30Km long distance COFDM HDMI Wireless Video Transmitter FAQ
30Km long distance COFDM HDMI Wireless Video Transmitter Receiver Full Set Audio Video TX RX for UAV Drone 1080P 908T
30-150Km ໄລຍະໄກ COFDM HDMI Transmitter Wireless Video Transmitter ລະບົບສາຍສົ່ງວິດີໂອຮັບເຕັມຊຸດສຽງວິດີໂອ TX RX ສໍາລັບ UAV Drone UGV 1080P
ຄຸນນະສົມບັດ
- ປະສົມປະສານສູງ, ການອອກແບບລວມກັນແບບໂມດູນ
- ການ ນຳ ໃຊ້ເຕັກໂນໂລຍີການປັບປ່ຽນ COFDM, H.264 image coding technology
- ມັນສາມາດສົ່ງຫນຶ່ງຊ່ອງຂອງ 1080P HDMI (SDI ທາງເລືອກ) ສັນຍານ
- ການຊັກຊ້າຕ່ໍາ, the minimum end-to-end delay is 200~250 milliseconds, We also have a super-lower latency model of less than 30-50 milliseconds.
- ທັງຫມົດຕະຫຼອດການສື່ສານ, ຄວາມຢ້ານກົວຂອງການສ້າງກໍາແພງ
- ການສື່ສານຄວາມໄວສູງລະຫວ່າງການເດີນທາງ, the maximum moving speed can reach 600 km / ຊົ່ວໂມງ.
- ກະເປົາໄຟຄວາມຮ້ອນປະເພດອາລູມິນຽມ, ກັນສັ່ນ, Waterproof case is optional.
- ຮອງຮັບ LOS ແລະບໍ່ແມ່ນສາຍຂອງສາຍຕາ (NLOS) ການສົ່ງຜ່ານມືຖື
- ໄລຍະຫ່າງແມ່ນບໍ່ຫນ້ອຍກວ່າ 30 ກິໂລແມັດພາຍໃຕ້ເງື່ອນໄຂຂອງສາຍຕາ ( Power amplifier and distance: 2 Watts PA 30km, 5 Watts PA 60KM, 10 Watts PA 100km, 20 Watts 150km at LOS)
- ການຮັບສັນຍານສຽງແລະວີດີໂອທີ່ປະສານສົມທົບກັນ, ຄວາມລະອຽດສູງ HDMI1080P ຫຼາຍຮູບແບບ, ຄຸນນະພາບຮູບພາບດີວີດີມາດຕະຖານ
- ເຄື່ອງຮັບສາມາດຮັບຮູ້ການບັນທຶກວິດີໂອແລະ ໜ້າ ທີ່ ສຳ ຮອງ
- 128-ການເຂົ້າລະຫັດແລະການຖອດລະຫັດ AES bit
- ມີການປັບແຕ່ງເຕັມຮູບແບບ
- Upgrade tool: Parameter Configure board
- ການນໍາໃຊ້: UAV, ພາຫະນະ & UGV
- Modulation: COFDM
- ແຮງດັນເຮັດວຽກ: DC11V-DC13V
- ໃນປະຈຸບັນເຮັດວຽກ: 0.5~ 2W (ຂຶ້ນກັບ PA ທີ່ແຕກຕ່າງກັນ)
- ພະລັງງານສາຍສົ່ງ: 0.5W~20W optional
ສາລະບານ
ຄໍາຮ້ອງສະຫມັກ
ຜະລິດຕະພັນນີ້ສ່ວນໃຫຍ່ແມ່ນໃຊ້ເຂົ້າໃນການກວດສອບທາງວິຊາການແລະການເກັບ ກຳ ຂໍ້ມູນຫຼັກຖານຂອງພະແນກກວດກາຄວາມປອດໄພແລະຄວາມປອດໄພສາທາລະນະ, ການສົ່ງຕໍ່ພາບໂດຍກົງຂອງຍານພາຫະນະທາງອາກາດທີ່ບໍ່ມີຄົນຂັບ, ເຮືອທີ່ບໍ່ມີຄົນຂັບ, ການຖ່າຍທອດທາງວິທະຍຸແລະໂທລະພາບ, ວິທະຍຸແລະໂທລະພາບອອກອາກາດສົດ: ພາກສະຫນາມອອກອາກາດ, ການອອກອາກາດກິລາ, ຂ່າວສັງຄົມ, ອາກາດສົດ, ສະຕູດິໂອ, ແບບເລັ່ງລັດເນີນພູ, ແລະດ້ານອື່ນໆ. ມັນ ເໝາະ ສົມກັບການຖ່າຍທອດແບບມືຖືໃນເວລາຈິງຂອງພາບທີ່ມີຄຸນນະພາບສູງໃນສະພາບແວດລ້ອມທີ່ສັບສົນຕ່າງໆເຊັ່ນ: ເຂດຕົວເມືອງ, ທະເລ, ແລະພູເຂົາ.
