Wat kann de drahtlose Video Sender maachen?
COFDM HDMI Sender, Wireless Video Receiver 10km 30km 80km 10W PA 150 km 4K LOS NLOS HDMI SDI CVBS bëllegst Längsten recommandéiert Date Link Drone PA Power Verstäerker IP Mesh gemaach OFDM
Wireless Video Sender fir Kamera
Typesch Uwendungen a Benotzungsszenarien
Hutt Dir eng ähnlech Demande?
Gratis Ufro, Gratis Zitat, Gratis Ënnerstëtzung!
1. Hues du 150 Kilometer vun 10-Watt Telemetrie fir eng Dron op 915Mhz? Ech brauch de Video net ze transferéieren, nëmmen d'Donnéeë vum Mavlink Message.
Mir brauchen e Baud Taux vun 57000 fir Mavlink.
2. Ech brauch e drahtlose Videosendersystem vum Ufer bis zum Bagger an der Marine fir eng 5km Iwwerdroungsdistanz.
Sidd Dir fäeg en Devis ze bidden fir e drahtlose Video Sender System ze liwweren, mir bedreiwen engem Bagger a wëllt Video vun Ufer op d'Dredge iwwer eng maximal Distanz vun iwwerdroen 5 Kilometer. Et ass an engem Marineëmfeld sou datt et muss robust sinn an och weider lafen 12 Volt ouni Internetverbindung.
3. Ech sichen no engem Mini a wearable cofdm tx rx, NLOS, een wee, AHD oder SDI-HD 1080P Kamera, 1Web Device Management UI fir drahtlos Videodatenlink Iwwerdroung fir UAV IP Kamera ze gesinn an z'änneren, 170-860MHZ, 200-Meter Transmissioun Distanz, a kee Kühlfan wéinst Kaméidi.
4. Ech sinn en UAV Entwéckler, an ech brauch eng Léisung fir meng zukünfteg UAVs. Ech brauch 20 km HD Video an e Mavlink Telemetrie Iwwerdroung an Empfangssystem. Ënnerstëtzt gimbal Kamera, Gimbal mat Zoom, an Zilverfolgung. Ass et méiglech e Laptop ze benotzen fir d'PTZ Kamera mat all Software ze kontrolléieren? Wat ass d'Gewiicht, Zoom Niveau, an Präis vun der Kamera?
5. Mir entwéckelen wearable Apparater equipéiert mat duebel USB Nano Kameraen. Mir benotzen de Moment e Wifi Netzwierk fir drahtlos Streaming, déi eng limitéiert Gamme huet. Ech hu mech gefrot ob Dir e Video Sender / Empfänger hutt deen an engem 1KM Beräich ouni Siichtlinn a gerénger latency funktionnéiert.
6. Mir sinn eng autonom Robotikfirma, elo sicht e Modem wéi RFD900 awer mat Video + Data fir 5 ze 10 km, Voll Duplex Daten, an Sbus Input.
7. Ech sichen no engem Sender an Empfänger, COFDM mat zwee-Wee Audio an One-Manéier Video, Ech muss mat bidirektionalen Audio kommunizéieren, Wäitschoss, Ech mengen 2W kéint gutt sinn. Wat kéint Dir mir roden?
Manpack Wireless Video Sender Zwee-Wee Stëmm Intercom RC NLOS COFDM 2KM-20KM
8. Ech brauch e drahtlose Videoiwwerdroungssystem wou ech benotze kann 4 Kameraen an 4 verschidde Plazen an ech wëll et op engem eenzegen Ecran kucken. Et gëtt ee Gebai Hindernis an engem 1 Kilometer Beräich. De Sender wäert ëmmer a Bewegung sinn awer den Empfänger wäert stationär sinn. Mir mussen d'Stëmm vun de Leit am Feld héieren a mir musse schwätzen wann néideg, kënnt Dir dëst am System enthalen?
9. Ech wëll iwwer Äre Wäitschoss Video Sender froen, installéieren op meng UAV, de Sender kann Video vun engem UAV an der Mëtt vum Bësch iwwerdroen fir d'Feier am Bësch ronderëm 20-30Km z'inspektéieren.
