Question 1

1. Can you show me this two-way data video link module real product video?

Accepted Answer

Yes, please check the blow video link at the youtube.

Video at Youtube

Question 2

2. Does this model support IP mesh? Is your full duplex link module support for signal relay?

Accepted Answer

This model support customizing the IP mesh function. There are three versions: 3km, 10km, and 50km according to build different the power amplifier.

IP mesh wireless video data audio link module TDD transceiver wireless video transmitter

Normal default full duplex link module support relay, you should buy at least three or more units. One unit is the transmitter, one unit as the receiver, and the other unit can put the middle between the transmitter and receiver as the relay/repeater/extender.

Question 3

3. Can you tell me how to connect your two-way data video link to the RF power amplifier?

Accepted Answer

The maximum RF transmission power of this two-way data video link module is 25±2 dBm, We also provides power amplifier to increase the RF Power to 2W/5W/10W. Below diagram shows how to add power amplifier outside of two-way digital data video link module.

Where is the IIC_SCL pin on the module?

Ethernet Radio Transceiver module with power control for external PA

Question 4

4. Can you show me what complete products by this wireless video data link module?

Accepted Answer

Yes, Please check the below link product, which is used the wireless video data audio two-way link module to assemble, just plus the Power ampleifier and encloser and accessory.

TX900

15km 30km 80km 150km long-distance wireless video transmitter receiver transmission transceiver PA 2W 5W 10W

15-150km long-range wireless video transmitter and receiver for drone camera

Question 5

5. Can we monitor the module temperature By using web UI?

Accepted Answer

There was no function to query the temperature of the module.

Question 6

6. Can you sell the Morningcore module CX6600 to me? I want to assemble them by myself.

Accepted Answer

Sure. It is ok.
The Moningcore CX6600 (L1860C_P2P) is only an electronics module, you need to develop a peripheral circuit to support it, like power and ethernet and data Input Outport. And you also need to hire a software engineer to develop the firmware and UI for you.
As a trial sample, it is better that you can buy our complete products to test. After you test and use them, the quality is satisfied, then try to buy the module or parts to develop it by yourself. You can copy our design and improve it to be an excellent product.
After all, this is a radio transmission product, and any improper operation may interfere with the signal, resulting in shorter transmission distances.

Question 7

7. Regarding frequency- for testing, we will use 2.4 GHz. However, can we switch frequency bands to 1.4G or 800Mhz later if we change antennas to the right ones? As far as I understand this unit does not have PA.

Accepted Answer

Sure. support.
There is no optional frequency band of 2.4G modification on the web page, you need to send AT commands to modify or enter the Morningcore web page to modify.

Question 8

8. Do you have the exact dimension size? Special the fixing hole size by screw.

Accepted Answer

Question: Any recommendations on the PA + link module enclosure? Need an RF cavity filter? minimal box with cooling for the RF transistor?

Answer: The PA enclosure is CNC according to your design and construction. We used the electronic cooling fan. The encloser is a special CNC produced according to the UAV video data link module + Power Amplifier + cooling fan.

Please check the below picture. Our completed product, TX900, has only a link module + Power Amplifier and cooling fan.

https://i0.wp.com/ivcan.com/wp-content/uploads/2019/09/TDD-Transceiver-Model-T30P-2-watts-PA-power-amplifier.webp

Question 9

9. If I buy just a trial sample without the PA board what range will I get and is it possible to add PA later?

Accepted Answer

What range of the trail sample do you need?
We can offer you a 1~150 km range of the link module. You can add the PA later if you want. Min 15km and max 150km module cost is different.
The module can transfer the signal over 150km with the 10-watt PA to increase the signal. Without the PA, the transmission range is almost 10~15km.
If you buy one 15km range module, even you plus the PA, the range is almost 15~17 km range. The signal strength and ability of the anti-interference will increase much.

Question 10

10. How much current(amps )does the module draw?

Accepted Answer

The Power consumption is about 4W.
Current equals power consumption divided by supply voltage
4 / 12=0.33A, if you’re on a 12-volt supply.