ເຄື່ອງສົ່ງສັນຍານສະເພາະ
ວິທີການແກ້ໄຂ | COFDM |
ແຮງດັນໄຟຟ້າທີ່ເຮັດວຽກ | DC11V ~ DC13V |
ປະຈຸບັນເຮັດວຽກ | 0.5 ວັດ: ≤0.6A DC12V, 1 ວັດ: ≤0.8A DC12V, 2 ວັດ: ≤1.5A DC12V 5 ວັດ: ≤3.0A DC12V 10 ວັດ: ≤5.0A DC12V 20 ວັດ: ≤7.0A DC12V |
ອິນເຕີເຟດຄວບຄຸມ | ອິນເຕີເຟດ RS232 ມາດຕະຖານ, 8 ຖານຂໍ້ມູນ, 1 ສBit ເທິງສຸດ, Parity Bit, ອັດຕາ Baud: 19200 |
ການໂຕ້ຕອບຂໍ້ມູນທີ່ໂປ່ງໃສ, | ລະບົບສາຍສົ່ງທີ່ Port ໂປ່ງໃສແບບ ໜຶ່ງ ເສັ້ນທາງທີ່ໂປ່ງໃສ, 8 ຖານຂໍ້ມູນ, 1 ຢຸດບິດ, ສະຫນັບສະຫນູນ Parity ຄີກ, Parity Bit, ລະບົບ Wireless Parity, ອັດຕາ Baud: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 |
ວິທີການເຂົ້າລະຫັດ | ສະຫນັບສະຫນູນການເຂົ້າລະຫັດ 128 ບິດ |
ການສ້າງແຜນທີ່ແບບໂມດູນ | QPSK (4QAM), 16QAM, 64QAM |
ການແກ້ໄຂຄວາມຜິດພາດຕໍ່ | 1/2 2/3 3/4 5/6 7/ 8 |
ໄລຍະຫ່າງກອງ | 1/32 1/16 1/8 1/4 |
ເບີບັນທຸກ | 2K |
ວາງຂອງສັນຍານຄວາມຖີ່ | 2 / 3 / 4 / 5 / 6 / 7 / 8M ປັບໄດ້ |
ລະຫັດສາຍສົ່ງ | 2000kbs ~ 20000kbs ປັບໄດ້ |
ສົ່ງພະລັງງານ | 0.5 / 1 / 2 / 5 / 10 ວັດ |
ຄວາມຖີ່ຂອງການສົ່ງ | ທຸກຄວາມຖີ່ສາມາດປັບແຕ່ງໄດ້, ຂັ້ນຕອນທີ 1MHz |
ຄວາມຮາບພຽງຂອງພະລັງງານ | bandless ພາຍໃນ 10MHz ກ່ວາ 0.2dB |
ອັດຕາສ່ວນຂອງບ່າ | ພະລັງງານຜົນຜະລິດຂອງ 27dB, ອັດຕາສ່ວນຂອງບ່າແມ່ນດີກ່ວາ -30dB |
ປະສົມກົມກຽວທີສອງ | ≤ -45dB |
ເພີ່ມເຕີມ | 32ດ |
ວິດີໂອວັດສະດຸປ້ອນ | 720×480 60ຂ້າພະເຈົ້າ(NTSC), 720×576 50ຂ້າພະເຈົ້າ(PAL), 720 50P, 720 60P, 1080 50ຂ້າພະເຈົ້າ, 1080 60ຂ້າພະເຈົ້າ, 1080 24P, 1080 25P, 1080 30P, 1080 50P, ຮູບແບບຕ່າງໆແມ່ນສາມາດປັບຕົວໄດ້. |
ການໂຕ້ຕອບ HD | HDMI, SDI ທາງເລືອກ |
