UAV drone data link module module wireless video transmitter le receiver bakeng sa khamera e telele ea TDD transceiver ea litsela tse peli vcan1401

UAV drone data link module module ea wireless video transmitter le receiver bakeng sa khamera ea litsela tse peli tse telele tsa TDD transceiver e bobebe.

UAV drone sehokelo sa data sa video Molemo

1. E nyane ka boholo 7.2X4.8X1cm, e bobebe (ka tlase ho 60 dikgerama), 2X5-watt PA dimension
2. bolelele bo bolelele. The omnidirectional fiberglass antenna e ka fihla 30 km SE. Antenna ea tataiso e ka fihla 50KM
3. Ka nako e tšoanang, e na le 2 bidirectional RS232 serial likou, tse loketseng ho kenya le ho kenya data.
4. Nako e fokolang e ka fihla ho 28ms (ho sa kenyeletse ho rekota khamera le ho beha leihlo nako ea ho bonts'a)
5. 20ms ho sa kenyeletsoe sehlahlo le khamera. 1080P 60 hoo e ka bang 80ms
6. Ho sebelisa TDD-OFDM protocol ea phetiso, bolelele bo bolelele, palo e kholo ea data, mahala marangrang, a tsitsitseng le a tšoarellang.
7. Ho sebelisa likarolo tse pharaletseng tsa mocheso, e ka sebetsa ka tloaelo ho tloha -40 likhato ho 85 likhato
8. IP67 tšireletso e ka sebelisoa libakeng tse thata tsa kantle ka nako e telele.
9. Ha ho bapisoa le marokho a tloaelehileng, sebaka ke 10 linako tse ling tsa mekhoa e tloaelehileng ea phetisetso ea WIFI.
10. Meetso e mengata ea phepelo ea motlakase e mengata, botshepehi bo phahameng.
11. Li ntlafalitsoe ka ho khetheha bakeng sa ho phallela video.

kopo

1. Sepheo se seholo: Sebelisana le lik'hamera tsa IP ho fetisetsa data ea video ka nako e telele.
2. Tlhokomelo ea ts'ireletso: joalo ka temoso ea temo, tlhokomelo ea indasteri, tlhokomelo ea polokelo ea fektheri, tlhokomelo ea metsi, thibelo ea mollo oa meru, ho lekola thaba, joalo-joalo.
3. Inthanete ea Lintho: Phetiso ea data ea marang-rang ea Ad hoc.
4. UAV Drones: litšoantšo, phetiso ya data.
5. Indasteri e khethehileng: seteishene sa motlakase, paballo ea metsi, joalo-joalo.
6. Tšireletso ea sechaba le litima-mollo tsa mapolesa a hlometseng: miniaturized setšoantšo phetiso ka customized. Ka mohlala, lik'hamera tse ngata tsa marang-rang.

ga tlhaloso

1. sebetsa maqhubu: Default 1.4G kapa 2.3G (2310-2380Mhz) sehlopha
2. E hahelletsoe 2 * 1Sehlomathisi sa Matla sa W
3. Phepelo ea motlakase: 7-18V

Sephetho sa Mohokahanyi

hlalosa:

matla a pontsho	LED P2	LED P3	LED P4
> -70	ka mehla	ka mehla	ka mehla
-71 ho -75	ka mehla	ka mehla	-75
-75 ho -80	theoha	ka mehla	ka mehla
-80 ho -83	ho	-80	le
-83 ho -88	ka mehla	theoha	theoha
ka tlase ho -88	kganya	theoha	theoha
ha pontšo	marquee

5, Data Serial Port, 1.25mm sehokedi, 232 boemo. (li-motherboards tse ling li na le serial port feela 1, ha ho boema-kepe ba serial 2)

nomoro ea letoto	mosebetsi
1	lakg
2	5Tlhahiso ea V
3	Seriale 2 script
4	Seriale 2 TX
5	Seriale 1 script
6	Seriale 1 TX

