535MHZ COFDM Wireless Audio Transmissor e receptor 1U 2U Uso no carro

Índice
Característica
- 535MHz ou 595mz, outras frequências são personalizadas. (170MHz ~ 860MHz Personalize suporte, Frequência de trabalho mais alta precisa adicionar o conversor de frequência no lado do receptor)
- A caixa de metal transmissor ou receptor é personalizada. (1U ou 2u ou outro tipo de design)
- Amplificador de 10W ou 20W embutido. Outros amplificadores de energia também podem ser personalizados de acordo com os requisitos do seu projeto.
- A configuração do projeto é personalizada de acordo com os requisitos do cliente, Com o transmissor de áudio sem fio de longo alcance montado no veículo instalado em um carro em movimento e o receptor instalado em um arranha-céu/torre fixo.
- A interface de entrada de áudio pode conectar diretamente um microfone.
- Mudança de um botão apenas entre áudio ou ambos os áudio + entrada de vídeo.
- The transmitter’s single transmitting antenna and the receiver’s two receiving antennas have built-in band-pass filters to shield clutter interference to or from other devices.
- The transmitter and receiver are equipped with audio output or output interface on the front and back for user convenience.
- V1/V2 switch button, apenas áudio / auditivo + video optional source on the transmitter.
Caixa de metal dentro


Configuração padrão TX RX
Acessório de conjunto completo

Precauções para uso
- Atenção: Please connect only one of 110~240V and 28V on the transmitter. Please connect only one of 110~240V and 12V on the receiver.
-
o DC power supply of the transmitter is 28V, 4UMA, and the receiver is powered by 12V.
-
o power switch on the front panel of the transmitter controls 110-240V AC. The DC power supply of the transmitter rear panel is connected to the car battery or battery for direct power supply. (28VDC has no power switch control)
-
The 110-240V and 28V of the transmitter cannot be powered at the same time, choose one of them.
-
A1/A2 on the front panel of the transmitter switches the front microphone input or the rear panel microphone input. Pressing the button is the microphone audio input of the front panel of the transmitter, connected to the built-in amplifier. For non-powered microphones.
-
Press A1/A2 on the front panel of the transmitter again for the microphone audio input of the rear panel of the transmitter, not connected to the built-in amplifier board. Suitable for powered microphones.
-
V1/V2 on the front panel of the transmitter switches audio or audio + entrada de vídeo. The transmitter CVBS has video transmission, and if you press it again, there is no video input, the video displays a white screen, and only sound is transmitted.
-
Because the microphone is mono, the microphone on the transmitter is used for right channel input by default, and the receiver audio output must also be connected to the right channel output. If your microphone is connected to the left channel, then the receiver also needs to be connected to the left channel audio output.
-
The transmitter front panel audio input and rear panel audio input cannot be used at the same time.
Perguntas frequentes
1. What is a 535MHz long-range COFDM wireless audio transmitter and receiver?
A 535MHz long-range COFDM wireless audio transmitter and receiver is a professional-grade system for stable, high-quality wireless audio transmission over long distances, commonly used in vehicles or mobile setups. It has a switch for audio only or video+audio wireless transmission.
2. What is the transmission range of this COFDM wireless audio system?
This 20WPA 20 watts power amplifier COFDM wireless audio system can achieve transmission ranges up to 1km to 3km on the ground depending on environmental conditions and antenna configurations.
3. Is this 535MHz COFDM audio transmitter suitable for in-car installations?
sim, a 1U and 2U rack-mounted designs are tailored for in-car use, providing robust wireless audio links while on the move.
4. What is the main frequency band of this wireless audio transmitter and receiver?
The primary operating frequency is 535MHz UHF band, suitable for long-distance, low-interference wireless audio transmission. Other frequency 170-860Mhz can be customized. Over 860Mhz, we have added a conversor para baixo de frequência on the receiver.
5. What is COFDM technology in wireless audio transmission?
COFDM (Multiplexação por divisão de frequência ortogonal codificada) ensures reliable audio transmission even in NLOS (Non-Line-of-Visão) and mobile conditions.
