如何将自己的固件烧录到RV1126 AI IPC相机上
The first burning needs to use DriverAssistant to install the driver.
目录
Enter Maskrom/loader
进入刻录模式有以下三种方式:
1. reboot loader
After entering the system, run the reboot loader, and automatically enter the loader mode after restarting
Uboot:
After powering on, quickly press Ctrl + C to interrupt the Uboot startup, and then type the download command.
2. 短路
Power off, use tweezers to short the two points in the red circle above, and power on
3. Burning
Open RKDev_Tool, 它将显示 “found a Maskrom device” 要么 “found a Loader device”:
Select “升级固件”:
Click on “固件”:
A file selection dialog window pops up, select update.IMG, it may be stuck for a few seconds to load the firmware.
Then click upgrade:
You can see that the log on the right starts to show the burning process.