6, 26Hlakola LNA 0.5mm FPC sehokelo sa thapo se tenyetsehang, hlalosoa ka tsela e latelang:

nomoro ea letoto	mosebetsi	Hlokomela
1	5V	khumo
2	5V	khumo
3	NC
4	RF1	Phetoho ea RF1
5	RF2	Phetoho ea RF2
6	ANTD	Phetoho ea Antenna
7	NC
8	NC
9	TS'ELISO TS'OA	MESH firmware reset
10	LNA2_LED
11	LNA1_LED
12	lakg
13	12V	12V input
14	12V	12V input
15	lakg
16	RSSI_H	Letšoao la Matla a Letšoao le Amohetseng: E matla
17	RSSI_M	Letšoao la Matla a Letšoao le Amohetseng: Mahareng
18	RSSI_L	Letšoao la Matla a Letšoao le Amohetseng: E fokola
19	ANTC	Antenna Switch on/off
20	PA1	matla seholisa-molumo 1 Fetoha
21	boikhethelo kereiti ea sebaka	Antenna 1 Fetoha
22	LAN1_TX_N	Network Port
23	LNA1_TX_P	Network Port
24	lakg
25	LNA1_RX_N	Network Port
26	LNA1_RX_P	Network Port

7, matla Keletso: 7-18V, lipalo tse ntle le tse mpe li thibetsoe ho khutlisoa! Ho seng joalo, e tla senyeha

Ka kopo tjheseletsa terata ka kotloloho kapa weld sehokelo sa XT30. Sehokelo se boetse se tšoailoe ka lipalo tse ntle le tse mpe, u se ke ua e khutlisa!

8, Onboard Pin Network Port:

Sekhahla sa phini ke 1.27mm, 4PIN (Sebaka sena sa marang-rang se ka hlophisa feela data ea sesebelisoa sa lehae le motho e mong, 'me ha e khone ho fumana lintlha tsa LAN6 le LAN9)

9, 20PIN 0.5mm FPC sehokelo sa thapo se tenyetsehang, tlhaloso e tjena: (e fanoeng hamorao)

10, Boema-kepe ba LAN:

1.25mm sehokedi, Haeba hangata e hokeloa le ho hangoa, ho kgothaletswa hore o kopane ka ntle ho sokete ea RJ45 le transformer ea ho itšehla thajana.

1. LAN-RX-P
2. LAN-RX-Basali
3. LAN-TX-P
4. LAN-TX-N

11, Boema-kepe ba LAN: 12Khokahano ea PIN, PCI-E, le sebopeho sa USB

12, Sehokelo sa Fane: GND e thehiloe, 5Liphetho tsa V 5V, VCC e hokahane le phepelo ea motlakase e ka sehloohong, mme sehokedi ke 78172 letoto

13, Sesepa sa jumper:

1. E fetole sebakeng sa ON ho tima matla a amplifier ea RF1.

2. E fetole sebakeng sa ON ebe o tima matla a amplifier ea RF2.

3, e sa sebedisoang.

4. Khutlisa litlhophiso tsa feme.

Ka mor'a ho bulela le ho kenya tsamaiso, letsetsa khoutu ho 1 bakeng sa ho feta 5 metsotsoana, ebe o letsetsa khoutu ho 0 ho khutlisetsa litlhophiso tsa feme.

Sesebelisoa sa Configuration ea Parametha bakeng sa Khoaso ea Windows Software

2.3G-2.4G frequency

1.4G frequency

1: Na sehokelo sena sa data sa drone se tšehetsa marang-rang a IP mesh?

Le hoja mohlala ona o tšehetsa IP mesh, e na le litšenyehelo tse eketsehileng. Tšehetso e phahameng ea marang-rang ea IP mesh ke 10km pakeng tsa lintlha tse peli.

Moetso oa kamehla ha o kenyelletse tšebetso ea marang-rang ea IP mesh. Ka kopo ikopanye le rona bakeng sa lintlha pele ho odara le thomello.

2. Na e sebetsa ho Point to Point le ntlha e le 'ngoe ho ea ho Multi-Points?

E, mojule ona oa khokahanyo oa data oa video o se nang mohala o tšehetsa ntlha le ntlha e le 'ngoe ho ea ho lintlha tse ngata. Ho nahanoa ka lebelo la bandwidth le phetisetso, moenjiniere oa rona o fana ka maikutlo a ho hokahanya ho fihlela ho lintlha tse 'nè ka nako e le' ngoe.

3. Mokhoa oa ho leka ho lieha ha mojule oa khokahano ea data ea video ea litsela tse peli?

Thanks.