10. Ech sichen e klenge Sender / Empfängermodul mat engem 1-2 km Range déi Videodaten mat de gewënschten Framerates mat gerénger latency iwwerdroe konnten, an Net-Linn vun Vue. Zum Beispill, déi Dual Kamera Moduler déi mir am Moment benotzen, funktionnéieren op 19201080@30-60fps, an eng aner Kamera bei 320240@120FPS (AN).
11. Mir brauchen nlos 1km Mini a Lite Gewiicht onsichtbar wéi Spioun Video TX an TX, kuerz oder flexibel Sträif TX Mini Antenne fir verstoppt op de mënschleche Kierper, Ënnerstëtzung Web Kamera, an ënnerstëtzt zwee-Manéier Audio fakultativ.
12. Ech sichen no engem Dual-Band drahtlose Videodatentransceiver. Eng Frequenz (1.7G) gëtt benotzt fir Drone Kontrolldaten eropzelueden, an eng aner Frequenz (1.4G) Video vun der Dron op de Buedem erofzelueden. Et gëtt gehofft datt et effektiv d'Interferenz vun UAV Jammeren op UAVs vermeiden kann an d'Iwwerliewensquote vun UAVs verbesseren.
Frequenz personaliséierbar, Dual Frequenz UAV Video an Data Link Sender an Empfänger
13. Mir brauchen e System vun héich-Definitioun Video Transmissioun. De Sender gëtt um Daach vun engem Gebai op enger Héicht vun installéiert 10-15 Meter, an den Empfänger ass am Auto, vun oppene Beräicher ëmgi, a Siichtlinn. D'Kommunikatiounsdistanz ass 10 km. Weg recommandéieren eng gëeegent Léisung.
14. Hallo, we are a high school that has launched radiosondes in its educational projects. In the last launch, we used a 1.2 GHz video transmitter to transmit images from the stratosphere to the ground. We are not satisfied with the result achieved and we are looking for a video transmitter with the following characteristics: 1.2ghz frequency, FULL HD, RF power greater than 500mw, weight less than 100gr and consumption not exceeding 500ma.
We also offer a similar model for Spain’s Weather Observation and Prediction by Hydrogen Balloons in the Atmosphere, which needs 150km. We recommended TX900-5W-50km. 1.4 GHz frequency, Full HD 1080P HDMI or ethernet camera, RF Muecht 2 Watts, weight is 142 Gramm. Konsum 22 Watts.
15. Hallo, I need data transmission from an ethernet port. Around 1 megabit and receiver.
5 Watts Transmitter 1MBps with ethernet interface and Receiver with ethernet. Ech brauch een-Manéier Kommunikatioun. Sender op der Drone Säit Empfänger um Fliger. Et schéckt d'Donnéeën déi aus dem Ethernet Hafen kommen.
16. Mir entwéckelen en neien UAV, Sich no engem 150km HD Video Sender, duplex Operatioun, ugedriwwen vun 6s Batterie 22,2V. Wa méiglech d'Reechwäit bis zu 500 km verlängeren.
17. Ech géif gären en 2-Wee Drone Transceiver kafen.
18. Mir sichen en IP Radio. Mir mussen Ethernet iwwerdroen an kréien, déi HD Video an Datenkontroll zur selwechter Zäit enthält. den Interface muss eppes wéi RJ45 sinn (oder am léifsten méi robust), kënne mir dës an engem MESH benotzen? Ech virstellen 1W Max Muecht ass genuch, Mir maachen de Moment 4Km.
TX900 Mesh Versioun ass recommandéiert.
19. Fir den Iwwerdroungssystem dee mir brauchen, kuckt w.e.g. hei ënnen fir d'Detailer.
eng) SDI Input fir 3G-SDI z'ënnerstëtzen (maximal 1080p60)
b) Ënnerstëtzt Broadcast Qualitéitskompressiounsformat (H.264 @Main Profil)
c) Ënnerstëtzt embedded Audio (Max 16 Channels)
d) Ënnerstëtzung NLOS
e) Ënnerstëtzung Transmissioun Muecht 10W
f) Ënnerstëtzt GPI Input op den Empfänger a schéckt den On / Off Signal zréck an d'
Sender
g) Niddereg latency wéi 200-300ms
h) Ënnerstëtzt COFDM an QAM64
i) Ënnerstëtzt 128bit AES Verschlësselung
j) Ënnerstëtzt DC10V bis DC28V
k) Ënnerstëtzt Forward Feeler Korrektur 1/2, 2/3, 3/4, 5/6, 7/8
l) Frequenz bandwidth 8Mbps
20. Mir besëtzen a bedreiwen 15 Fliger, Ech sinn wierklech interesséiert Är 10W PA 50 km Streck. Ech géif brauchen 50 Empfangskits sou datt Polizisten um Terrain Videostreaming direkt vum Iwwerwaachungsfliger kréien. Wat wier de Präis an Disponibilitéit? Wat ass d'Frequenz an d'Längt vun der Welle benotzt?
