Solution for HDMI video telemetry and RC transmitter for 15km range

Solution for HDMI Video, テレメトリー, and RC Transmitter for 15Km Range

We understand your requirement for a professional-grade HDMI video, テレメトリー, and RC transmitter system capable of operating over long distances, specifically around 15 キロメートル. Such a system is critical for UAV, ドローン, and other remote operations where high-quality video transmission, reliable telemetry data, and robust remote control signals are required simultaneously. 下に, we provide detailed information about the solution we can offer, including capabilities, limitations, and technical considerations.

---

1. Solutions for HDMI Video, テレメトリー, and RC Transmission at 15Km

はい, we offer a complete solution that meets your requirements for transmitting HDMI video, テレメトリー, and RC control signals over a 15-kilometer distance. Our system is specifically designed for UAV and drone applications where high-definition video, リアルタイム制御, and telemetry feedback are essential for mission success.

The solution integrates a high-performance wireless video transmitter capable of encoding HDMI video into a robust COFDM or OFDM transmission format. This ensures that even in challenging environments with potential interference, multipath effects, そして障害物, the video signal remains stable and high quality. The transmitter simultaneously supports telemetry data そして RC control channels, combining all essential communication links in a single system. This integration reduces the need for multiple separate transmitters, simplifies installation, and minimizes payload weight on UAV platforms.

システムがサポートする high-definition HDMI input, enabling direct connection to cameras, UAV gimbals, or other video sources. The transmitted video maintains Full HD quality, with low latency to ensure real-time situational awareness and precise control for UAV operators. The telemetry link allows for real-time status monitoring of UAV parameters such as GPS coordinates, battery level, 高度, and other sensor data. RC signals are transmitted reliably alongside video and telemetry, maintaining control of the UAV across the full operational range.

---

2. 見通し外 (NLOS) Operation Using Relays

Regarding the NLOS situation, our solution supports one relay in mesh mode, allowing a secondary UAV or relay station to extend the effective communication range and bypass obstacles such as buildings, 丘, or trees. このモードでは, the primary UAV transmits video, テレメトリー, and control signals to a relay UAV, which then forwards the signals to the ground control station (GCS).

It is important to note that while one relay is supported, 使用して two or more relays in series may significantly reduce the available data rate due to cumulative signal processing and retransmission delays. したがって, for long-range operations involving NLOS conditions, we recommend planning the deployment with one relay UAV positioned strategically to maintain line-of-sight to both the primary UAV and the GCS. This configuration ensures a robust and stable connection without significantly compromising video quality or telemetry data rate.

---

3. Data Rate Performance

Our system is capable of maintaining a data rate greater than 1.2 Mbps at a distance of 15 キロメートル, which meets most high-definition video and telemetry requirements. 実際には, under optimal conditions, the system can support まで 4 Mbps, providing sufficient bandwidth for Full HD HDMI video, multiple telemetry channels, とRC制御データを同時に.

This high data rate ensures that video streams remain smooth, telemetry data is transmitted in real time, and RC commands are received without delay, even at extended ranges. The system employs advanced FEC (前方誤り訂正) and robust modulation schemes such as COFDM or OFDM to maintain signal integrity, minimize packet loss, and resist interference from other RF sources operating in the same frequency band.

---

4. Additional Information on HDMI Video, テレメトリー, and RC Transmission

The HDMI video, テレメトリー, and RC transmitter system is designed for professional UAV operations, 産業用監視, 測量, 捜索と救助, and other applications that require long-range, high-quality wireless communication. Key features of the system include:

• HDMI Input Support: Full HD video transmission directly from the camera without compression loss.
• Telemetry Channels: Real-time monitoring of UAV parameters such as GPS, 高度, バッテリーの状態, and sensor data.
• RC Control Integration: Reliable control of UAV functions including flight commands, gimbal control, and other auxiliary functions.
• 低遅延: Transmission latency optimized for FPV and real-time control, ensuring responsiveness and safe operation.
• Robust Long-Range Communication: COFDM/OFDM modulation with Forward Error Correction and optional encryption for secure transmission.
• Flexible Deployment: Supports line-of-sight and limited non-line-of-sight scenarios using a single relay UAV.
• Frequency Options: Multiple operating frequency bands available to meet regulatory requirements and reduce interference in crowded RF environments.
• ユーザーフレンドリーな操作性: Plug-and-play setup with clear interface, minimal configuration, and reliable performance under varying environmental conditions.

For more detailed technical specifications, integration options, and system deployment guidance, please contact us directly. Our engineers can provide tailored recommendations based on your specific UAV platform, operational environment, and mission requirements.

---

要約すれば, 私たちの HDMI video, テレメトリー, and RC transmitter solution is capable of supporting professional UAV operations at 15 km範囲, with high data rates, integrated video and control channels, and optional relay capability to overcome non-line-of-sight challenges. This system is designed for reliability, ease of use, and high-quality video transmission in demanding aerial applications.