ຮູບແບບການເຂົ້າລະຫັດວິດີໂອ | H.264 |
ມາດຕະຖານການປົກປ້ອງ | ເຄື່ອງປະດັບປະດາລັງສີອາລູມິນຽມທຸກປະເພດ, ຕ້ານ corrosion, ການອອກແບບຊ-ອກຫຼັກຖານ |
ຂະຫນາດທັງຫມົດ | 9 x 6.4 x 2.3 ຊັງຕີແມັດ |
ນ້ ຳ ໜັກ ລວມ | ≤0.20KG |
ລາຍລະອຽດຂອງຜູ້ຮັບ
ຕົວກໍານົດການຮັບ HD bandwidth ຫຼາຍເຄື່ອງແບບ Rack | |
ຮັບຊ່ວງຄວາມຖີ່ | 170-860MHz VHF&UHF |
ແບນວິດຄວາມຖີ່ | 2/3/4/5/6/7/8MHz, ທາງເລືອກ |
ລະດັບການປ້ອນຂໍ້ມູນ RF | -94dBm ~ -15dBm (8ວາງຂອງສັນຍານ M)/-98dBm ~ -15dBm (2ວາງຂອງສັນຍານ M) |
ຄວາມຕ້ານທານຂອງວັດສະດຸປ້ອນ RF | 50 ohms |
ຕໍ່ການປ້ອນຂໍ້ມູນ RF | N- ຫົວ |
ແບບ demodulation | COFDM |
ຮູບແບບດາວ | QPSK, 16QAM, 64QAM (ທາງເລືອກ) |
ການແກ້ໄຂຄວາມຜິດພາດຕໍ່ | 1/2, 2/3, 3/4, 5 /6,7/8 (ທາງເລືອກ) |
ເບີບັນທຸກ | 2k, |
ໄລຍະຫ່າງກອງ | 1/32, 1/16, 1/8, 1/4 (ທາງເລືອກ) |
ການຖອດລະຫັດວິດີໂອ | MPEG-2MP@ML/H.264 |
ອັດຕາສ່ວນ | 4: 3 16: 9 |
ຮູບພາບວິດີໂອແມ່ນ | 720 * 576 @ 8MHz 1080P @ 60P |
ຮູບແບບຜົນຜະລິດສຽງ | stereo ບໍ່ສົມດຸນ 300 / 200mv |
ຜົນຜະລິດສຽງ | output2Audio + 2ຜົນຜະລິດວິດີໂອ |
ແຮງດັນປະຕິບັດການ | AC220V / DC12V <0.5A |
ອຸນຫະພູມປະຕິບັດການ | – 20℃ ~ + 50 ℃ |
ຂະ ໜາດ ຮູບລັກສະນະ | 480*260*45 (1ອູ) ພວງມະໄລ |
ນ້ ຳ ໜັກ ອຸປະກອນ | 1.5ກິໂລກຣາມ (ພາສາສອງທາງ 2.5Kg) |
ຫມາຍເຫດ: ຕົວເຊື່ອມຕໍ່ເລີ່ມຕົ້ນແມ່ນ HDMI, ຖ້າທ່ານຕ້ອງການຕົວແບບທີ່ລາຄາຖືກກວ່າ, ຕົວເຊື່ອມຕໍ່ ສຳ ລັບ CVBS ສີເຊື່ອມຕໍ່ HD HD 720p, ກະລຸນາ ກວດເບິ່ງທີ່ນີ້ ສໍາລັບຮູບແບບອື່ນ.
ຄໍາອະທິບາຍ:
– ອຸປະກອນນີ້ຮັບຮອງເອົາເຕັກໂນໂລຢີ COFDM, ເຊິ່ງລວມເສົາອາກາດສົ່ງ, ໂມດູນດິຈິຕອນ, ສຽງ, ແລະຟັງຊັນວິດີໂອ.