Ke tla nka video ea liteko ho u bontša mekhoa e nepahetseng le latency ea 'nete ea module ea li-wireless video audio link..

4. A na u ka etsa sehokelo sa li-wireless video tsa hau ho sehlopha sa 2.4ghz?

1.4G e na le stock.
Moenjiniere o ile a mpolella hore a ka fetola maqhubu ho tloha ho 1.4G ho ea ho 2.3G (2310-2380Mhz), ha e khone ho 2.4G hona joale.

potso: Can you make it the working frequency at 2280-2380Mhz?

tšoarelo, no we don't have it at 2280-2380Mhz, only 2310-2380Mhz.

5. Does your wireless video data transmission support mesh Ad Hoc networking? Do you have a user guide?

One version of our wireless video data transceiver supports mesh Ad Hoc networking. Ka kopo, re bolelle haeba u hloka ts'ebetso ena. The default is point-to-point networking. (one transmitter to one receiver).

Please check the users guide for the mesh Ad Hoc network version at the below link.

https://ivcan.com/ip-mesh-ad-hoc-network-user-guide/

6. For Vcan1401-Mesh, do you have a JSON command set? I want to integrate it into our Linux code.

E, we can offer you. I confirm that this model allow to control the channels via serial commands.

Ka kopo, khoasolla sehokelong se ka tlase.

Vcan1401-Mesh system HTTP Json Management Interface Description 1.3

Vcan1401-Mesh serial port control function description

Vcan1401-Mesh系统HTTP JSON管理接口说明

Vcan1401-Mesh串口控制功能说明

7. Do you have an operating guide for the Vcan1401-Mesh module?

E, we can offer you.

Ka kopo, khoasolla sehokelong se ka tlase.

Vcan1401-Mesh Ad hoc network communication station operation guide

Vcan1401-Mesh自组网通信电台操作指南

https://ivcan.com/ip-mesh-ad-hoc-network-user-guide/

Vcan1401 mesh version serial port AT setting routine description

8. I need a drone application data link modem having following: Bi-Directional Ethernet, Bi-Directional Rs-232, Minimum data rate 4Mbps, Minimum range 30 Km, size 70mm * 50 limilimithara * 20 limilimithara

1. Support RJ45 IP Ethernet (IP camera or computer)
2. Support Rs-232 data port. (shell printed COM, 5, Data Serial Port, 1.25mm sehokedi, 232 boemo.
3. Support 10Mbps
4. 2x1W PA support 10~30km
   2x2w PA support 30~50km
5. 2x1W 7.2X4.8X1cm (72x48x10mm) ka tlase ho 60 dikgerama
6. Only 1.4G now, not support 2.1G or 4.8G as working frequency.

9. If I buy 3 pieces of this device, can I put one of them in the middle of the transmitter and receiver to function as a repeater?

1. OK.Support as relay to extend long-range.
2. The device between the transmitter and receiver needs to be configured as the master, and the other two as slaves.

10. May I have some questions on the customize and development of your model?

potso: Can it work like 2 modems in air and one on ground. modems in air send their video to the one on ground. do you have any demo video i would like to see.

karabo: Support two transmitters in the air and one receiver on the ground.

potso: Would you change the frequency band may be in L, S or C. we will tell you the particular frequency band like 1.1 Ghz to 1.2 Ghz or 2.1Ghz to 2.2 Ghz or 4.8 Ghz to 4.9 Ghz.

karabo: We can customize the frequency according to your demand. But the cost will be higher and time needs longer.

potso: Also we would like to increase the range, may be from 30 km ho 100 km SE.

karabo: Increase PA then increase the transmission distance. We have some models support 100~150km wireless transmission distance.

potso: Also in some modems we would like to have mesh networking waveform having relay, ptp and mesh capability.

karabo: Ho lokile, we have some models that support the above function.

Please put 3rd unit between the transmitter and receiver as a relay to extend the wireless transmission range.

potso: We would also like to customize waveform, modem size, frequency band and other functionalities.

karabo: OK, please test our sample first. And tell us the exact what you really need.

potso: Can we decrease the data rate to increase range?

E, from the air unit to ground unit, 2.4G transmission distance is 15km and it is 1.5km from ground unit to the ground unit. (the transmitter and receiver are both on the ground to use).

11. Would you tell me where can I set the AES encryption password?

Ka kopo, sheba setshwantsho tlase.