Table of Contents
1. Does your COFDM video encoder modulator transmitter module support 3.6G?
Yes, 我們的 COFDM transmitter modulator module supports 1.4-2.4-3-3.6-4-4.9-5-5.8-6Ghz
2. Does your COFDM demodulator decoder receiver module support 3.6G?
不, our COFDM demodulator decoder receiver module only supports 170-860Mhz. You need to use a frequency down converter module to work well with the 3.6G transmitter module.
3. Does your COFDM video relay repeat module support 3.6G?
Yes, 我們的 COFDM video relay repeat module supports a 3.6G transmitter and sends out, the receiver parts you need to use a frequency down converter block module to get the signal correctly from a 3.6Ghz transmitter.
The relay module transmission signal does not need a frequency down converter block module, and the reception also uses a normal COFDM video receiver module, which only supports up to 860MHz. If you need to receive higher frequency signals, 喜歡 3.6 千兆赫, you need to add a frequency down converter block module.
4. How about the test result of your COFDM video encoder modulator transmitter module at 5 百萬赫?
5GHz test also has output, the signal is slightly smaller
新硬體的獨立COFDM發射模組支援3GHz以上, and its output signal is the same as that of the relay module, so you can first use the relay module with your own 3 Ghz~4 Ghz PA test. If the test is OK, then purchase a separate COFDM transmitter module.
如果需要的話, you can also directly purchase samples of COFDM transmitter modules supporting 3 Ghz~4 Ghz frequency bands for testing
The following is the picture of our COFDM transmitter module Tx signal spectrum analyzer when we tested 3.5GHz and 4GHz (8MHz頻寬)
5. What is the frequency range of the cofdm receiver?
Although the COFDM transmitter supports a frequency range of 70-3500Mhz, the receiver does not support such a wide range and currently only supports 161-860Mhz. If you still want to use an operating frequency beyond this range, you need to use a frequency downconverter.
Ask A Question
感謝你的回應。 ✨