21. Mir brauchen e 5w Telemetrie Transceiver fir op engem fixe Flillek Uav ze installéieren, Eis Autopilot ass Pixhawk Cube orange, with amplifiers for 915mhz, or 10w only telemetry without video, baud Taux 57000 for Mavlink message.
22. We currently request your recommendation of a suitable video link radio that fulfills the following requirements:
- Betribssystemer Heefegkeet: 2216-2256MHZ
The video link should be capable of operating within this frequency range.
It should have the ability to segregate into separate channels, selectable or tuneable with an 8MHz bandwidth each. - Capability:
We require the video link radio to have the capability of simultaneously downlinking 3 payloads such as an EO/IR payload, a nose camera, and a camera. - Maximum Range/ Operating Distance: 100km
The video link radio should be capable of achieving a range of 100km for reliable transmission. - Connection Type:
We are specifically interested in a video link radio that supports Ethernet connectivity at a speed of 10/100Mbps.
Zousätzlech, it should provide compatibility for SDI video connection. - Video Verspéidung < 200M=ms
The video link radio should offer a video delay of no more than 200ms to ensure real-time video transmission.
23. I need a transceiver for video and data commands, use the on-ground, nlos 10km, slightly have some obstacles. I need to transmit video and custom data. There are a camera and a single-board computer like raspberry pi in each unit of my project, that supports the below, diagram.
- Communication and control: 1X RJ45 Ethernet port; 2X alarm inputs, 1X alarm output; 1X audio input, 1X RS485 input.
- Protokoll: Support HTTP, HTTPS, FTP, SMTP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, ICMP, DHCP network protocols; support ONVIF and GB28181 protocols.
- Development interface: Support HP-SDK secondary development.
24. What do you offer in RF wireless A/V transmission that is smaller in size(Handy), nlos, secured, RCA or HDMI input, and Frequency available in the USA? Sécherheet vun Daten, Verschlësselung, Gesetzesvollzéier / fir nlos surv / intel, Sicht 600ft min Effizienz (200 Meter),
Ënnerstëtzt RCA Input, mir hunn dräi Modeller, COFDM-912T (170-860MHZ, Nëmmen RCA Input), an COFDM-907T (170-860, an 900-930 MHz, RCA + HDMI Input souwuel Ënnerstëtzung). 900-930MHz Frequenz ass ok an den USA. Also COFDM-907T ass recommandéiert.
24. Salut hutt Dir en Analog A/V Sender an Empfänger an 2.4 oder 5.8 GHz fir laang Distanzen (ronn 5km)
Entschëllegt, mir hunn nëmmen HD 1080p drahtlose Video Sender an Empfänger, 2.4G oder 5.8G kuckt w.e.g Vcan 1818, 1.4G ass recommandéiert, Wéinst Wifi benotzt och 2.4G an 5.8G, an et ass einfach ze stéieren.
25. Ech géif gären e Mini Autonom Gefier Projet maachen, Ech géif gären wëssen ob et méiglech ass e Live Video Stream mat Rasberry PI an engem Python Programm ze schécken deen de Stream duerch RTSP schéckt deen duerch VLC opgemaach ka ginn.
If you just need a transfer a live video stream from your camera to Rasberry PI by RJ45, then our Vcan 1746 empfuel. If also need to transfer the live video stream from your robot to a wireless receiver or computer, which supports RTSP protocol by VLC player, then please check our Vcan1726.
