150km 200km wireless data transmission telemetry transceiver Data Link
Our digital radio is mainly used for high-power long-distance industrial data transmission.
It has a small size, good integration, and high sensitivity.
Work in the 902~928MHz frequency band.
The transmission distances supported 100km and 200km, tương ứng.
Mục lục
Tính năng, đặc điểm
Dải tần số: 902-928MHz
Spread spectrum method: Mô hình này được thiết kế để truyền dữ liệu và video không dây với liên kết dữ liệu không dây hai chiều
Mã hóa dữ liệu: 256-bit physical layer encryption
Communication range: up to 100km/200km
Nguồn ra: 10W (40dBm)
Air interface rate: up to 276.4kbps
Serial port baud rate: up to 921.6kbps
Nhiệt độ hoạt động: -40°C to 85°C
Đặc điểm kỹ thuật
Instructions for placing an order
Serial port is TTL or RS232
What baud rate needs to be set
receiver Antenna
At the default package, chúng tôi sẽ gửi cho bạn 2 pcs omnidirectional antenna for the transmitter and receiver. If your transmission range is over 100km, it is better to change a directional antenna to the ground receiver and try to install it as high as possible.
Câu hỏi thường gặp
- Support Pixhawk autopilot.
- Can send rand receiver the data, but no video, if need data+video, hãy kiểm tra TX900
- The working frequency is from 902Mhz to 928Mhz.
- A small antenna in the air unit is omnidirectional, kể cả.
- A big antenna in the ground unit, it is better to use a directional antenna, không bao gồm.
- Our wireless data transmission supports multi-point-to-point networking, and one ground unit can control multiple drones.
- You should buy a new one and pair them.
- Vâng, it is full-duplex.
- We can customize the data port to RS232 if you need.
-
It doesn't matter if the serial port baud rate is changed to 115200, but the corresponding serial port baud rate of the flight controller must also be changed to 115200.
- Tất nhiên, you can also change the serial port baud rate to 57600. The biggest impact is that the flight control may increase the amount of data as the serial port baud rate increases. This is the only impact.
-
10-watts Power Amplifier model needs 24V power supply
Configuration Tool Software
Tải về https://drive.google.com/file/d/1ACNyk_xsgtlLXPBPTWp-qpyqPjGk8UQT/view?usp=drive_link
Hướng dẫn sử dụng
Users Manual online (HTML)
Users Manual online (PDF)