5.8GHz 長距離無線資料鏈路模組 100Mbps MIMO | 乙太網路 UART SBUS | 5-15公里無人機遙測
目錄
概觀
該 5.8GHz Long-Range Wireless Transmission Link Module is a high-performance long-range wireless communication solution designed for professional UAV systems, 工業控制, 機器人技術, and telemetry applications. 在 5.8GHz頻段, 模塊支持 IEEE 802.11n compatibility and provides stable high-speed wireless data transmission using advanced dual-antenna MIMO technology.
With a maximum air data rate of 100 Mbps的 和一個 transmission distance of up to 15 空對地場景中的公里, the module is ideal for applications requiring reliable long-distance communication with low latency and high bandwidth. The module also supports ground-to-ground communication distances ranging from 300 儀表 1500 米, 取決於環境條件.
The module integrates multiple communication interfaces, 包含:
-
Ethernet transparent transmission
-
UART serial communication
-
SBUS signal input and output
These interfaces allow seamless integration with flight controllers, autopilots, 電腦, 相機, 工業設備, 和其他嵌入式系統.
Designed with 尺寸緊湊 (42.5 × 30.5 毫米) and weighing only 8.9 G, the module is highly suitable for space-constrained platforms such as drones and portable devices. The module operates with a wide input voltage range of 7–30V and maintains power consumption below 5.5W during full data transmission, ensuring efficient performance.
Configuration and system management are easily handled through a Web UI interface, allowing users to configure parameters such as channel selection, 串口波特率, and network mode.
The module also supports flexible network topologies, 包含:
-
Point-to-Point communication
-
Point-to-Multipoint communication
-
Star network topology
With robust design, high transmission efficiency, and flexible connectivity, the wireless module provides a powerful wireless communication backbone for demanding professional applications.
特徵
Long-Range Wireless Communication
The module provides long-distance wireless communication up to 15 空對地場景中的公里. This capability makes it suitable for UAV telemetry, 遠端監控, and long-range control systems.
High Speed Data Transmission
與一個 maximum air data rate of 100 Mbps的, the module supports high-bandwidth applications such as real-time video streaming, telemetry data transfer, and network communication.
雙天線MIMO技術
內建 MIMO (多輸入多輸出) wireless architecture uses two antennas to improve signal reliability, increase throughput, and enhance resistance to interference.
多種數據接口
The module integrates several communication interfaces:
-
Ethernet port for network data
-
UART serial port for device communication
-
SBUS input and output for RC systems
This multi-interface design makes the module adaptable for various systems and devices.
IEEE 802.11n Compatibility
The module supports the IEEE 802.11n wireless standard, ensuring stable performance, wide compatibility, and efficient wireless communication.
數據透明傳輸
兩者都 Ethernet port and serial interface support transparent data transmission, allowing data to be transmitted without modification between devices.
靈活的網絡模式
The module supports multiple network configurations:
-
可選距離等級
-
可選距離等級
-
Star network topology
This flexibility enables deployment in complex communication networks.
寬電壓輸入
The power input supports 7V to 30V DC, allowing easy integration with UAV batteries, vehicle power systems, and industrial power supplies.
Web-Based Configuration Interface
該模塊包括一個 用戶友好的網絡用戶界面 for configuration and management. Users can easily adjust network parameters, transmission settings, and serial port configurations through a browser.
緊湊、輕巧的設計
以其 small size and lightweight construction, the module is optimized for embedded applications such as drones, 機器人技術, and portable communication devices.
產品規格
Wireless Specifications
頻帶: 5.8 千兆赫
無線標準: IEEE 802.11n compatible
無線帶寬: 20 兆赫
Maximum Air Data Rate: 100 Mbps的
Maximum Transmission Power: 29 dBm的
天線配置: Dual antenna MIMO
傳輸距離:
空對地面: 5 - 15 千米
地面到地面: 300 - 1500 米
Supported Network Topology:
- 可選距離等級
- 可選距離等級
- 星際網絡
Supported Channels and Center Frequencies:
| 渠道 | 中心頻率 (兆赫) |
|---|---|
| 36 | 5180 |
| 40 | 5200 |
| 44 | 5220 |
| 48 | 5240 |
| 149 | 5745 |
| 153 | 5765 |
| 157 | 5785 |
| 161 | 5805 |
| 165 | 5825 |
Hardware Specifications
模組尺寸: 42.5 × 30.5 毫米
PCB Thickness: 1.6 毫米
重量: 8.9 G
Component Height:
Top side: < 4.5 毫米
Bottom side: < 2.5 毫米
Power Input Voltage: 7V – 30V DC
能量消耗:< 5.5W during full transmission
Interface Specifications
以太網端口
類型: 100 Mbps bidirectional wireless transparent Ethernet
連接器:4-銷 1.25 mm locking connector
UART & SBUS Interface
類型: Bidirectional transparent UART + 系統總線
連接器: 5-銷 1.25 mm locking connector
Default UART Level: TTL 3.3V
Optional UART Level: RS232 (customizable during production)
Supported Baud Rates: 1200 / 2400 / 4800 / 9600 / 38400 / 57600 / 115200 / 230400 / 460800 / 921600
Baud rate configuration is available through the Web UI.
天線接口
可選距離等級: IPEX antenna connector
可選距離等級: IPEX antenna connector
電源接口
連接器: 4-銷 1.25 mm locking connector
Voltage Range: 7V – 30V
5V輸出
連接器: 2-銷 1.25 mm locking connector
輸出電壓: 5V regulated output for cooling fan power supply.