26. I’m searching for a specific downconverter, to be used with our own OFDM RF link:
50ohms RF input: 1.435 ze 1.525 GHz
75 ohms IF output: any frequency band, between 100Mhz and 900MHz
Preferred LO frequency: 1846zréckkomm
Low gain: about 28dB
Hight gain: about 43dB
DC powered from IF output port, 12-24vDC range
27. We are researching a ground robot to explore the rainforest and collect semple in the forest. We are using a radio from another manufacturer to transmit the image and commands between the receiver and the transmitter. But the problem we are facing is regarding the transmission distance. When the robot enters the forest, the maximum distance we are achieving is 100 meters between the transmitter and receiver, but we need much more than that. I was looking at your communication solutions here.
28. We are searching for a transmission for 50-80km, for a meteorological balloon, Cd'FDM-908T-10W is ok? with a 12V battery and HDMI?
29. Salut, Ech brauch en Apparat dat iwwerdréit 4 camera video signals and data signals for controlling the robot over 2km for ground-to-ground communication.
30. Hallo, I need a complete video signal transmission system (one way only) with a range of 80-100 km. I am an aerial photographer and I need a high-quality digital image. The transmitter frequency can be in the range of 170-800 zréckkomm. Interested in the complete set of the transmitter, Receiver, and corresponding antennas. An analog signal will be used as an input.
31. Do you have any model which you can support to transmit not only A/V but also data(ex: RS-232 etc.) by any chance?
32. I’m interested in buying your video transmission modules long range. I mean transmitter, receiver PA 2W – 30km, PA 10 W – 100 km,
33. I would like clarification on the two-way data transfer capabilities. Does this support the ability to control, and get telemetry data and video all at the same time with just two modules?
34. I need one encoder with the COFDM modulator, H264 / HEVC ASI, or SDI input. And one receiver with diversity frequency RF COFDM, which is input frequency 2.350-2.450Ghz output 550~650 Mhz or 1350-1450Mhz, bit rate max 8Mhz bandwidth.
35. I want to design and fabricate a drone for surveillance of a seaport area in Mexico. Please let me know if your equipment is adequate for this purpose. Does this equipment allow me to send not only video and sound, but can it also control the drone itself, or do I need a separate control system with PPM or Sbus like Pixhawk or Ardupilot for it? In short, can you help me with the design of a complete system? ech, natierlech, would buy all the needed products as much as available from you. I am used to working with SIYI products and this would be the first time for you. If you are interested I will give you more details on the project.
36. Hallo. I need a one-way wireless video transmitter and receiver. It must have low weight and will be used in UAV. What you can suggest?
37. We need ONE WAY link with ip UDP video stream, but not two-way. Do you have one-way link ip input on the modulator and ip output on the demodulator?
We have two models, Vcan 1816 an Vcan1886 to meet your demand.
38. Looking for dual-band booster 2,4-5,8 Ghz, with output power 10 W- for use with UAV drones, in territory with big interference ( big parks, forests).
Eis Vcan 1818 supports 2.4G and 5.8 G. Output power 10W is optional.
39. We are looking for telemetry modules for our project. Please share product information and prices for the 80 to 150-km radio link. Also please indicate if compatible with Pixhawk autopilot. We need a reliable product.
40. Will your product be able to effectively transmit wirelessly through walls? roughly about 500m in distance.
Because we don’t know what your specific wall and environment
So I can’t tell you whether it can go through it or not. I believe that other sellers can not guarantee without knowing the specific situation. You need to test yourself to know this. Here is a test video for your reference. Een wee, Zwee-Wee
41. We are interested in unidirectional video transmission at a distance of 15 km in line of sight. It is required to transmit individual frames of BMP format or a JPEG of 1280×1024 pixels without errors. The operating temperature range of the product is from minus 40 to plus 50 ° C.
42. I am engaged in ground robots for agriculture. We are using MATEK Controller with ArduPilot. It is desirable that we can easily connect your equipment.
We need a kit for the longest video transmission with antennas, as well as a telemetry transmission kit (robot control) with antennas. It is desirable that both video and control work at the same distance.
I ask you to send an offer with a manual and specifications for such equipment, as well as the cost.
- In the video kit, Ech brauch 2 cameras with which your equipment works.
- In the communication transmission kit, I need a joystick with which your equipment works.
42. I want to buy a long-range COFDM-912T transmitter with a 5-watt amplifier.
Rei 450 – 1300 zréckkomm. Operatioun Frequenzen (8 Riewe) an Antennen fir si: 477, 610, 675, 724, 816, 970, 1180, 1230 MHZ. Direktional Antenne (30-60′) – for Rx. Antenna circular orientation – for Tx. I need a complete long-range video link for the UAV plug&play kit.