– ຂະ ໜາດ ກະທັດຮັດ, ຄວາມຮ້ອນຂະຫນາດນ້ອຍ, ແລະລະບົບສາຍສົ່ງຍາວ
– ເຫມາະສົມກັບກ້ອງຖ່າຍຮູບຂະຫນາດນ້ອຍ, ສາມາດເຮັດໃຫ້ການຖ່າຍພາບແລະສົ່ງຜ່ານພາບ HD
– ໄລຍະການສົ່ງຕໍ່ຈະຍາວກວ່າຖ້າມັນຮັບເອົາເສົາອາກາດສູງ
– ຊ່ວງສົ່ງໄຟຟ້າ: 5000m (ໂດຍບໍ່ມີການຂັດຂວາງໃດໆ)/500M ກັບອຸປະສັກຂັດຂວາງ
ຄຸນລັກສະນະ:
– ຂະ ໜາດ ກະທັດຮັດ, ການອອກແບບໂມດູນ
– ຮັບຮອງເອົາເຕັກໂນໂລຍີການປັບປ່ຽນ COFDM, ເຕັກໂນໂລຢີການບີບອັດຮູບພາບ MPEG-2
– ການສື່ສານແບບ Omnidirectional
– ການສື່ສານຄວາມໄວສູງຊ່ວຍໃຫ້ມີການສົ່ງສັນຍານສຽງແລະວິດີໂອໃນເວລາຈິງ
– ກໍລະນີອາລູມິນຽມທີ່ທົນທານຕໍ່ການຕົກຕະລຶງ
– ລະບົບສາຍສົ່ງ NLOS
ຂໍ້ມູນຈໍາເພາະ:
ຕົວສົ່ງສັນຍານ:
– ຂະຫນາດ:90x64x23 ມມ
– ນ້ໍາຫນັກ:200g
– ເສົາອາກາດ:22mm
ຮັບ
– ຂະຫນາດ: 87x70x20mm
– ນ້ໍາຫນັກ:200g
– ລະດັບຄວາມສູງຂອງເສົາອາກາດ:42.5ຊັງຕີແມັດ (ສາມາດງໍໄດ້)
ສະເພາະດ້ານວິຊາການ
– Modulation: COFDM
– ແຮງດັນໄຟຟ້າທີ່ເຮັດວຽກ: DC11V-DC13V
– ໃນປະຈຸບັນເຮັດວຽກ:0.5W: ຫນ້ອຍກ່ວາ 0.6A @ DC12V
– port ຄວບຄຸມ: ທີ່ Port standrad RS232. 8-ບິດຂໍ້ມູນບິດ, 1-bit ຢຸດ bit, ອັດຕາບອດ:19200, ສະຫນັບສະຫນູນການກວດສອບ parity ຄີກ
– ພອດຂໍ້ມູນສົ່ງ:8 ບິດຂໍ້ມູນບິດ,1 bit ຢຸດ bit, ອັດຕາບອດ,1200,2400,4800,9600,19200,38400,57600,115200,230400
– ການເຂົ້າລະຫັດ: ສະຫນັບສະຫນູນ 128 ການເຂົ້າລະຫັດ
– ແຜນທີ່ modulation: QPSK (4QAM),16QAM,64QQAM
– ການແກ້ໄຂຄວາມຜິດພາດຕໍ່: 1/2,2/3,3/4,5/6,7/8
– ປົກປ້ອງໄລຍະຫ່າງ: 1/32,1/16,1/8,1/4
– ເບີບັນທຸກ:2K
– ວາງຂອງສັນຍານຄວາມຖີ່:2/3/4/5/6/7/8M ປັບໄດ້
– ກະແສການຂົນສົ່ງ:2000kbs-20000kbs ປັບໄດ້
– ພະລັງງານສົ່ງໄຟຟ້າ: 2W
– ຄວາມຖີ່ຂອງການສົ່ງ: ສາມາດໄດ້ຮັບການລູກຄ້າ, ຂັ້ນຕອນແມ່ນ 1Mhz
– ແບນພະລັງງານ: ຫນ້ອຍກວ່າ 0.2db ພາຍໃນ 10Mhz
– ຄວາມກົມກຽວກັນສອງ: ຫນ້ອຍກວ່າ -45db
– ເພີ່ມເຕີມ:32ຖານຂໍ້ມູນ
– ວິດີໂອວັດສະດຸປ້ອນ:1Vp-p,75ohm
– ຮູບແບບໂປຼແກຼມວິດີໂອ: MPEG-2
