30-millisecond Drone UAV HDMI Wireless video transmitter
Ultra-low-latency 30 ~ 40 millisecond UAV HDMI Wireless Video Transmitter Drone wireless transmitter system bakeng sa Drone Camera Vcan1729
The latency ea kamehla COFDM transmitter le moamoheli ke 200-300 milliseconds.
Sistimi ea transmitter ea video e se nang mohala e na le nako ea ho lieha ho feta 30 milliseconds.
Tafole ea likateng
Feature
- haholo kopantswe, modular kopantswe moralo
- Amohela theknoloji ea modulation ea COFDM
- Theknoloji ea compression ea video e thehiloeng ho FPGA ea H.265
- Ho lieha ha video ho tlase haholo (phetisetso e lieha ho feta 30 milliseconds)
- All-pota le puisano e, tšabe ea ho haha mabota
- Puisano e pharalletseng lipakeng tsa maeto,
- Mokotla oa aluminium o nang le sekoti sa mocheso, e thibelang ho tshoha ebile e hanana le tshusumetso
- Bao e seng mola-ea-pono (NLOS) phetiso ea mehala, e nang le sebaka se seng ka tlase ho 20 lik'hilomithara tse tlas'a maemo a pono
- Lebelo le phahameng la ho tsamaea le ka fihla ho 600Km / hora (lekantsoe)
- Tlhaloso e feletseng e fumaneha
kopo
- E sebelisetsoa li-drones tse fofang ka lebelo le phahameng 'me li hloka boleng ba video ba 1080P.
- Sehlahisoa sena se ne se sebelisoa haholo ke mafapha a ts'ireletso ea sechaba le tlhahlobo ea ts'ireletso bakeng sa tlhahlobo ea tekheniki le forensics..
- Khaso e kenyelletsa khaso ea seea-le-moea le thelevishene, lipapatso tsa lipapali, litaba tsa sechaba, le ho feta.
- E loketse phetiso ea nako ea 'nete ea mohala oa litšoantšo tsa boleng bo holimo litoropong, leoatle, thaba, le libaka tse ling tse rarahaneng.
ga tlhaloso
UAV HDMI Wireless Video Transmitter
Modulation Mode | COFDM |
sebetsa gagamalo | DC11V~DC18V |
sebetsa Current | 1 Watts PA:≤1.7A DC12V; 2-Watts PA: ≤2.3A DC12V; 5-Watts PA: ≤3.0A DC12V |
Control Interface | Sebopeho se tloaelehileng sa RS232, 8 Lintlha tsa Bits, 1 Emisa Bit, Leha e le Parity, Sekhahla sa Baud: 19200 |
Transparent Data Interface | Phetiso ea tsela e le 'ngoe e pepeneneng ea serial port, 8 ya data likotoana, 1 setopong hanyane, tshehetsa makatsa parity, esita parity, parity ea waelese, sekhahla baud: 1200, 2400, 4800, 9600, 19200, 38400, 57600,230400 |
taetsitshireletso Method | 128-bit AES encryption |
Modulation Mapping | QPSK (4QAM), 16QAM, 64QAM |
Tsoela Pele Phoso Tokiso | 1/2 2/3 3/4 5/6 7/8 |
itebela hore karohano | 1/32 1/16 1/8 1/4 |
Nomoro ea thepa | 2K |
Maqhubu a Bandwidth | 2/3/4/5/6/7/8M fetolehang |
Phatlalatso ea Khoutu ea Phetiso | 2000kbs ~ 20000kbs e fetolehang |
Sehlahisoa sa Matla a Phetiso | 1 Li-Watts, 2 Li-Watts, 5 Li-Watts, 10 Li-Watts, 20 Li-Watts (Re ka u etsetsa tlhophiso) |
Khafetsa ea Phetiso | e ka etsoa ka nako efe kapa efe, maqhubu a ka lula a fetoha, mohato ona ke 1MHz |
Matla a Flatness | ka tlase ho 0.2dB sehlopheng sa 10MHz |
Sekhahla sa Mahetla | karo-karolelano e betere ho feta -30dB ha matla a tlhahiso e le 36dB |
Ea bobeli-Harmonic | ka tlase ho -60Db |
HO EKETSEHILENG | 32Db |
Video | 720 50P, 720 60P, 1080 24P, 1080 25P, 1080 30P, 1080 50P, 1080 60P |
Kenyeletso e Phahameng | HDMI 1080p |
Sebopeho sa Khoutu ea Video | Khoutu e bonolo e thehiloeng ho FPGA H.265 |
ho tšenyo ea nako | Sistimi ea phetisetso e lieha ho feta 30ms, ho dieha ho isa pheletsong |
Tšepe | bonyane, Anti-corrosion, moralo oa anti-vibration |
teba | 95*75*45limilimithara |
Weight | 0.248kg |
UAV HDMI Wireless Video Receiver
- Ha switjha e kaholimo e fetoleloa ho PC, data ea serial port e hlahisoa ho tsoa ho bofubelu ba kantle, tšoeu, le kgokelo e ntsho ya terata tse tharo, e ka hokelang komporong; ha e fetoleloa ho LCD, data ea serial port e hlahisoa skrineng sa LCD ho moamoheli.
