高清数字无线图传发射机ST220内置编码板、COFDM调制模块、小尺寸PA功率放大模块,整机采用CNC铝合金壳体,Tamanho pequeno,peso leve,传输分辨率高,发射距离远。

- COFDM调制。
- H265/H264视频编码,默认最高支持1080P/I @60fps。
- AES256加密。
- 支持非视距高速移动传输。
- 中心频点、largura de banda sem fio、传输码流等均可配置。



ST220主要技术规格
| interface | |
| 高清视频输入 | 标准HDMI接口 |
| 标清视频输入 | 4PIN 1.5mm间距连接器 |
| 单向透传数据串口 | 3PIN 1.5mm间距连接器,默认出货为TTL3.3V电平。也可出货时指定设置为标准RS232电平。 |
| 配置串口 | 4PIN 1.5mm间距连接器,TTL3.3V。可连接SconA/SconB/SconC配参面板,也可连接PC或其它上位机 |
| 电源输入 | XT30PW-M连接器 |
| Interface de antena | SMA外螺纹内孔 |
| 无线调制发射 | |
| 无线调制 | COFDM |
| IFFT模式 | 2K |
| largura de banda sem fio | 1MHz ~ 8 MHz ajustável,1Passo em KHz |
| FEC | 1/2, 2/3, 3/4, 5/6, 7/8 |
| intervalo de guarda | 1/32, 1/16, 1/8, 1/4 |
| constelação | QPSK, 16QAM, 64QAM |
| 无线码流 | 0.5Mbps a 31,67 Mbps |
| 工作频段 | 可选的工作频段: 300~360 MHz;350~ 400 MHz;450~ 500 MHz;520~560 MHz; 580~ 620 MHz;680~720 MHz;820~860 MHz。 200~860MHz之间的其它工作频段可定制。中心工作频点可配置,步进1KHz。 |
| Transmitir energia | 1W(30dBm)或2.5W(34dBm) |
| 音视频处理 | |
| 支持视频输入 | 默认单路视频输入编码发射:高清或标清。上电后自动检测视频输入。如果同时接入,设备默认首选HDMI输入,也可更改配置为首选AV输入。 可选双路视频输入同时编码发射。 |
| 支持的视频格式 | 1080@60P, 1080@50P, 1080@30P, 1080@25P, 1080@24P, 1080@60I, 1080@50I, 1080@30I, 720@60P, 720@50P, 720@30P, …… 720*480 60EU(NTSC), 720*576 50EU(AMIGO) |
| codificação de vídeo | H265或H264 |
| 音频输入 | HDMI嵌入式音频或模拟音频 |
| 音频格式 | AAC, 16pedaço, estéreo, 32Kbps |
| Método de criptografia | AES256 |
| tamanho | 104.5*50*27milímetros(不包括伸出的接口器件、外壳固定孔位) |
| peso | 小于140克 |
| 供电与功耗 | DC 12V供电(11~13V) 1W发射功率整机功耗小于15W,2.5W发射功率整机功耗小于23W。 |
ST220发射机可配套SR300接收机、SR110接收机、SR200接收机使用。ST220发射机与SR300接收机点对点无线传输H265视频时,视频延迟一般在200~300ms之间(未包含相机自身延迟)。ST220发射机搭配SR110接收机,H264低延时模式传输时,视频延迟一般在50~130ms之间(未包含相机自身延迟)。
ST220发射机接口信号
ST220发射机
AV输入接口:
标清输入接口,4Assento com passo PIN de 1,5 mm,音频支持Mic in或Line in输入(出厂时指定)。可通过配参面板设定PAL或NTSC制式。
| ALFINETE | ilustrar |
| AL | 音频输入左声道 |
| RA | 音频输入右声道 |
| GND | 信号地 |
| DE | 模拟视频输入 |
CFG接口:
配置串口(Control-uart),4Assento com passo PIN de 1,5 mm,Nível TTL 3,3 V。其中的5V信号用于对接配参面板时给配参面板供电。
Data接口:
单向透传数据串口(Data-uart),该串口数据会通过COFDM无线链路单向传输到对应接收机的数据串口上。3Assento com passo PIN de 1,5 mm,默认出货为TTL 3.3V电平,也可在出货时指定设置为标准RS232电平串口。
工作指示灯:
| 标识 | luz indicadora | ilustrar |
| P | LED de energia | 电源工作指示灯,红色,上电后常亮。 |
| T | LED de ligação | 无线发射指示灯,绿色,发射数据时闪烁 |











