Encodeur CVBS vers IP et module décodeur IP vers CVBS pour relais vidéo FPV
Système de transmission vidéo analogique-IP FPV pour la surveillance à distance via le câble Ethernet
Real-time FPV video relay via CVBS to IP encoder and IP to CVBS decoder modules
Long-Range FPV Streaming Solution with CVBS-to-IP and IP-to-CVBS Conversion
FPV Receiver + IP Encoder/Decoder for Network-Based Video Relay
Stream FPV Video Anywhere—From Analog to IP in Seconds.
Real-time FPV Monitoring Over LAN, 4G, or Wi-Fi Networks.
Bridge the Gap: Convert CVBS to IP and Back to HDMI.
Remote FPV Access Made Easy—Plug, Encoder, Transmettre, Voir.
Deploy FPV Video Over Any Network—No Distance Limits.
Low-Latency IP Streaming for UAVs, à l'UGV, and Remote Cameras.
From Field to Control Room—Seamless FPV Video Relay.
Modular FPV Transmission System for Any Deployment Scenario.
Reliable analog-to-IP conversion for mission-critical video.
Your FPV Signal, Anywhere—Encoded, Streamed, and Displayed.
Table des matières
Aperçu
This modular system enables real-time transmission of analog FPV (Vue à la première personne) video over IP networks, allowing remote monitoring, contrôle, and display of UAV/UGV video feeds. Designed for flexibility and reliability, it converts CVBS or HDMI signals into IP streams via an encoder, transmits them over LAN/4G/Wi-Fi, and decodes them back to HDMI or CVBS for display. Ideal for long-range deployments, mobile operations, et applications critiques.
Caractéristiques
- Converts analog FPV video to IP stream (H.264/H.265)
- Prend en charge RTSP, RTMP, SRT protocols for flexible streaming
- Compatible with LAN, Wi-Fi, and 4G cellular networks
- Real-time decoding to HDMI or CVBS for local display
- Low-latency transmission (<300ms de bout en bout)
- Modular design for easy integration and customization
- Supports remote deployment and multi-client access
- Optional serial-over-IP for remote FPV receiver control
Specifications
| Paramètre | Valeur / La description |
|---|---|
| Video Input | CVBS (PAL/NTSC), HDMI |
| Format d'encodage | H.264 / H.265 |
| Protocoles de diffusion en continu | RTSP, RTMP, SRT, HTTP |
| Interfaces réseau | Ethernet (RJ45), Wi-Fi, 4G (via router) |
| Decoding Output | HDMI (1080p), CVBS |
| Latency (End-to-End) | 150ms – 300ms |
| Alimentation | DC 5V–12V |
| Operating Temperature | -10°C to +50°C |
| Interface de contrôle | Optional UART/RS232 over IP |
Application
- UAV/UGV Remote Monitoring Transmit FPV video from drones or ground vehicles to control centers.
- Inspection industrielle Real-time video relay from hazardous or inaccessible environments.
- Sécurité publique & Intervention d'urgence Deployable video feeds for search & sauvetage, application de la loi, and disaster zones.
- Diffusion en direct & Event Coverage Stream analog camera feeds to remote production teams or online platforms.
- Surveillance de sécurité Extend legacy analog systems into IP-based remote viewing networks.
Detailed Explanation of System Architecture
[FPV Receiver] → [IP Encoder] → 🌐 Network (LAN/4G/Wi-Fi) → [IP Decoder] → [HDMI/CVBS Display]1. FPV Receiver (Analog Video Receiver), not including
- Fonction: Receives analog video signals from UAVs or remote-controlled vehicles, typically via 5.8GHz RF transmission.
- Format de sortie: CVBS (PAL/NTSC); some models may support HDMI.
- Deployment Notes:
- Diversity receivers (dual antennas) are recommended for improved signal stability.
- Can be deployed as a relay node in elevated or fringe areas to extend coverage.
- Supports frequency switching and gain adjustment; remote control interface is recommended for advanced setups.
2. IP Encoder (Analog-to-IP Video Converter) , Vcan2090s
- Fonction: Converts analog video (CVBS or HDMI) into a digital IP stream using H.264 or H.265 compression.
- Interfaces d'entrée: CVBS (via BNC or AV jack), HDMI (facultatif).
- Protocoles de diffusion en continu: RTSP, RTMP, SRT, HTTP.
- Key Parameters:
- Encoding format: H.264/H.265 (sélectionnable)
- Résolutions prises en charge: 720×576 (SD) to 1920×1080 (HD)
- Latency: Recommandé <150ms for real-time transmission
- Deployment Notes:
- Configure static IP or enable DHCP.
- Stream URL must match decoder or server settings.
- Recommended modules: HiSilicon Hi3516, embedded encoder boards, or USB capture + software encoder (par ex., OBS, VLC).
3. Réseau (Réseau local / 4G / Wi-Fi) , not including or choose our Vcan2090s-4G-Wi-Fi
- Fonction: Transports the IP video stream from encoder to decoder.
- Possibilités:
- Réseau local: Ideal for local setups; stable and low latency.
- Wi-Fi: Suitable for short-range wireless deployment; prone to interference.
- 4G/5G: Enables remote access; requires public IP or VPN tunneling.
- Deployment Notes:
- Use 4G routers with public IP or virtual networking tools like ZeroTier.
- Recommended bandwidth: ≥2 Mbps for SD, ≥5 Mbps for HD.
- Implement QoS policies to prioritize video traffic.
4. IP Decoder (IP-to-Video Output Converter) Vcan2014
- Fonction: Receives the IP video stream and decodes it into HDMI or CVBS output for display.
