模拟FPV无人机中继器继电器从750MHz重传到915MHz视频从5.8g到3.3g

重量和尺寸

频率定制案例

1. 中继器 (空气 5.8 ELRS 915MHz) (地面 4.9 ELRS750MHz)
2. 中继器 (空气 4.9 ELR 750MHz)(地面 5.8 ELRS915MHz)
3. 中继器 (空气 5.8 ELR 750MHz)(地面 4.9 ELRS915MHz)

YouTube的产品视频

常问问题

Q: 我的FPV空中单元以5.8g传输视频，并以915MHz接收数据. 我的地面单元在3.3GHz上进行视频, 遥控器为868MHz和915MHz. 如何在此设置中添加FPV继电器?
一个: 然后继电器视频应支持RX 5.8G和TX 3.3G. 空气单元和地面单元都不能同时使用915MHz, 您应该考虑在遥控器上使用750MHz, 您可以将915MHz移至我们的接力赛, 我们在您的接地单元遥控器中添加一个750MHz, 因此数据继电器是RX 915, 重新发送器TX 750MHz.

Q: How do I bind the controller to the repeater module?
一个: To bind the controller with the repeater module, please follow these steps: Using bind phrase, not physical button.

1. Power off the drone – ensure the drone is completely turned off before starting the binding process.

2. Bind the repeater to the controller – use the same procedure as you would to bind a drone to the controller.

3. Power off the controller – after the repeater is successfully bound, turn off the controller.

4. Bind the drone to the repeater – finally, use the repeater module to bind with the drone.

Following this sequence ensures a proper and stable connection between the controller, repeater module, and drone.

Q: Can the video and radio transmission frequencies of your FPV repeater be customized?
一个: 是, the FPV repeater can operate using our default frequencies or customized frequencies based on your requirements. When selecting custom frequencies, please ensure they are chosen to minimize interference with other devices and comply with local regulations.

Q: Which transmission frequencies does the 1.2GHz FPV repeater support? Do I need to set my FPV goggles to the same frequency for pairing?
一个: Our FPV repeater uses a 1.2GHz video transmitting and retransmitting system. To ensure proper transmission and reception, your FPV goggles must be set to the same frequency channel as the repeater. The supported channels and frequencies are:

• 甲烷: 1080 兆赫
• CH5: 1120 兆赫
• 甲烷: 1160 兆赫
• CH7: 1200 兆赫
• CH8: 1240 兆赫
• 频道9: 1280 兆赫
• H CH: 1320 兆赫
• C CH: 1360 兆赫

Please select the same channel and frequency on your FPV goggles to successfully receive the video signal from the repeater.

Q: What is the default transmission power of the FPV repeater, and what is the transmission range?
一个: The FPV repeater uses the following built-in transmitters:

• 1.2 GHz的视频传输器: 2.5 瓦特

• 2.4 GHz radio transmitter: 1 瓦

With this configuration:

• 该 video transmission range from the repeater to the remote controller can reach 取决于 3 千米.

• 该 radio control/data link from the repeater to the drone can reach 取决于 2 千米.

Please note that actual transmission distance may vary depending on several factors, 包含:

• 该 transmit power of the drone’s onboard video transmitter

• 该 transmit power of the remote controller’s radio

• 环境条件 (障碍, 干涉, 地形, 等等)

为了获得最佳性能, 我们建议使用 high-quality video transmitter on the drone and a sufficiently powerful radio controller.

• 用于远距离视频和数据传输的模拟 FPV 无人机中继器中继器

• FPV中继中继支持750MHz至915MHz变频

• 模拟 FPV 视频转发器，频率范围为 5.8GHz 至 3.3GHz，可扩展范围

• 适用于多频段视频和控制系统的专业 FPV 中继解决方案

• FPV无人机中继器兼容ELRS 750MHz和915MHz

• 远距离模拟FPV信号中继，转发稳定

• 用于空对地频率桥接应用的 FPV 继电器模块

• 用于复杂多频无人机设置的模拟 FPV 中继器继电器

• FPV视频遥测中继支持5.8G, 4.9G, 和 3.3G 频段

• 可靠的 FPV 信号中继器，适合延长飞行任务

• 专为低延迟视频中继而设计的模拟 FPV 转发器

• FPV无人机中继系统，用于分离视频和控制频率

• 为专业无人机用户提供频率可定制的 FPV 中继中继

• 模拟FPV中继解决方案，避免915MHz干扰冲突

• FPV中继中继提高信号覆盖范围和穿透力

• 用于远程无人机通信的多频段 FPV 中继转发器

• 模拟 FPV 中继模块非常适合中继无人机和机载中继器

• 用于先进 ELRS 控制网络的 FPV 变频继电器

• 适用于专业和工业无人机的稳定模拟 FPV 中继器继电器

• FPV 无人机转发中继，可扩展范围和灵活的频率规划