Zousätzlech, I ask you to recommend a video camera with gyro stabilization (UAV use) suitable for this radio transmitter.
43. I am engaged in ground robots for agriculture. We are using MATEK Controller with ArduPilot. It is desirable that we can easily connect your equipment.
We need a kit for the longest video transmission with antennas, as well as a telemetry transmission kit (robot control) with antennas. It is desirable that both video and control work at the same distance.
- In the video kit, Ech brauch 2 cameras with which your equipment works.
- In the communication transmission kit, I need a joystick with which your equipment works. Merci.
iVcan: Our transmission system is a wireless transparent transmission system. We can transfer the video and any data, if your camera supports PTZ (Pan/Tilt/Zoom function) and joystick, then connect to our system correctly, we can transfer the data, and help you to operate them wirelessly.
44. We have a set of 5 X USB cameras. We are looking for a Multiplexor that can combine these 5 images before we put them through the radio.
45. Hallo, I’m using 2 nos of PTZ camera and able to control it from ground control. Can I use this transmitter and receiver to control my RC device too or is it unable to be integrated maybe got another solution?
46. I want a 30km video camera audio ethernet data transfer.
47. I live in the USA and need something to transmit an HD SDI video from a camera to a ground station with little to no lag. I would also love to get a LBUS signal to be transmitted also in the packets.
48. The data rate required is 30Mbps for video transmission, Full duplex transmission.
49. Hallo. I need a one-way wireless video transmitter and receiver. It must have low weight and will be used in UAV. What you can suggest?
50. We need to bring to the ground a video feed from planes flying at about 350mph, up to 10,000ft, in a 10mi radius from the main point. We will bring the video feed to a production truck for live broadcast. The camera can be IP or HDMI.
51. Can you suggest a good-quality CODFM video link? Our input is NTSC video from a camera.
The receiver Output should be HDMI into our monitor. (720 is acceptable, 1080P preferred). Link to operate in 902 -928 Mhz band (1 watt Tx power level). Looking for low latency and a very good NOL environment
52. Can you provide a modem with the specifications below? – Heefegkeet: 1.4~1.6Ghz (1Mhz unit setting) – Bandwidth: 2MHZ – Speed@ Distance: duplex10Mbps @ 8km (5 Meilen) – optional: Spread Spectrum Frequency Hopping.
53. Our team aims to send the rocket beyond 40 km and then 100 km, do you have any recommendations for the transmitter, Receiver, and camera?
54. My project is to have a Base Station that receives data from a robot (Kameraen, sensor data, etc…) and sends data to the robot to control it (bidirectional system).
55. I will need a solution to transmit wireless the video from 6 cameras within a range of 5 Kilometers. What solution can you propose?
56. il prodotto + economico per trasmettere e ricevere dati tcp/ip alla distanza da 3 a 5Km. cortesemente anche il costo e la disponibilita’.
57. Here are my project details and demand.
- I want to connect 4-6 cameras into one transmitter, and then transmit all the camera video streams through one transmitter module. All my cameras are Pan-tilt-zoom cameras with night-vision capabilities
- All The video camera output types can be the same or different type. I am mostly focusing on RJ45 (Ethernet IP) or also HDMI. (But they might have different output types).
- Then I want to receive all the video streams into one receiver module (from one transmitter). From the receiver module, I will take the output of 4-6 Kameraen (RJ45 Ethernet IP or HDMI) and display it on screen (probably HDMI port)
- Let’s Say I have 4 Kameraen, I want to see the video feed of 4 cameras in a single screen (Split screen mode)
- I will send a control command from the Receiver to the Transmitter, to control my device. What is the procedure for uploading control command data to the transmitter from the receiver? I also want to get some response data from the transmitter to the receiver. What is the procedure to send response data to the receiver from the transmitter?
Ech brauch 3 sets of such setup above for controlling 3 harvesters by 3 different people remotely. They each will control one harvester remotely via control command and see the video feed from 4-6 Kameraen (per harvester) in one monitor (in split screen mode). I know “Arduino” decently. If your engineers are familiar with “Arduino”, please give me some hints.
Tell me the pricing also. If it’s good quality with a decent price point, I might consider buying some more after some successful trial run.