Multi-Camera to one receiver for wireless video transmitter and receiver, multi-points to one point

Multi-Camera to one receiver for wireless video transmitter and receiver, multi-points to one point

The equipment used in the demonstration video.

Całkowity TX900 four sets, three sets TX900 with IP camera, one set with a computer as the receiver.

Testing process

Cześć, customers often ask us whether our long-range wireless video data transmission transceiver can support many cameras and transmitters to one receiver.

W tym filmie, I demonstrate the result of this operation. We linked three cameras and transmitters and used a receiver connected to a computer’s screen as a monitor. Select quad screens in the RTSP player, and you will see the screens of three cameras at the same time.

At the end of the video, our lens will capture three IP cameras and transmitters respectively.

Although I only tested the multi-point-to-point transmission video of this function indoors, W rzeczywistości, it can still support the transmission range of 10-150 kilometrów.

Because the bandwidth of this equipment is 30M bps, it is recommended to connect 5-6 kamery, and the transmission rate of each camera can be maintained at 5M bps. If there are more than 5-6 kamery, the picture may freeze.

Our other model can achieve 110M bandwidth and can support more cameras, but the farthest transmission distance is within 22 kilometrów.

In the video, you can see. Both the transmitting and receiving antennas are very short, as a professional wireless video transmitting and receiving device, it has a wide range of uses.

Many customers use it to install it on drones, which can provide real-time video and data as far as 150 kilometers away, and can also be installed in wireless broadband systems from shore to ship, or installed on ground robots or unmanned vehicles, even if it is not In the line-of-sight scenario, there are obstacles between the transmitter and the receiver, and the super diffraction capability can also transmit a distance of 1 kilometer. It can also be used for firefighting, wedding video recording, itp.

If you have any project that needs to use a wireless video transmitter and receiver for video data RC control transmission, skontaktuj się z nami, we can provide consultation and testing for free.

How to Choose the Right Transmitter and Receiver with Multi-Point to One-Point Support?

There are several factors to consider when selecting a transmitter and receiver for multi-point to one-point support.

Pierwszy, the type of camera signal that must be transmitted must be determined. Different camera video outputs necessitate different types of transmitters and receivers. If the signal is an IP ethernet camera, then the transmitter should have IP ethernet video input, if the signal is HDMI or CVBS, then the transmitter needs to plus one HDMI / CVBS encoder to IP ethernet.

Drugi, the range of the signal must be considered, most long-range video transmitters and receivers support 10km, 30km, 50km, 80km, 100km, 120km, 150km, and even over 200km. A higher-power amplifier for the transmitter and receiver should be used if the signal must be transmitted over a long distance. If the signal must be transmitted over a short distance, Jednakże, należy zastosować nadajnik i odbiornik o niższej mocy. Nasz rekomendowany przez nas wzmacniacz mocy model TX900 ma moc 300mW, 2 waty, 5 waty, i 10 waty.

Trzeci, należy wziąć pod uwagę typ anteny. Różne anteny są zaprojektowane do odbioru różnych typów sygnałów. A directional antenna, Na przykład, najlepiej nadaje się do transmisji sygnału na duże odległości, natomiast antena dookólna najlepiej nadaje się do transmisji sygnału na małe odległości. Sprawdź bardziej opcjonalną antenę dla nadajnika i odbiornika, https://ivcan.com/price-list-for-wireless-video-transmitter-receiver-antenna/

Wreszcie, należy wziąć pod uwagę koszt nadajnika i odbiornika. Różne typy nadajników i odbiorników różnią się ceną, dlatego ważne jest, aby wybrać taki, który mieści się w Twoim budżecie. W zależności od odległości transmisji i wzmacniacza potrzebnego do Twojego projektu, dobrze jest wybrać najlepszy model, aby zaoszczędzić koszty.

jeśli masz jakiekolwiek pytania dotyczące połączenia wielu kamer z jednym odbiornikiem do bezprzewodowego nadajnika i odbiornika wideo, proszę bardzo kontakt nas.

Multi-Camera to one receiver for wireless video transmitter and receiver diagram

RTSP player software download

Użyliśmy poniższego odtwarzacza Windows (o nazwie Easyplayer) jako testowy odtwarzacz z kamerą IP. https://github.com/tsingsee/EasyPlayer-RTSP-Win

FAQ

Pytanie: Musimy zapewnić transmisję FHD 1920×1080 sygnał wideo z kamery wideo (8 szt) do jednego odbiornika w odległości 500 metrów. Powiedz mi, jakie rozwiązania możesz zaoferować GSM, Wyjście wideo Wi-Fi: 1 x HD-TVI/AHD/CVI/CVBS. Jakie produkty i rozwiązania możesz zaoferować?

Odpowiedź: Zanim zacytujesz odpowiednie produkty, mamy kilka pytań w związku z Twoim żądaniem.

1. Czy zewnętrzne interfejsy 8 kamery HDMI/…/Ethernet?
2. Czy 8 kamery transmitowały z tego samego punktu do jednego punktu odbiorczego w tym samym czasie, or are the 8 zwrotnica (each point has 1 kamera) transmitted to one point? Lub?
3. Output at the receiving point: Is the network port output OK? Or does it need HDMI or other video interface?

I will offer you a solution after receiving your demand details.