SHD5視訊解碼板

— H.265/H.264視訊解碼器, 高達4K的超高清輸出(3840*2160)
— 乙太網路輸入, HDMI+AV輸出
— Audio codec with audio input and output
— Video record with a Micro SD card or USB disk
— Web UI or uart for management
— 可選的: up to 4-ch 1080P video decoding and synchronous display

SHD5 video decoder board implements H.265/H.264 video decoding and audio codec, the video stream input via Ethernet is decoded and sent to display via HDMI and AV interface. The SHD5 decoder board features a range of comprehensive signal outputs including an HD video at 4K/1080P/720P, down-converted HD CVBS monitor video, and two analog audios is supported. SHD5 board also supports decoding a maximum of 4 channel 1080P videos at the same time and display via the split-screen mode(選項). SHD5 board includes DVR record functionality with a Micro SD card or USB disk using record switch controls. 此外, the SHD5 board supports a built-in RTSP server that enables video streaming over Ethernet for remote software or hardware decoders(選項). This board is in compact size and suitable for embedded applications and real-time live video monitoring via wireless link or Ethernet.

規範:

IO

HD video output	HDMI type A connector
Composite video output	4PIN PH2.0mm connector
Audio output	Embedded HDMI and 4PIN PH2.0mm connector
電源輸入	2PIN PH2.0mm connector
USB Host	USB type A connector
3.3V TTL data uart	3PIN PH1.25mm connector
3.3V TTL control uart	4PIN PH1.25mm connector
TF-Card	TF-Card slot
Key1	Switch key for OSD-display Or switch key for 4-ch video display
Key2	Switch key for video recording
Mic in	2PIN PH2.0mm connector
以太網絡	4PIN PH2.0mm connector

Video and Audio

Video output	HDMI and CVBS
Video formats	4K or 1080P or 720P 720*480 60一世(NTSC), 720*576 50一世(朋友) 可選的: split-screen for 4-ch 1080P videos and switch between videos
Video Decoding	H.265/H.264
Audio output	Embedded HDMI and Analog audio
Audio Decoding	AAC
Decryption	AES256
存儲	USB disk or micro SD card
Ethernet stream protocol	Support UDP TS stream decoding, RTSP client decoding, RTSP server forward

Monitoring and control
Setup via Web UI or control uart.

Temperature range
Full specification: 0° to +70°C Ambient(可選的: -40° to +85°C)
存儲: –40° to +85°C

Power requirements
Input range: 9~30VDC
能量消耗: <250mA@12V

Physical Characteristics
外形尺寸: 85.6*79.6毫米(not including connectors out of the board)
PCB thickness: 1.6毫米, the maximum height of up components less than 7mm, the maximum height of bottom less than 2.5mm.