– ຄຸນນະພາບວິດີໂອ: 720×576 ເມື່ອຢູ່ຂ້າງເທິງ 4M
– ຮູບແບບ: NTSC ແລະ PAL ສາມາດຖືກຕັ້ງ
ໄດ້ຮັບການ ກຳ ນົດທາງວິຊາການ:
– ລະດັບຄວາມຖີ່ຂອງຜູ້ຮັບ: 170-860Mhz, VHF ແລະ UHF
– ວາງຂອງສັນຍານຄວາມຖີ່: 2/3/4/5/6/7/8 Mhz, ປັບ
– ລະດັບການປ້ອນຂໍ້ມູນ RF:-94dBm-0dbm ທີ່ 8M / -98dbm-0dbm ທີ່ 2M
– ຄວາມຕ້ານທານຂອງວັດສະດຸປ້ອນ RF: 50ohm
– ພອດວັດສະດຸປ້ອນ RF: ໂຮງຮຽນສູງ
– ໂມດູນ: COFDM
– ວິທີການດາວ: QPSK,16QAM,64ທາງເລືອກ QAM
– ການແກ້ໄຂຄວາມຜິດພາດຕໍ່: 1/2,2/3,3/4,5/6,7/8 ທາງເລືອກ
– ເບີບັນທຸກ:2K
– ຊ່ອງຫວ່າງການປ້ອງກັນ:1/32,1/16,1/8,1/4
– ອັດຕາການຈໍ:4:3,16:9
– ຮູບພາບວິດີໂອ:720×576 @ 6Mhz
– ພອດຜົນຜະລິດສຽງແລະວິດີໂອ: ມາດຕະຖານ 3.5 ພອດ
– ແຮງດັນເຮັດວຽກ: DC12V 0.3A
ຊຸດລວມ:
– 1 x ເຄື່ອງສົ່ງສັນຍານ
– 1 x ຜູ້ຮັບ
– 1 ຕັ້ງຄ່າອຸປະກອນເສີມ x
30Km long distance COFDM HDMI Wireless Video Transmitter
FAQ
ຄໍາຖາມ 1: ຂ້າພະເຈົ້າຕ້ອງການຢ່າງຫນ້ອຍ 30 ກິໂລແມັດຈາກອາກາດໄປຫາດິນສໍາລັບ UAV UGV USV.
ຄໍາຕອບ 1:ລະບົບຂອງພວກເຮົາສະ ໜັບ ສະ ໜູນ ມັນ, ມັນຄວນຈະໃຊ້ເຄື່ອງຂະຫຍາຍສຽງ 2W, ມັນດີກວ່າທີ່ຈະໃຊ້ເສົາອາກາດເຄື່ອງສົ່ງສັນຍານຍາວພິເສດ ແລະສອງເສົາອາກາດຮັບທີ່ສູງກວ່າ.
COFDM-912T VS COFDM-908T
ຄໍາຖາມ 2: ຂ້ອຍສາມາດໄປໄດ້ໄກປານໃດຖ້າຂ້ອຍໃຊ້ເຄື່ອງສົ່ງແລະເຄື່ອງຮັບທັງຢູ່ເທິງພື້ນດິນ?
ຄໍາຕອບ: ໃນການນໍາໃຊ້ພື້ນທີ່, ເຄື່ອງສົ່ງແລະເຄື່ອງຮັບຕ້ອງມີຄວາມແຕກຕ່າງລະດັບຄວາມສູງທີ່ແນ່ນອນເພື່ອສົ່ງທາງໄກ.
ໄລຍະທາງຍາວທີ່ສຸດແມ່ນພຽງແຕ່ 2.5 ກິໂລແມັດຖ້າເຄື່ອງສົ່ງແລະເຄື່ອງຮັບມີຄວາມສູງດຽວກັນຢູ່ເທິງພື້ນດິນ. ກະລຸນາເບິ່ງວິດີໂອການທົດສອບຂອງພວກເຮົາ; ເນື່ອງຈາກວ່າເຄື່ອງສົ່ງແລະເຄື່ອງຮັບແມ່ນຖືກຈັດໃສ່ໃນລະດັບທີ່ແຕກຕ່າງກັນ, ເບື້ອງໜຶ່ງແມ່ນຢູ່ເທິງພູ, ອີກດ້ານໜຶ່ງແມ່ນຢູ່ແຄມທະເລ, ພວກເຮົາໃຊ້ຄ່າເລີ່ມຕົ້ນສອງວັດເພື່ອສົ່ງ 27 ກິໂລແມັດ.
ຄໍາຖາມ 3: ມັນສະຫນັບສະຫນູນສະພາບແວດລ້ອມການເຮັດວຽກຂອງ -20 ອົງ?
