AV over IP-video-encoder 2090 Veelgestelde vragen – gebruikersinterface van de R380-spelerAV over IP-video-encoder 2090 Veelgestelde vragen – R380-speler UI op afstand bekijken
Inhoudsopgave
Ondersteunt de R380 Player videoweergave op meerdere schermen of gelijktijdig??
Bij R380-speler, het kan hier worden ingesteld.
Q: I need to connect to the LTE web UI to set up the required APN. My SIM uses a private APN and does not provide public Internet access, but it assigns a local IP address. I want to access this local IP to establish an RTSP stream from my office to a remote encoder over a 4G LTE connection. Is this supported?
Op dit moment, this use case is not fully supported in the current firmware. APN Configuration Limitation The current firmware does not support direct user configuration of the APN through the LTE web UI or the 4G module interface. Current System Behavior In the existing design, the APN settings are managed by the main SoC, which handles the dial-up process. Als resultaat, APN configuration must be performed through our encoder module rather than directly on the LTE module itself. Network Access Consideration In your scenario, since the SIM uses a private APN without Internet access and only provides a local IP, accessing the device (Bijv., for RTSP streaming) depends on the operator’s private network routing. This requires proper APN configuration and network-side support to enable end-to-end connectivity. Planned Improvement Our engineering team is evaluating a firmware update to add user-configurable APN support. This enhancement will provide more flexibility for private network deployments such as yours. The estimated development timeline is approximately7–10 days.
10 stuks encoder analoog naar digitaal converter
Q: How do I enable the TF card auto recording function?
EEN:To enable TF card auto recording, please log in to the device’sWeb Configuration Interfaceand manually configure the recording settings.
You can follow these steps:
Open the device Web UI in your browser.
Ga naar instellingen of Storage Configuration.
Find theOpname op TF-kaart keuze.
Enable or disable TF card recording as needed.
Check the TF card status and capacity information:
Confirm whether the TF card is detected correctly.
Verify the available storage capacity.
Check if the TF card status showsLeesbaar of Unformatted.
If the TF card is shown asUnformatted, please format the card before enabling recording.
Notitie:It is recommended to use a compatible, high-speed TF card for stable recording performance.
enable recording on tf card of cvbs to ip encoder board
check TF card size to see enable recording setting ok or not
Ondersteunt CMOS + USB thermische camera-opname, codering en RTSP-streaming; lokale CVBS/HDMI-uitgang; schakelbare weergavemodi
Massaproductie
Voor aangepaste video-ingang/uitgang-conversie-oplossingen die niet in onze producten zijn vermeld, Neem contact met ons op voor OEM/ODM-ondersteuning. Op basis van uw wensen kunnen wij op maat gemaakte producten ontwikkelen.
Een vraag stellen
Bedankt voor je reactie. ✨