SE10 Video Encoder Device

— Low latency H.265/H.264 video encoder device, full HD resolution, maximum 1080P60 encoding
— Audio codec with audio input and output
— Mini HDMI/SDI/AHD/AV video input, Ethernet RTSP/TS stream output, TCP/UDP protocol
— Web UI for management
— Facultatif: HDMI+AV or SDI+AHD input and encoding at the same time
— Facultatif: 4K video input and 4K encoder, maximum resolution 3840*2160@30fps
— When paired with the SHD5 decoder module, the H.265 video latency is about 200ms to 250ms
— When paired with the SHD4 decoder module and in the lowest H.264 mode, the video latency is about 50ms to 130ms

SE10 video encoder device implements H.265/H.264 video encoding and audio codec, the stream will output via Ethernet after encoding. One channel uart data can also be packed with the stream and output to the Ethernet. The video encoding bitrates are controlled via web UI. The SE10 device is in compact size and suitable for real-time live video monitor via wireless link or Ethernet. We have two models:
    * SE10-HDMI, Mini HDMI/AV video input
    * SE10-SDI, SDI/AHD video input

Video and audio input of SE10-HDMI:

Mini HDMI connector for HD video input, 4PIN ZH1.5mm connector for AV input. SE10-HDMI supports one-channel video input and encoding with default firmware. The system will auto-detect the input video after the system’s start-up. When HDMI video and AV video are connected in, the HDMI input or the specified input (via Web UI) is a priority. SE10-HDMI can also support both HDMI input and AV input and encode two-channel videos at the same time with specified firmware.

• Support HDMI video input formats: 1080@60P, 1080@50P, 1080@30P, 1080@25P, 1080@24P, 1080@60I, 1080@50I, 1080@30I, 720@60P, 720@50P, 720@30P, ……
• Support AV video input formats: 720*480 60je(NTSC), 720*576 50je(COPAIN)
• encodage vidéo: H.265/H.264, setup via Web UI
• Video encoding bitrates adjustable via Web UI
• Supports proprietary H.264 video compression only using p-frames for the lowest latency(the encoding and decoding latency is about 50ms to 130ms when working with the SHD4 decoder module).
• When paired with the SHD5 decoder module, the H.265 encoding/decoding video latency is about 200ms to 250ms.
• Entrée audio: embedded HDMI or analog audio
• Audio coding: CAA, 16peu, stéréo, 32Kbit/s

4K hardware version of SE10-HDMI is also available, this version supports 4K video input and encoding, the maximum input is 3840*2160@30fps.

Video and audio input of SE10-SDI:

SMA female connector for SDI HD video input, 4PIN ZH1.5mm connector for AHD input. The AHD input is AV-compatible. SE10-SDI supports one-channel video input and encoding with default firmware. The system will auto-detect the input video after the system start-up. When SDI video and AHD video are connected in, the SDI input or the specified input (via Web UI) is a priority. SE10-SDI can also support both SDI input and AHD input and encode two-channel videos at the same time with specified firmware.

• Support SDI video input formats: 1080@60P, 1080@50P, 1080@30P, 1080@25P, 1080@24P, 1080@60I, 1080@50I, 1080@30I, 720@60P, 720@50P, 720@30P, ……
• Support AHD video input formats: 1080P30, 1080P25, ……
• Support AV video input formats: 720*480 60je(NTSC), 720*576 50je(COPAIN)
• encodage vidéo: H.265/H.264, setup via Web UI
• Video encoding bitrates adjustable via Web UI
• Supports proprietary H.264 video compression only using p-frames for the lowest latency(the encoding and decoding latency is about 80ms to 150ms when working with the SHD4 decoder module).
• When paired with the SHD5 decoder module, the H.265 encoding/decoding video latency is about 200ms to 250ms.
• Entrée audio: embedded SDI or analog audio
• Audio coding: CAA, 16peu, stéréo, 32Kbit/s

I/O signals

Données uart

3Connecteur PIN ZH1,5 mm, RS232 by default (can be modified to TTL3.3V before ship out). This uart data will be packed with the video stream and output to the Ethernet. When the SE10 module works paired with the decoder module (SHD5, SHD4, SHD3, SHD1, etc.) and Ethernet linker (wireless or wire), the data to this uart will be transferred to the data uart of the decoder module.

SPK interface

2Connecteur PIN ZH1,5 mm. When SE10 is paired with a video decoder module, the SE10 system is capable to decode the audio stream from the video decoder module which is received via an Ethernet port with a wire or wireless connection, and the audio will output to a speaker. This interface is used for connecting the speaker. It can drive a 1W speaker directly.

Ethernet interface

4Connecteur PIN ZH1,5 mm, RTSP/TS stream output, TCP/UDP protocol, setup by Web UI.

Alimentation

Connecteur XT30PW-M
Plage d'entrée: 7~24 V CC
Consommation d'énergie: <220mA@12V

Caractéristiques physiques

Dimensions: 72.5*48*15.4mm (not including connectors out of the case)
Poids: 53g