6.Can I use the 535MHz COFDM system for live event audio streaming?
sim, é ideal para live event audio, mobile production, and vehicle-based operations, ensuring stable and clear audio transmission.
7.What are the audio quality specifications of this COFDM transmitter?
ele suporta high-fidelity audio with low latency, Adequado para aplicativos profissionais de transmissão e comunicação.
8. Qual é a potência do transmissor de 535MHz cofdm?
Dependendo das demandas do seu projeto, normalmente oferece até 5W, 10W, 20W ou 50W Power de saída RF, Aumentando a distância de transmissão.
9. Que tipos de antenas posso usar com este transmissor e receptor?
Ambos antenas omnidirecionais e direcionais pode ser usado para otimizar a cobertura e o alcance. No transmissor, Oferecemos uma antena transmissora omnidirecional de fibra de vidro de 80 cm, on the receiver, Existem duas antenas receptores omnidirecionais de 180 cm. Veja a imagem completa do conjunto
10. É o sistema compatível com equipamentos de áudio profissional padrão?
sim, Ele suporta padrão Xlr (microfone) e interfaces de áudio RCA, Garantir ampla compatibilidade com mixers e gravadores de áudio.
11. Qual é a latência do sistema de áudio sem fio de 535MHz COFDM?
Apresenta latência ultrabaixa dentro 100-300 milissegundos, Adequado para aplicações em tempo real.
12. Este sistema pode transmitir sinais de áudio analógicos e digitais?
sim, pode transmitir sinais de áudio analógicos e digitais, fornecendo flexibilidade na integração.
13. O receptor COFDM de 535MHz exige uma fonte de alimentação especial?
O receptor normalmente opera em 12V ou 110 ~ 240V DC, Adequado para sistemas de energia de veículos.
14.É o fator de forma 1U ou 2U personalizável?
sim, Gabinetes e configurações personalizadas estão disponíveis para ajustar configurações específicas de carro ou estacionário.
15. É criptografia disponível para transmissão de áudio segura?
sim, o sistema pode integrar grau de distância opcional Para proteger os dados de áudio sobre o link sem fio. Você pode inserir sua senha definida por meio da ferramenta de configuração de parâmetros do transmissor.
16. Como o COFDM evita a interferência do sinal de áudio?
COFDM Modulação multi-transportadora e correção de erros minimize interference and signal dropouts in complex RF environments.
17. Can this wireless audio transmitter and receiver be used in emergency vehicles?
Absolutamente, it is perfect for carros de polícia, ambulâncias, and other emergency vehicles for secure audio links.
18. Is the system resistant to multipath interference?
sim, the COFDM modulation is inherently resistant to interferência multipercurso, maintaining audio integrity.
19. What is the weight of the 1U and 2U COFDM wireless audio units?
The weight varies, but typically the 1U receiver weighs around 3-4kg, e a 2U transmitter around 5-6kg.
20. Can the system be operated while the vehicle is moving?
sim, it is designed for mobile use, ensuring stable audio transmission even at high speeds.
21. What kind of maintenance does the COFDM wireless audio system require?
Requer minimal maintenance, primarily keeping connections clean and ensuring firmware is up to date.
22. Does the 535MHz system support duplex communication?
Não, it if simplex communication one-way transmission. Please choose other models to support duplex communication.
23. What input/output audio connectors are provided?
Usualmente, fornece balanced XLR, 3.5mm jacks, and RCA connectors for versatile connectivity. (personalizado)
24. Is this system compatible with COFDM video transmitters?
sim, there are V1/V2 switch button. Press it once, and it is a wireless audio transmitter. Press two times. It is a wireless audio / transmissor de vídeo.
25. What are typical applications for the 535MHz COFDM wireless audio system?
Applications include vehicle-to-vehicle communication, mobile news broadcasting, emergency services, e eventos ao vivo.
