 2X video Encoder-Decoder Board hdmi CVBS low latency

Táboa de contidos

Another side view

drone uav low latency COFDM Modulator-Demodulator Module Encoder-Decoder Board hdmi cvbs — drone uav low latency COFDM Modulator-Demodulator Module Encoder-Decoder Board hdmi CVBS

Modulator Demodulator Module Encoder Decoder HDMI CVBS AV Input AES 256 FHD RF streaming parameter configuration board — COFDM Modulator Demodulator HDMI CVBS Module Encoder Decoder HDMI CVBS AV Input AES 256 FHD RF streaming parameter configuration board

COFDM Encoder module, CVBS / entrada HDMI, Saída IP

Composite CVBS input IP RJ45 Ethernet output Ultra-low latency encoder board, HDMI CVBS Encoder — Entrada CVBS composta IP RJ45 Saída Ethernet Placa codificadora de latencia ultra baixa, Codificador HDMI CVBS

For More details about the COFDM encoder board, please visit here

COFDM Encoder module Advantage:

Codificación de audio e vídeo H.265/H.264 de latencia ultra baixa compatibilidade máxima con captura e codificación de vídeo 1080P@60 en tempo real
Entrada de audio e vídeo HDMI ou AV, despois da codificación, a saída do porto Ethernet ou a saída ao módulo sen fíos, A taxa de bits de codificación de vídeo pódese configurar de forma dinámica
Apoiar a entrada e saída de audio desencriptación audio
Admite dous vídeos (HDMI + AV) codificación de entrada simultánea (opción, o valor predeterminado é a codificación HDMI ou AV, escolle unha das dúas fontes de entrada). )
IU web ou serial port UART AT command for configuration management

HDMI CVBS composite SDI video input encoder board digital IP ethernet output H264 H265 module board

COFDM transmitter module

COFDM Wireless video transmitter module RCB board

Change RF connector from IPEX to MMCX for COFDM wireless video transmitter encoder modulator board

COFDM modulator-demodulator datasheet download

COFDM demodulator Vcan1776RX-H264 datasheet

Encoder Modulator Decoder Demodulator Module — COFDM-RF-demodulador-decodificador-receptor-H264-Vcan1776RX-H264

The last version of the TX RX board

TX: V6.5.6p

RX: 4.1.2p

Preguntas frecuentes

1. What should I do when I found one Tx module doesn't generate RF output power?

COFDM-Transmitter-Module

Question1: Could you please tell me part number of this component, we try to find localy and check. resposta 1: It is a inductance named LOH32PN2R2NNC.

COFDM-Transmitter-Module-no-tx output power

Suggest Check Points: If the power supply current of the board is well but there is no RF output, maybe the below component TC1-1-13MX+ is generally damaged.
In order to avoid damage to this device during transportation (the device itself is relatively high), we ordered red glue protection for this device when we shipped it.

COFDM Video Data Transmitter module

The engineer also suggests that you check to see if the cable is loose or in poor contact.
Please try to replace the FPC cable connecting the two boards
We can provide spare parts if you're sure which one.

2. Can you offer me the UART AT command file for this model?

Claro

Consulte a seguinte ligazón.

Encoder Modulator Decoder Demodulator Module Parameter Configuration Instructions COFDM AT Command

3. How does this COFDM Video transmitter and receiver support an IP camera?

1. It is not easy to connect to IPC for a one-way COFDM link. We have an H264 model, which is connected to IPC input by expanding the network port, but there are requirements for IPC models (not all models of IPC can be well connected with COFDM links), we have tested the IPCs of Hikvision, Dahua, and Xiongmai, and found that the connection effect of Hikvision is quite ideal.

2. It is impossible to directly remove the HDMI CVBS encoder and connect the IP Camera to the COFDM Transmitter board. One-way COFDM connection to IPC requires special technical methods to realize.

3. The best way is to recommend using our two-way image transmission transceiver, which directly supports the IP camera.

4. If the customer must use the COFDM transmitter board to support the IP camera, there are two points to pay attention to.

5. The first point is a technical problem. We need to use an alternative method to allow unidirectional COFDM links to be used with IPC.

6.If you consider IPC from the perspective of cost reduction, you don't need to consider it. Because the encoding board and decoding board are still necessary, the cost cannot be saved.

7. The second point is the customer's usage habit, which is no longer the traditional two-way link method. They can view the IP Camera Video and even control the PTZ of the IP Camera via the web page or PC-side PC software (Comandos UART AT).