Question 11

11. I need the 150 km transmission range wireless video data module, What frequency range is better?

Accepted Answer

There are two versions on the different frequency range.
1st version’s frequency range is from 1420 Mhz to 1530 Mhz, with 110Mhz frequency width for FHSS.
2nd version’s frequency range is from 806 Mhz to 826 Mhz or 1420 Mhz ~1530 MHz, with only 20Mhz or 40Mhz frequency width for FHSS.
Our engineer recommended that you choose 1st version, as it can supply more frequent points to choose from when the signal is weak or interfered with.

Question 12

1. Can you show me this two-way data video link module real product video?

Accepted Answer

Yes, please check the blow video link at the youtube.

Video at Youtube

Question 13

2. Does this model support IP mesh? Is your full duplex link module support for signal relay?

Accepted Answer

This model support customizing the IP mesh function. There are three versions: 3km, 10km, and 50km according to build different the power amplifier.

Normal default full duplex link module support relay, you should buy at least three or more units. One unit is the transmitter, one unit as the receiver, and the other unit can put the middle between the transmitter and receiver as the relay/repeater/extender.

Question 14

3. Can you tell me how to connect your two-way data video link to the RF power amplifier?

Accepted Answer

The maximum RF transmission power of this two-way data video link module is 25±2 dBm, We also provides power amplifier to increase the RF Power to 2W/5W/10W. Below diagram shows how to add power amplifier outside of two-way digital data video link module.

Where is the IIC_SCL pin on the module?

Question 15

4. Can you show me what complete products by this wireless video data link module?

Accepted Answer

Yes, Please check the below link product, which is used the wireless video data audio two-way link module to assemble, just plus the Power ampleifier and encloser and accessory.

TX900

15km 30km 80km 150km long-distance wireless video transmitter receiver transmission transceiver PA 2W 5W 10W

Question 16

5. Can we monitor the module temperature By using web UI?

Accepted Answer

There was no function to query the temperature of the module.

Question 17

6. Can you sell the Morningcore module CX6600 to me? I want to assemble them by myself.

Accepted Answer

Sure. It is ok.
The Moningcore CX6600 (L1860C_P2P) is only an electronics module, you need to develop a peripheral circuit to support it, like power and ethernet and data Input Outport. And you also need to hire a software engineer to develop the firmware and UI for you.
As a trial sample, it is better that you can buy our complete products to test. After you test and use them, the quality is satisfied, then try to buy the module or parts to develop it by yourself. You can copy our design and improve it to be an excellent product.
After all, this is a radio transmission product, and any improper operation may interfere with the signal, resulting in shorter transmission distances.

Question 18

7. Regarding frequency- for testing, we will use 2.4 GHz. However, can we switch frequency bands to 1.4G or 800Mhz later if we change antennas to the right ones? As far as I understand this unit does not have PA.

Accepted Answer

Sure. support.
There is no optional frequency band of 2.4G modification on the web page, you need to send AT commands to modify or enter the Morningcore web page to modify.

Question 19

8. Do you have the exact dimension size? Special the fixing hole size by screw.

Accepted Answer

Question: Any recommendations on the PA + link module enclosure? Need an RF cavity filter? minimal box with cooling for the RF transistor?

Answer: The PA enclosure is CNC according to your design and construction. We used the electronic cooling fan. The encloser is a special CNC produced according to the UAV video data link module + Power Amplifier + cooling fan.

Please check the below picture. Our completed product, TX900, has only a link module + Power Amplifier and cooling fan.

https://i0.wp.com/ivcan.com/wp-content/uploads/2019/09/TDD-Transceiver-Model-T30P-2-watts-PA-power-amplifier.webp

Question 20

9. If I buy just a trial sample without the PA board what range will I get and is it possible to add PA later?

Accepted Answer

What range of the trail sample do you need?
We can offer you a 1~150 km range of the link module. You can add the PA later if you want. Min 15km and max 150km module cost is different.
The module can transfer the signal over 150km with the 10-watt PA to increase the signal. Without the PA, the transmission range is almost 10~15km.
If you buy one 15km range module, even you plus the PA, the range is almost 15~17 km range. The signal strength and ability of the anti-interference will increase much.