- Input Protocols: RTSP, SRT, HTTP, UDP.
- Interfaces de sortie: HDMI (for HD display), CVBS (for legacy monitors).
- Key Parameters:
- Decoding format: H.264/H.265
- Resolution support: Must match encoder settings
- Buffering: Supports adaptive buffering and jitter correction
- Deployment Notes:
- Configure stream input (par ex.,
rtsp://xxx.xxx.xxx.xxx/live) - Recommended devices: Kiloview D series, Teradek Cube, or Raspberry Pi with ffmpeg/gstreamer.
- Supports multi-stream decoding and optional OSD overlay.
- Configure stream input (par ex.,
5. HDMI/CVBS Display (Video Output Device), not including
- Fonction: Displays the decoded FPV video in real time.
- Interface Types:
- HDMI: For modern HD monitors, TVs, or FPV terminals.
- CVBS: For analog monitors or legacy display systems.
- Deployment Notes:
- Ensure compatibility with decoder output resolution and format.
- Optional features: enregistrement, screenshot capture, Superposition OSD.
FAQ
Q1: What are the main differences between AHD‑IPM‑V10 and AHD‑IPM‑V20?
A1: Please refer to the image for a visual comparison. The key improvements in the AHD‑IPM‑V20 are:
-
Reduced height network input transformer
-
Optimized layout for the video input interface
-
Optimized layout for the power input interface
T2: Which model is recommended for procurement?
A2: Engineers recommend prioritizing the AHD‑IPM‑V20. It is easier to install and adjust height, making it more suitable for FPV applications.
T3: What are the benefits of AHD‑IPM‑V20 over V10?
A3:
-
Lower network input transformer height allows better mechanical compatibility.
-
Optimized video input placement improves installation convenience.
-
Power input interface is closer to the power circuit, reducing the chance of power noise interfering with the video signal.
T4: Why should I choose AHD‑IPM‑V20 for FPV applications?
A4: Its improved layout and lower-profile design make integration into FPV systems easier, safer, and more reliable, minimizing interference and simplifying assembly.
Cartes de modules d'encodeur
Cartes de modules de décodeur
Disponible pour la personnalisation
New Encoder Products
| Non. | Nom du produit | Configuration | Key Features | Statut |
|---|---|---|---|---|
| 1 | Encodeur vidéo à lumière visible USB UVC double canal | 2× Entrée USB | Prend en charge l'encodage vidéo de la double caméra USB, et streaming RTSP; local CVBS/HDMI output; modes d'affichage commutables | Mass Production |
| 2 | Encodeur double canal (1× Lumière visible USB + 1× Caméra d'imagerie thermique USB) | 2× Entrée USB | Prend en charge une double caméra USB (visible + thermique) capturer, codage, et streaming RTSP; local CVBS/HDMI output; modes d'affichage commutables | Mass Production |
| 3 | Module d'affichage HDMI/CVBS du décodeur RTSP | HDMI + CVBS output | Prend en charge le décodage de flux RTSP jusqu'à 4 × 1080P à 30 ips; Prise en charge du transfert de protocole de streaming vidéo; Affichage de la sortie HDMI/CVBS | Sample Available |
| 4 | Décodeur RTSP Module d'affichage HDMI/CVBS avec 4.3"/5" Écran LCD | Sortie HDMI + Écran LCD | Prend en charge le décodage de flux RTSP jusqu'à 4 × 1080P à 30 ips; protocol forwarding; Affichage de la sortie HDMI/CVBS | Débogage |
| 5 | Encodeur double canal (1× Lumière visible USB + 1× CVBS analogique) | 1× CVBS + 1× USB UVC input | Double vidéo (USB + CVBS), encodage et streaming RTSP; local CVBS/HDMI output; modes d'affichage commutables | Débogage |
| 6 | Encodeur double canal (1× USB-UVC + 1× AHD analogique) | 1× AHD + 1× USB UVC input | Double capture vidéo (USB + AHD), encodage et streaming RTSP; local CVBS/HDMI output; modes d'affichage commutables | Débogage |
| 7 | Encodeur double canal (1× CVBS + 1× Vidéo analogique AHD) | CVBS + AHD 2 entrée vidéo | Double capture vidéo analogique, encodage et streaming RTSP; local CVBS/HDMI output; modes d'affichage commutables | Débogage |
| 8 | Encodeur double canal (1× Caméra CMOS + 1× Caméra d'imagerie thermique USB) | 1×Interface USB | Prend en charge le CMOS + Capture par caméra thermique USB, encodage et streaming RTSP; local CVBS/HDMI output; modes d'affichage commutables | Mass Production |
Pour des solutions de conversion d'entrée/sortie vidéo personnalisées non répertoriées dans nos produits, veuillez nous contacter pour le support OEM/ODM. Nous pouvons développer des produits sur mesure en fonction de vos besoins.
iVcan.com –
We deployed the CVBS-to-IP and IP-to-CVBS FPV video relay system for our UAV operations, and it exceeded expectations. The system reliably converts analog FPV video into IP streams and back with minimal latency (<300MS), enabling real-time monitoring over LAN, 4G, or Wi-Fi. The modular encoder and decoder design made integration straightforward, and multi-protocol support (RTSP, RTMP, SRT) ensures compatibility with various network setups. Both HDMI and CVBS outputs provide flexible display options, making this solution ideal for remote monitoring, inspection industrielle, and mission-critical FPV applications. The video quality is clear, écurie, and perfectly suited for professional deployments.