LED指標
電源指示燈
顏色: 紅
地位: Always on when power is supplied.
節點指示燈
顏色: 藍色的
AP模式: Solid on
Station Mode: 閃爍
鏈路指示燈
| LED Status | Meaning |
|---|---|
| 離 | No wireless connection established |
| 紅 | Wireless link connected, but signal very weak |
| 橙子 | Wireless link connected with moderate signal |
| 綠色 | Wireless link connected with strong signal |

應用
The wireless transmission module is suitable for a wide range of professional and industrial wireless communication scenarios.
UAV Communication Systems
The module is ideal for drone telemetry and control systems, enabling reliable long-distance communication between UAVs and ground control stations.
Industrial Automation
In industrial environments, the module can be used for wireless machine control, 遠端監控, and equipment networking.
機器人技術
Robots requiring long-distance wireless communication can benefit from the module’s high-speed data transmission and stable connection.
遠程監控系統
The module enables wireless data transmission for sensors, 監控系統, and remote data acquisition.
自動駕駛汽車
For autonomous vehicles and mobile robots, the module provides stable communication links for navigation data and system control.
Wireless Network Bridges
The Ethernet transparent transmission function allows the module to be used as a wireless Ethernet bridge for network extension.
RC Control Systems
集成 SBUS接口 supports remote control applications and can connect directly to flight controllers and RC receivers.
自定義選項
To meet the requirements of different applications, the module supports various customization options.
Serial Interface Customization
The default serial interface uses TTL 3.3V電平, but it can be customized to RS232電平 according to customer requirements.
固件自定義
Custom firmware configurations can be developed to support specific communication protocols or specialized functions.
天線選項
Different antenna types can be selected depending on transmission distance and environmental conditions, 包含:
-
高增益定向天線
-
Omnidirectional antennas
-
Custom antenna cables
Connector Customization
Alternative connectors or cable assemblies can be customized for integration with specific devices.
OEM品牌
Manufacturers and distributors can request OEM貼牌, customized packaging, and branding for integration into their own products.
常見問題解答 (常問問題)
Q:What is the maximum communication distance of the module?
一個: 該模塊支持 5–15 km air-to-ground communication 和 300–1500 meters ground-to-ground transmission, depending on antenna type, 環境, and installation conditions.
Q:Does the module support point-to-multipoint communication?
一個: 是. 該模塊支持 點對點, 點對多點, and star network topologies, making it suitable for multi-device communication networks.
Q:How is the module configured?
一個: The module can be configured using a Web UI management interface. Users can access the configuration page through a browser to adjust parameters such as wireless channel, 網絡模式, and serial port settings.
Q: What serial baud rates are supported?
一個: The module supports multiple baud rates, 包含:
1200, 2400, 4800, 9600, 38400, 57600, 115200, 230400, 460800, 和 921600.
Q: What type of antennas does the module use?
一個: The module uses IPEX antenna connectors for both ANT1 and ANT2 ports, allowing connection to external antennas.
Q: What power supply does the module require?
一個: The module supports a 7V to 30V DC input voltage, making it compatible with various power systems including drone batteries and industrial power supplies.
Q: Can the module output power for external devices?
一個:是. The module provides a 5V regulated output that can be used to power accessories such as cooling fans.
Q: 模塊功耗是多少?
一個: During full data transmission, the module consumes less than 5.5W, ensuring efficient operation even in battery-powered systems.



iVcan.com –
I’ve been using this 5.8GHz Long-Range Wireless Data Link Module in my UAV telemetry setup, and the performance has been excellent. The connection is very stable even at long distances, and the signal strength indicators make it easy to monitor the link quality. The dual-antenna MIMO design really improves reliability, especially in environments with interference. Setup through the Web UI was straightforward, and integrating the Ethernet and UART interfaces with my flight controller was simple. 全面的, it’s a compact, lightweight module that delivers fast data transmission and dependable long-range communication.