Question 21

10. How much current(amps )does the module draw?

Accepted Answer

The Power consumption is about 4W.
Current equals power consumption divided by supply voltage
4 / 12=0.33A, if you’re on a 12-volt supply.

Question 22

11. I need the 150 km transmission range wireless video data module, What frequency range is better?

Accepted Answer

There are two versions on the different frequency range.
1st version’s frequency range is from 1420 Mhz to 1530 Mhz, with 110Mhz frequency width for FHSS.
2nd version’s frequency range is from 806 Mhz to 826 Mhz or 1420 Mhz ~1530 MHz, with only 20Mhz or 40Mhz frequency width for FHSS.
Our engineer recommended that you choose 1st version, as it can supply more frequent points to choose from when the signal is weak or interfered with.

频带	2.4千兆赫(1Mbps的)	1.4千兆赫(1Mbps的)	800兆赫(1Mbps的)
20MHz带宽	-99dBm的	/	/
10MHz带宽	-102dBm的	-103dBm的	-103dBm的
5MHz带宽	-104dBm的	-106dBm的	-106dBm的
3MHz带宽	-106dBm的	-108dBm的	-108dBm的

提供远程	提供远程, 直流输入:7~30V
以太网1	4PIN ZH1.5mm 连接器
以太网2	RJ45 连接器
数据串口1	3PIN ZH1.5mm 连接器, TTL 3.3V
数据 UART2 和 UART3	6PIN PH1.25mm连接器, uart3作为控制串口和数据串口, TTL 3.3V
音频输入和输出	4PIN PH1.25mm连接器
USB	微型 USB 连接器, 用于软件升级
转变	外部功率放大器的 TX/Rx 控制信号
主天线	TX/Rx 天线端口, IPEX
第二天线	接收天线端口, IPEX
12输出电压	板载12V输出(<150毫安), 用于冷风扇电源
电源指示灯	红, 正常供电时灯亮
节点引导	蓝色, 收发模块作为接收节点时灯亮; 收发模块作为发射节点时闪烁
链接 LED	灯灭 – 表示该节点未链接到无线网络; 红灯——表示该节点已链接, 但无线信号弱; 橙色灯 – 表示该节点已链接, 无线信号中等; 绿灯——表示该节点已链接, 无线信号强.

销	信号	描述
音频输入	默认在线(指定麦克风输入)	音频将被发送到目标无线遥控模块.
音频输出	线路输出, 驱动耳机	当节点从远程无线模块接收到音频数据时, 音频将在此 PIN 上播放.
GND	GND	GND
控制	软件定义	音频输入的开/关开关控制

工作频段	1428〜1448MHz或802〜826MHz
信道带宽	1.4兆赫/ 3兆赫/ 5兆赫/ 10兆赫/ 20兆赫
调制方法	QPSK / QAM16 / QAM64
发射功率	300毫瓦, 2W¯¯, 5W¯¯
联网模式	点对点, 点对多点星形网络
传输距离	空对地15km, 30千米, 50千米, 80千米, 100千米
数据接口	2 网络端口 + 1 串行端口
无线传输速率	最高25Mbps, 在双向传输中由所有节点共享.
天线接口	2 SMA连接器
电源	7电压~30V (推荐12~28V)
尺寸	1025221.5毫米 (仅PCBA)
重量	127 克

27千米 110千米 NLOS 常问问题

最热 HDMI 超低延迟 常问问题

无线图传模块

FPV TX RX模块板

CVB到IP视频编码板

无线无线电链路模块

HDMI到IP编码板

双向无人机无线视频数据RC Control Link模块远距离双向收发器Transmitter-Receiver Vcan1681

双向无线传输数字数据视频链接模块 DLB

特征

灵敏度

接口定义

规范

常见问题

TX900

还有一个问题?

更多常见问题解答

相关帖子