8. Because of this model wireless link is a COFDM one-way link; there is no reverse data (only one-way transmission; data cannot be transmitted from the receiver to the transmitter); the customer can only watch the video of the IP Camera and cannot reversely configure the IP Camera's parameters or control the PTZ of the IPCamera.

9. This is a problem that many customers overlooked at first and later complained about after using it.

10. So we don't recommend that the client choose a one-way COFDM transmitter and receiver for the IP camera. We have a better solution for the IP Camera via two video link transceivers.

4. Could you please give me the Required C/N (BER=2x10-4 after Viterbi) for different the bandwidths 2, 4, 6, e 8 Mhz of HDMI video link we use?

1. Agora mesmo, the receiver only provides two parameters of signal strength and bit error rate, and there is no C/N parameter

2. What parameters do you need to adjust according to different bandwidths? If it is a video code stream, the transmitter encoding board itself will automatically calculate the appropriate video stream code rate according to the currently used wireless parameters (ancho de banda, GI, CR, etc.), and the video code rate will be found after changing the bandwidth with the parameter board will automatically adapt.

cofdm video transmitter parameter configuare tool

3. Pregunta, If our camera quality is good enough for both 4 MHz e 8 ancho de banda MHz. Neste caso, Should the customer choose 4 ou MHz 8 MHz?

resposta: Our one-way COFDM shipments use 4Mz wireless bandwidth by default, corresponding to a video bit rate of 3.12Mbps, which is enough for 1080p; If changed to 8MHz wireless bandwidth under the same conditions, the video bit rate doubles to 6.24Mbps. All customers can choose between wireless bandwidth 4MHz and 8MHz, even 6MHz can also be considered.

4. Pregunta: Which is better for this tx+rx set from a receive sensitivity view?

resposta: For wireless links, it can be simply considered that the receiving sensitivity will be higher at lower wireless bandwidths. From the perspective of receiving sensitivity, 4MHz>6MHz>8MHz

5. What HDMI version is standard in Modulator input?

HDMI 1.4

6. Do you have any COFDM Relay Repeater Modules for the Wireless Video Transmitter and Receiver？

Claro

Consulte a seguinte ligazón

Módulo repetidor de relé COFDM para transmisor y receptor de vídeo inalámbrico UAV de dron Vcan1870

COFDM Relay repeater for wireless video transmitter and receiver — Repetidor de relé COFDM para transmisor e receptor de vídeo sen fíos

7. Could send me a data measurement of sensitivity for 4/6/8 MHz cases? Por exemplo, for QPSK, 1/2CR, 1/32GI what threshold reception RX's input level (dBm)?

Single channel receiving sensitivity:

-97+/-1dBm at QPSK 8MHz,

-98+/-1dBm at QPSK 6MHZ,
Sensitivity increased by 3dbm when receiving with dual antennas

8. Este módulo admite máis de 1.4G? por exemplo 2.4G, 3G, ou 3.6G?

si, apoiar.

Módulo transmisor modulador codificador de vídeo COFDM 3.5G e 4G resultado da proba.

9. Where can I download the UDP player? We recommend Splayer_v4.2_2020.6.6 which we use frequently.

The receiver default firmware supports RTSP player, some clients prefer UDP player, which we also can offer, then RTSP player doesn't support. （RTSP and UDP can only choose one of the two firmware）

Please download at the below link.

Splayer_v4.2_2020.6.6

https://drive.google.com/file/d/1ihzUhfnx2Wo3zLO8UAs1aUQeLswonJD-/view?usp=sharing

Splayer_v4.3_2022.10.22

https://drive.google.com/file/d/1PQc-LZ55qGnjeMsjkHYSloHfY3NEUsGH/view?usp=drive_link

UDP Player: Splayer setting for living stream

10. Can you offer a metal box to protect the COFDM receiver board?

Claro, consulte a imaxe de abaixo.

long range Wireless Video Transmitter and Receiver for Camera drone — Transmisor e receptor de vídeo sen fíos de longo alcance para drones con cámara

Aínda tes unha pregunta?

Póñase en contacto connosco para obter máis información.

Envía a túa pregunta

How to switch HDMI or CVBS video input via the UART AT command?

How to upgrade the COFDM video receiver

How to upgrade the COFDM drone video encoder modulator board

COFDM Wireless Video encoder modulator board delay low latency — COFDM Wireless Video encoder modulator board

comentarios

Non hai comentarios aínda.

Sexa o primeiro en opinar sobre "Modulador COFDM Módulo demodulador Codificador Decodificador HDMI CVBS Entrada AV AES 256 Transmisión de RF FHD” cancelar resposta