ຄໍາຕອບ: Yes, ສະຫນັບສະຫນຸນ
ຄໍາຖາມ 4: I want to buy modules and built-in my devices, please tell me the dimension of that modules.
ຄໍາຕອບ: SD model: 6X7X1.6cm, HD model: 5X7X1.6cm
ຄໍາຖາມ 5:Do you have any special case shells for marine use?
ຄໍາຕອບ: Yes, ກະລຸນາກວດເບິ່ງຮູບຂ້າງລຸ່ມນີ້. (For the transmitter with a three-proof shell, ກັນນ້ໍາ, ກັນສັ່ນ, anti-salt spray, 防水,防震,防盐雾)
ຂໍ້ຄວນລະວັງສໍາລັບການປັບແຕ່ງຄໍາສັ່ງ
- ຄວາມຖີ່ຂອງການ: Please tell me what frequency you need as the default center frequency. Please choose from 170-860Mhz.
- ຄວາມຍາວ Antenna: Please tell us the length you want for the 1-piece transmitter and 2-piece receiver antenna. (receiver antenna length has 0.8 ຫຼື 1.8 meters optional)
- Antenna type:
According to your application scenario, the wireless video transmitter be placed on the drone or on the ground, or on the vehicle? Select different transmit antennas for transmitter and receiver antennas.
The transmitter of the UAV uses a short omnidirectional antenna as much as possible. The transmitter antenna installed on the ground or on the vehicle should be as long as possible, and it can be installed higher to avoid other obstacles on the ground. The receiver is generally used on the ground, try to choose a longer receiver antenna. If it is fixed in one place, a directional antenna can also be used. For more antenna types, please refer to https://ivcan.com/price-list-for-wireless-video-transmitter-and-receiver-antenna/.
FAQs
Q. What is the video resolution?
A: HDMI 1080P.
Q. Does the transmitter power current is high?
A: ສໍາລັບ ຕົວສົ່ງສັນຍານ, the different PA (ເຄື່ອງຂະຫຍາຍສຽງພະລັງງານ) ພາຍໃນ, the current is different. 20W 6-7A, 10W 5A, 5W 3A, 1-2W 1.6A
ສໍາລັບ ຮັບ, the current is only 0.3A (300mA)
Q: Like we only need 10km, how much PA is recommended?
A: Considering that your transmitter and receiver are used on the ground, unlike drones, the heights of the transmitter and receiver are very different. It is recommended to use a 10W PA transmitter for 10 ກິໂລແມັດ. You also need to consider that your receiver is installed on the car, and it keeps moving at high speed at any time. Only a high-power transmitter can ensure the signal stability at the receiver.
Q: What frequency is better? 2.4G or 5.8G?
A: The frequency range of Cofdm is 170~860Mhz.
We also have products that use 2.4G or 5.8G, but the range of these two intervals is the same as the frequency of WiFi, which will cause the transmission to be greatly interfered by WiFi, and the transmission distance will be greatly shortened.
If there are digital TV DVB-T signals locally, try to avoid frequencies in these ranges when selecting frequencies.
Q: Can customers adjust the frequency by themselves? If sometimes the frequency is occupied.
A: The default center frequency is 595Mhz, generally there is +/-15Mhz bandwidth, which is 30Mhz, and the frequency range can be adjusted. (580-610Mhz).
Beyond this range, it is necessary to change the antenna and PA customized according to this center frequency.
Q:How does the customer adjust the frequency of the transmitter or receiver? Is there any software to change the frequency?
A:It's very easy, the transmitter can use the assistant board next to the picture, and the receiver's assistant board is on the fuselage, with a screen and buttons.
But it is not recommended for customers to adjust, because sometimes he changed the parameters of the transmitter but did not change the parameters of the receiver, saying that he could not receive the signal.
Q: Can I adjust the power amplifier on the transmitter?
A: The user can reduce the actual output power by increasing the impedance of the high power, but cannot increase the transmitter of the low power PA.
ຍົກຕົວຢ່າງ, 10W PA can change to 5W PA, but can not change 5W PA to 10W.
- No one can tell you the exact transmission distance. Because the transmission distance depends on the height of your transceiver antenna and the type and thickness of obstacles, whether the transmitted signal can be diffracted, whether there is interference in the current frequency, ແລະອື່ນໆ.
- There are trees or a mountain in the middle, and the transmission distance is different.