- Phetoho e ka tlase ke sesebelisoa sa matla sa skrine sa LCD se tlang le moamoheli.
mokhoa oa ion | QPSK, 16QAM, 64QAM (boikhethelo) |
pele phoso khalemelo | 1/2, 2/3, 3/4, 5/6, 7/8 (boikhethelo) |
palo ea bajari | 2K, |
itebela hore karohano | 1/32, 1/16, 1/8, 1/4 (boikhethelo) |
Video decoding | H.265 |
aspect ratio | 4:3 16:9 |
setšoantšo sa video | 1080P@60P, 50P, 50ke, 30P, |
sebetsa gagamalo | AC220V/DC12V <0.9A |
Ho sebetsa mocheso | -20~ ~ + 50 ℃ |
Boholo ba chebahalo | 480*260* 45 (1U chassis) |
Sesebediswa Weight | 0.466kg |
se kathoko
FAQs
Moetso ona ke latency ea rona e tlase haholo bakeng sa transmitter ea video e se nang mohala ea drone le moamoheli.
E tšehetsa latency e tlase ea 28-millisecond. (Ha e kenyeletse khamera le nako ea ho beha leihlo)
COFDM-912T, Kenyeletso ea Video ea CVBS RCA 720P, 200~400 millisecond.
COFDM-908T: HDMI input, 200~300 millisecond.
Vcan1729: HDMI input, 20~40 millisecond. e loketseng drone.
The 1729 mohlala ke ultra-low latency, e loketseng haholo bakeng sa drones. E khona ho bona litšitiso ka nako, joalo ka matlo, lifate, lithapo, joalo-joalo, le ho li qoba ka nako e khutšoanyane. Lifeme tse ngata tsa drone Chaena li amohetse sistimi ena ea li-transceiver tsa video.
- Ka kopo hlokomela hore transmitter ena e tšehetsa feela HDMI 1080P kapa 720P input, ha e tšehetse ho kenya HDMI1080i kapa 720i.
- Bakeng sa ho fokotsa ho lieha ha latency, HDMI ha e kenyeletse lets'oao la Audio. Ke kopa o mpolelle haeba oa e hloka, Re tla etsa firmware e khethehileng bakeng sa taelo ea hau, empa tieho ea latency e tla ba telele ho feta HDMI e nang le lets'oao la video feela.
- Ka kopo hlokomela hore bakeng sa HDMI e sebelisoang ke khamera ea drone, Ka kopo sebelisa likhoele tse tšesaane haholo le tse thibelang tšitiso ea HDMI. Lithapo tse tloaelehileng tsa malapa a HDMI kapa lithapo tsa HDMI li ka baka liphoso tse neng li sa lebelloa.
-
What's the distinction between 1080p and 1080i?Litsamaiso tse peli tsa pontšo (1080E leq le 1080i) ka bobeli li ka bonts'a litšoantšo tsa 1920x1080 pixel, le hoja ba etsa joalo ka litsela tse fapaneng. Mangolo "batho + i" le "E leq" bua ka mokgwa oo ditshoantsho di hlahang ka ona. 1080ke emetse "sekeno se kopane" 'me 1080p ke ea "skena e tsoelang pele."
How to connect Vcan1729, HDMI Wireless Video Transmitter and Receiver
- Please connect the antenna first before you power on the transmitter and receiver, otherwise the Power Amplifier inside is easy to be burned.
- The parameter configuration board tool does not need to connect when you are testing.
- The power supply of the transmitter and receiver is better to use 12V 3A.
- There is two long receiver antennae and one short antenna for the transmitter. Although you do not need our transmitter antenna, please ensure that the transmitter antenna covers the frequency of 595Mhz. 595Mhz is the center working frequency.
- In the package, there is one HDMI. It is high-quality HDMI cable for drone or robot use.
- On the receiver, there are two switches on the side. (at the first time to test, please don’t move the switch and no need connect the UART cable to other devices)
PC-LCD: UART cable operate from the computer or LCD on the receiver, there is one LCD menu. If you put the CTRL switch on the LCD side, then the receiver parameter can be adjustable by menu, if you put the CTRL switch on the PC side, then the receiver parameter can be adjustable by computer, you need connect the UART cable to the computer.
LCD power: Off / ho, it can power on or off the small screen on the receiver, after change the receiver parameter, maybe you want to power off the screen displayer to save the power
- For testing, just connect the two receiver antenna on the RF1 and RF2, HDMI output to your HDMI monitor and give it power at 12V
- For testing, just connect the one transmitter on the RF, HDMI cable to connect to your HDMI camera, and give it power at 12V.
- Please contact us if you have any question, or show us the picture or video to us, we will offer you any further information.
Bukana ea Basebelisi
Boholo ba ho paka:127*27*12CM
Weight:8.5KG