Visão geral
o ST220 HD Digital Wireless Image Transmission Transmitter é um compacto, high-performance device designed to deliver reliable wireless video transmission for professional applications. By integrating a built-in COFDM modulation module, um H.265/H.264 video encoding board, e um small-size PA power amplifier module, the ST220 achieves stable long-distance video transmission in a rugged, pacote leve.
The transmitter adopts a CNC aluminum alloy housing, ensuring durability, excellent heat dissipation, and lightweight design suitable for airborne applications. Com suporte para alta definição (alta definição) and standard-definition (SD) entradas de vídeo, configurable transmission parameters, and multiple frequency bands, the ST220 offers a flexible solution for drone operations, field broadcasting, vigilância, and other wireless video applications.
Paired with receivers such as the SR300, SR110, or SR200, the ST220 enables real-time video transmission with selectable latency modes. Depending on configuration, latency can be reduced to as low as 50–130ms for critical low-delay applications or maintained at 200–300ms in high-compression modes for bandwidth optimization.
Características principais
- Modulação COFDM: Garante robustez, stable transmission in both line-of-sight (LOS) and non-line-of-sight (NLOS) ambientes.
- Codificação de vídeo: Suporta H.265 (HEVC) ou H.264 (AVC) codificação, with default transmission up to 1080P/I @ 60 FPS.
- Encryption: Integrado Criptografia AES-256 guarantees secure video and data links.
- Flexible Video Input: Standard HDMI input for HD signals, and CVBS/analog input for SD video sources. Automatic input detection with HDMI preference, or configurable for AV priority. Optional dual-input encoding available.
- Transmissão Transparente de Dados: One-way transparent serial data channel (UART), configurable for TTL3.3V ou RS232 levels, enabling simultaneous data communication along with video.
- Customizable Frequency: Wide range of selectable frequency bands between 200–860 MHz, with configurable center frequency and fine-tuning step of 1 kHz.
- Transmission Power Options: Selecionável 1 W (30 dBm) ou 2.5 W (34 dBm) RF output for extended range.
- Suporte de áudio: Embedded HDMI audio or analog stereo audio input (Mic/Line-in selectable).
- Design robusto: CNC-machined aluminum shell provides heat dissipation, durabilidade, and compactness.
- Compactar & Leve: Tamanho 104.5 × 50 × 27 milímetros, weight less than 140 g, making it suitable for drone payloads.
- Parâmetros Configuráveis: Configurações de modulação (largura de banda, coding rate, constelação), frequência de trabalho, and FEC ratios are fully adjustable via configuration tools.
- Low Latency Modes: When paired with compatible receivers, latency can be as low as 50 EM, suitable for FPV, drone piloting, ou monitoramento em tempo real.
Especificações Técnicas
Wireless Modulation & Transmissão
- Modulação: COFDM
- Bandwidth: Ajustável de 1 MHz para 8 MHz
- constelação: QPSK, 16QAM, 64QAM
- FEC (Correção de erro de encaminhamento): 1/2, 2/3, 3/4, 5/6, 7/8
- Intervalo de guarda: 1/32, 1/16, 1/8, 1/4
- Configurable coding ratio: 2K
Frequência de trabalho
- Standard Bands:
- 300–360 MHz
- 350–400 MHz
- 450–500 MHz
- 520–560 MHz
- 580–620 MHz
- 680–720 MHz
- 820–860 MHz
- Personalização: Other frequencies from 200–860 MHz available upon request
- Step size: 1 kHz configurable center frequency
Transmitir energia
- 1 W (30 dBm) ou 2.5 W (34 dBm) selecionável
Vídeo & Processamento de áudio
- Video Inputs: HDMI (alta definição) e CVBS analog (SD)
- Supported Formats:
- 1080P/I @ 60/50 FPS
- 720P@ 60/50 FPS
- AMIGO (720×576 @ 50i)
- NTSC (720×480 @ 60i)
- Codificação de vídeo: H.265 / H.264
- Entrada de áudio: HDMI embedded or analog audio (Mic-in/Line-in selectable)
- Formato de áudio: AAC, 16-bit stereo
Interfaces
- Entrada HDMI: Standard HDMI port
- SD Video Input: 4-alfinete, 1.5 mm pitch connector
- Transparent Data UART: 3-alfinete, TTL3.3V (padrão), opcional RS232
- Configuration Port: 4-alfinete, TTL3.3V, compatible with parameter panel or PC connection
- Entrada de energia: Conector XT30PW-M (12V CC, 11–13V range)
- Antena: Conector SMA (macho, inner pin)
Indicadores
- LED de energia: Vermelho, always on when powered
- LED de ligação: Verde, blinks during wireless transmission activity
Poder & Consumo
- Tensão de alimentação: 12V CC (11–13V)
- Consumo:
- ≤15 W @ 1 Saída RF W
- ≤23 W @ 2.5 Saída RF W
Físico
- Tamanho: 104.5 × 50 × 27 milímetros (excluding connectors and mounting points)
- Peso: <140 g
Performance with Receivers
- ST220 + SR300 Receiver:
- Point-to-point H.265 transmission
- Typical latency: 200–300ms (excluding camera delay)
- ST220 + SR110 Receiver:
- Low-latency H.264 transmission mode
- Typical latency: 50–130ms (excluding camera delay)
- ST220 + SR200 Receiver:
- Standard COFDM reception with configurable settings
Aplicações
The ST220 HD digital wireless image transmission transmitter is designed for professional video transmission em ambientes exigentes. Its combination of compact design, high-resolution support, and configurable transmission options make it suitable for:
- Industrial & Commercial UAVs: Long-distance wireless video backhaul for drones in mapping, inspeção, e levantamento.
- Transmissão & Mídia: Wireless camera links for live events, esportes, and news gathering.
- Segurança & Aplicação da lei: Mobile video transmission for surveillance vehicles, operações de campo, or public safety drones.
- Pesquisa & Operações de resgate: Reliable video feeds in disaster zones or remote areas.
- Defesa & Reconhecimento: Tactical UAV or ground unit video transmission with secure AES-256 encryption.
Configurações opcionais
- Bandas de frequência: Customizable bands from 200–860 MHz.
- Porta de dados: Configurable as TTL (padrão) ou RS232.
- Video Input Priority: HDMI ou AV (factory-configurable).
- Dual-Video Input Mode: Optional dual-input encoding and transmission.
- Transmitir energia: 1 W (baixa potência) ou 2.5 W (alta potência).
- Compatibilidade do receptor: Compatible with SR110, SR200, SR300 models depending on latency and resolution needs.

Faça uma pergunta
Sua mensagem foi enviada