26. Can this system operate in dense urban environments?
sim, COFDM is well-suited for ambientes urbanos, com alta resistência à reflexão e bloqueio de sinal.
27. Que consumo de energia devo esperar?
O consumo de energia varia de 20W a 50W, Dependendo da potência de transmissão e das especificações do modelo.
28. Este produto está em conformidade com os padrões internacionais de RF?
sim, Ele está em conformidade com FCC, CE, e outros regulamentos regionais de RF.
29. Qual é a faixa de temperatura operacional típica?
Opera de maneira confiável entre -20° C a +80 ° C., ideal para uso no veículo ou ao ar livre.
30. Posso integrar este sistema em uma rede IP?
Alguns modelos oferecem Recursos de streaming IP via Ethernet, Para soluções analógicas/digitais híbridas.
31. É uma configuração remota suportada?
Existem um menu de ferramentas de configuração de parâmetro e tela no transmissor e na caixa de metal do receptor.
32. Qual é o número máximo de canais de áudio suportados?
Tipicamente, suporta um canal de áudio, Mas a personalização está disponível para mais.
33. Is it possible to customize frequency ranges?
sim, frequency ranges can be custom-tuned within the UHF band 170-860MHz, depending on regional regulations.
34. How secure is the audio transmission over 535MHz COFDM?
Com encryption and error correction, the transmission is secure against eavesdropping and signal loss.
35. How does the system handle signal dropouts?
Construídas em automatic re-sync and error correction ensures minimal impact during temporary signal loss.
36. Does the COFDM audio transmitter support GPS integration?
Não. It does not have any GPS function.
37. What’s the installation process in a vehicle?
Installation is straightforward: rack-mount the unit, connect power, antenas, and audio sources.
38. Can this system be used in maritime environments?
sim, with a proper antenna and power supply, it can be used on boats or ships. A sealed enclosure that is waterproof and moisture-proof may also be considered.
39. How does 535MHz frequency help in long-distance audio transmission?
o 535MHz UHF band offers a good balance of range and penetration, adequado para comunicação de longo alcance.
40. What’s the difference between 1U and 2U versions?
o 1U version is more compact, enquanto o 2U may include more features, higher power, or dual channels.
41. Is there a battery-powered version of this wireless audio system?
Tipicamente, these are vehicle-powered, mas custom battery solutions can be designed.
42. How long is the warranty for this product?
Most units come with a 1-year warranty, with extended options available. Lifetime free maintenance.
43. Can I use this system for private radio networks?
sim, é adequado para private audio communication networks with configurable frequencies.
44. What is the audio signal-to-noise ratio (SNR)?
It provides an SNR of over 70dB, ensuring clear audio quality.
45. Is there a way to monitor signal strength?
sim, the receiver feature signal strength indicators via LED or digital display. LOCKED means the signal is locked.
46. Can I upgrade the firmware of the COFDM system?
sim, firmware updates are provided for performance enhancements and new features.
47. What’s the shipping size and packaging?
Standard packaging includes secure foam-padded boxes, with dimensions varying by model.
48. Is the product resistant to vibration and shock?
sim, the chassis is designed to be rugged and vibration-resistant, perfect for vehicle use.
49. Can the 535MHz audio system be integrated with video monitoring systems?
sim, it can be integrated with sistemas de transmissão de vídeo sem fio for combined AV solutions.
50. Where can I buy the 535MHz COFDM wireless audio transmitter and receiver?
You can purchase directly from us, specialized RF communication equipment.



iVcan.com –
Eu tenho usado o 10 watts power amplifier 535MHz long-range COFDM wireless audio transmitter with video switch and the 1U receiver / 2U transmitter for in-car use, and I am very pleased with its performance. The system delivers strong, stable signals with excellent audio and video clarity, even over long distances. The COFDM technology ensures smooth transmission without interference or dropouts, which is very important for professional applications. The video switch function is convenient and makes operation flexible. A qualidade de construção é sólida, and installation in the vehicle was straightforward. Geral, this product is highly reliable and enhances in-car wireless communication and media transmission.