Analog FPV Video Transmitter and Receiver AHD CVBS Camera input 100Mhz-3.3G frequency

Selelekela

This is a newly launched analog video transmission module.
It is a module with a small size, tšebeliso e tlase ea matla, and simple frequency matching.
This product processes analog video signals with continuously changing time (including space) and amplitude as a source and channel to meet the needs of different scenarios.

Feature

1. Multiple receivers can receive video signals at the same time\
2. tlaase latency, wide frequency, tšebeliso e tlase ea matla, low heat generation
3. Stable transmission efficiency
4. Simple frequency matching
5. Small boholo (TX: 48mm x 32mm) (script: 38limilimithara x 28 mm), tšebeliso e tlase ea matla
6. For simple frequency change, the starting frequency can be set through the serial port, le ea 4 frequency points can be cycled by pressing the button
7. High image quality and low signal interference rate

ga tlhaloso

1. Transmitter frequency range 100Mhz-3500Mhz (3.5G)
2. Receiver frequency range 100Mhz-3500Mhz (3.5G)
3. Default frequency range 400-900Mhz
4. Default power amplifier: 3-watt
5. Power supply 5V (not input 12V)
6. Mohloli oa ho kenya video: AHD / CVBS camera
7. Frequency selection method: one button (four frequency preset loops chosen)

LBH:

Q. Can you make the analog FPV transmitter and receiver have a relay/repeater?

A: This is an analog model, there is no relay or repeater in the middle. If you need a relay or repeater for your FPV transmission system, please check the below model, which uses the COFDM digital transmission system, it can have a repeater. 3W PA 50KM