- It is difficult to tell you an accurate transmission distance, even the walls have thickness, generally 500-1000 ແມັດ.
- Please watch our test video, if you think it is suitable, you can buy a sample for testing, if you are not satisfied, you can return it to us.
- Here is a form for COFDM PA and LOS and NLOS transmission distance for your references.
ປ | ການ | NLOS |
500mW | >10ກມ | <300m |
1W | >30ກມ | <500m |
5W | >60ກມ | <1500m |
20W | >120km | <3000m |
50W | >200ກມ | <5000m |
100W | >250ກມ | <10ກມ |
Now COFDM-908T supports H.264, not H265.
Max support 1080 50P. We have actually tested that at 1080P60, the frame will be stuck, or the recognition will be incomplete
- Power consumption is equal to current times voltage. ຍົກຕົວຢ່າງ, for a 10W transmitter, the current is 5.5A, and the voltage is 12V, so its power consumption is 66W.
- If you prepare a 1000W rechargeable battery and use a 10W PA transmitter, it is estimated that you can use 1000W divided by 66W, which is equal to 15 ຊົ່ວໂມງ.
-
Whether the link between the transmitter and receiver is good or the signal strength can be seen on the small screen at the COFDM receiver.
-
Not on the transmitter. Because COFDM is a one-way transmission, only the receiver can receive the signal strength of the transmission and show them on the screen. If the transmitter needs to see these signals, it is necessary to add a set of data transmission devices to transfer the status signal from the receiver to the transmitter and display them by the signal light.
-
The transmitter and receiver of two-way transmission can have this function, and it is recommended to choose a bidirectional transmission device.
- First of all the frequency is correct.
- In order to achieve the best performance of the transmitter, power amplifier and antenna, they are generally customized according to a central operating frequency point, and they can all work within a working frequency range, generally ±15Mhz. That is to say, when the central operating frequency is 290Mhz, the working range of the transmitter is 275Mhz~305Mhz. So it meets the frequency range of 280~300Mhz required by customers.
- Yes, the wireless video signal reception is improved by using Yagi and omni-directional antennas.
- Yes, we can build the transmission of telemetry and video in COFDM-908T.
- ທໍາອິດ, the 10-watt RF linear amplifier and the 20-watt RF linear amplifier use the same cavity, which is machined by a CNC mill.
- CNC milling machines are not only expensive but also take a long time to process. The 20W and 10W cavities are universal, so they can be used with each other. For faster delivery, this character was not changed and used directly.
- This product actually has 20 ວັດ. We used special instruments to test it before shipment. Please see the video below. (The instrument shows 3.04dBm plus the black attenuator 40dBm equals 43.04dBm)
- Test video at youtube: https://www.youtube.com/shorts/jfNoZeb1BIA
- Here are some correspondences between the output power and the dBm parameters displayed by the instrument.
- 20mW is 13dBm
200mW is 23dBm
1 Watts is 30dBm
2 Watts is 33dBm
5 Watts is 37dBm
10 Watts is 40dBm
20 Watts is 43dBm
50 Watts is 47dBm
100 Watts is 50dBm
Normal Four HDMI Video input and One HDMI output box
If it is just a simple splicing of four camera videos into one video, you can add a box with four HDMI inputs and one HDMI output in front of the transmitter. This means that the monitor on the receiver will always display each video on a quarter of the screen.
Yes, our dual antenna RF input receiver supports diversity. You can use two yagi directional antenna on our cofdm wireless video receiver.
For better signal reception, it is recommended to have one Yagi directional antenna and one omnidirectional antenna installed on the receiver.
It can be used by photographers. Currently supports 1080@60P, 1080ຕົວເຊື່ອມຕໍ່ XT30PW-M, 1080ຕົວເຊື່ອມຕໍ່ XT30PW-M
ໃນປັດຈຸບັນ, it does not support 1080i, nor does it support 4K transmission.
20km ໃນໄລຍະທະເລ HDMI ເຄື່ອງສົ່ງວິດີໂອໄຮ້ສາຍແລະການທົດສອບຮັບສໍາລັບເຮືອຫຼືຈາກຝັ່ງກັບເຮືອ
Long-range 20 Watts Power Amplifier Transmitter and Receiver needs a 12V 6A power supply
ການທົບທວນຄືນ
ມີຄວາມຄິດເຫັນທີ່ບໍ່ມີ.