Nhiều máy ảnh cho một máy thu cho máy phát và máy thu video không dây, đa điểm đến một điểm

Nhiều máy ảnh cho một máy thu cho máy phát và máy thu video không dây, đa điểm đến một điểm

The equipment used in the demonstration video.

Toàn bộ TX900 four sets, three sets TX900 with IP camera, one set with a computer as the receiver.

Testing process

Chào, customers often ask us whether our long-range wireless video data transmission transceiver can support many cameras and transmitters to one receiver.

Trong video này, I demonstrate the result of this operation. We linked three cameras and transmitters and used a receiver connected to a computer’s screen as a monitor. Select quad screens in the RTSP player, and you will see the screens of three cameras at the same time.

At the end of the video, our lens will capture three IP cameras and transmitters respectively.

Although I only tested the multi-point-to-point transmission video of this function indoors, Trên thực tế, it can still support the transmission range of 10-150 cây số.

Because the bandwidth of this equipment is 30M bps, it is recommended to connect 5-6 máy ảnh, and the transmission rate of each camera can be maintained at 5M bps. If there are more than 5-6 máy ảnh, the picture may freeze.

Our other model can achieve 110M bandwidth and can support more cameras, but the farthest transmission distance is within 22 cây số.

Trong video, you can see. Both the transmitting and receiving antennas are very short, as a professional wireless video transmitting and receiving device, it has a wide range of uses.

Many customers use it to install it on drones, which can provide real-time video and data as far as 150 km, and can also be installed in wireless broadband systems from shore to ship, or installed on ground robots or unmanned vehicles, even if it is not In the line-of-sight scenario, there are obstacles between the transmitter and the receiver, and the super diffraction capability can also transmit a distance of 1 kilometer. It can also be used for firefighting, wedding video recording, vv.

If you have any project that needs to use a wireless video transmitter and receiver for video data RC control transmission, xin vui lòng liên hệ với chúng tôi, we can provide consultation and testing for free.

How to Choose the Right Transmitter and Receiver with Multi-Point to One-Point Support?

There are several factors to consider when selecting a transmitter and receiver for multi-point to one-point support.

Ngày thứ nhất, the type of camera signal that must be transmitted must be determined. Different camera video outputs necessitate different types of transmitters and receivers. If the signal is an IP ethernet camera, then the transmitter should have IP ethernet video input, if the signal is HDMI or CVBS, then the transmitter needs to plus one HDMI / CVBS encoder to IP ethernet.

Thứ hai, the range of the signal must be considered, most long-range video transmitters and receivers support 10km, 30km, 50km, 80km, 100km, 120km, 150km, and even over 200km. A higher-power amplifier for the transmitter and receiver should be used if the signal must be transmitted over a long distance. If the signal must be transmitted over a short distance, Tuy nhiên, a lower-power transmitter and receiver should be used. Our recommended model TX900 power amplifier has 300mW, 2 watt, 5 watt, và 10 watt.

Ngày thứ ba, the antenna type should be considered. Different antennas are designed to receive different types of signals. A directional antenna, ví dụ, is best suited for long-distance signal transmission, whereas an omnidirectional antenna is best suited for short-distance signal transmission. Please check the more optional antenna for the transmitter and receiver, https://ivcan.com/price-list-for-wireless-video-transmitter-receiver-antenna/

Cuối cùng, the cost of the transmitter and receiver should be considered. Different types of transmitters and receivers are priced differently, so it is critical to choose one that fits within your budget. According to the transmission distance and amplifier you need for your project, it is good to choose the best model to save costs.

if you have any questions about the multi-Camera to one receiver for wireless video transmitter and receiver, xin vui lòng tiếp xúc chúng ta.

Multi-Camera to one receiver for wireless video transmitter and receiver diagram

RTSP player software download

We used the below Windows player (named Easyplayer) as the test IP camera player. https://github.com/tsingsee/EasyPlayer-RTSP-Win

Hỏi đáp

câu hỏi: We need to ensure the transmission of the FHD 1920×1080 video signal from a video camera (8 chiếc) to one receiver at a distance of 500 mét. Tell me what solutions you can offer GSM, Wi-Fi video output: 1 x HD-TVI/AHD/CVI/CVBS. What products and solutions can you offer?

Câu trả lời: Before quoting you the suitable products, we have some questions for your demand.

1. Are the external interfaces of the 8 cameras HDMI/…/Ethernet?
2. Are the 8 cameras transmitted from the same point to one receiving point at the same time, or are the 8 điểm (each point has 1 Máy ảnh) transmitted to one point? Hoặc là?
3. Output at the receiving point: Is the network port output OK? Or does it need HDMI or other video interface?

I will offer you a solution after receiving your demand details.