6-7GHz 5W FPV VTX Power Amplifier Manual

Visão geral

The 6110MHz–7210MHz 6-7GHz FPV VTX 3W Power Amplifier is a high-performance video transmission solution designed for professional FPV drone applications, long-range UAV flights, and industrial UAV video systems. Covering the 6–7GHz frequency band, ele fornece 64 selectable channels and adjustable power output from 25mW to 3W, allowing pilots to tailor transmission strength to their flight needs. With lightweight construction (25.85g), dimensões compactas (53mm x 28,85 mm x 16 mm), and robust aluminum heat sink with an active cooling fan, the VTX ensures stable operation even in high-power, long-duration flights.

The module is compatible with standard FPV receivers operating in the 6–7GHz band and supports IRC Tramp protocol for remote configuration through compatible flight controllers. It also includes features like PIT mode for safe indoor testing, automatic overheat protection, and multiple frequency bands for flexible channel selection.

This VTX is ideal for FPV racing, freestyle flying, professional UAV surveys, and any scenario where high-quality, reliable video transmission is required over medium to long distances.

---

Características

1. Ampla cobertura de frequência: Operates across 6110MHz–7210MHz, covering the full 6–7GHz FPV band with 64 canais selecionáveis.
2. Adjustable Output Power: Switch between 25mW, 1000mW, e 3000mW (3W) to suit short-range or long-range transmission requirements.
3. Compactar & Leve: Only 25.85g, 53mm x 28,85 mm x 16 mm, easily mountable on drones, aeronave de asa fixa, e UAVs.
4. Efficient Cooling System: Aluminum alloy heat sink combined with a quiet active fan for stable operation.
5. Múltiplas Bandas de Frequência: Suporta 8 bandas de frequência (UMA, B, E, F, R, P, H, Você) for flexible channel management and interference avoidance.
6. IRC Tramp Protocol Support: Allows remote VTX configuration through compatible flight controllers.
7. Modo PIT: Low-power mode for safe bench testing and indoor use.
8. Overheat Protection: Automatically reduces output power if temperature exceeds 100°C and restores when cooled below 95°C.
9. Standard SMA Connector: Compatible with most FPV antennas.
10. Versatile Power Input: Supports 7V–36V DC (2S–8S LiPo battery) for different drone platforms.
11. Indicadores LED: Red LED for frequency, blue LED for band, green LED for power. Easy visual feedback for settings.
12. Mounting Compatibility: 20mm x 20mm mounting holes, suitable for racing drone frames and UAV installations.

---

Especificações Técnicas

Parâmetro	Especificação
Alcance de frequência	6110–7210MHz (6–7GHz)
Frequency Points	64 canais
Frequency Bands	UMA, B, E, F, R, P, H, Você
Maximum Power Output	3W (25mW / 1000mW / 3000mW ajustável)
Tensão de entrada	DC 7–36V (2S–8S LiPo support)
Conector de antena	AME feminina
Communication Protocol	Vagabundo IRC
Método de resfriamento	Aluminum heat sink + active fan
Dimensões	53 x 28.85 x 16 milímetros
Peso	25.85g
Orifícios de montagem	20 x 20mm, Ø2mm
Special Modes	Modo PIT (baixo consumo de energia)
Overheat Protection	Power reduction above 100°C, resume at 95°C

---

Opções personalizáveis

1. Alcance de frequência: Optionally configurable bands such as 1.2GHz, 2.4GHz, 5.8GHz to meet local regulations or project requirements.
2. Potência de saída: Adjustable power levels (25mW–5W or higher for custom designs).
3. Tipo de modulação: Analógico, COFDM, DVB-T, or proprietary digital protocols.
4. Interface de vídeo: HDMI, IDE, CVBS, or IP stream input for different UAV setups.
5. Audio/Data Channels: Optional additional audio input or telemetry channel.
6. Fator de forma & Tamanho: Board-level, fechado, or ultra-light compact versions.
7. Faixa de fonte de alimentação: Custom voltage ranges depending on drone system requirements.
8. Antenna Connector Options: grau, RP-SMA, MMCX, or custom connectors.
9. Encryption: AES or proprietary encryption for secure transmission.
10. Método de resfriamento: Passive or active cooling depending on output power.
11. Número do canal & Troca: Fixed channels, Interruptor DIP, or software-controlled frequency selection.
12. Habitação & Proteção: À prova de intempéries, ruggedized, or dustproof enclosures.
13. Marca & Firmware: OEM/ODM customization for logos and firmware options.

---

Perguntas frequentes