How to burn your own firmware to the RV1126 AI IPC camera

The first burning needs to use DriverAssistant to install the driver.

ສາລະບານ

There are three ways to enter the burning mode:

After entering the system, run the reboot loader, and automatically enter the loader mode after restarting

Uboot：

After powering on, quickly press Ctrl + C to interrupt the Uboot startup, and then type the download command.

Power off, use tweezers to short the two points in the red circle above, and power on

Open RKDev_Tool, ແລະມັນຈະສະແດງ “found a Maskrom device” ຫຼື “found a Loader device”:

Select “ຍົກລະດັບ Firmware”:

Click on “ເຟີມແວ”:

A file selection dialog window pops up, select update.IMG, it may be stuck for a few seconds to load the firmware.

Then click upgrade:

You can see that the log on the right starts to show the burning process.