Drone IP MESH Video Downlink

100km Drone IP MESH Video Downlink

It builds a no center, autoformante, auto-adattamento, and self-healing dynamic routing/
automatic relay communication mesh network. It achieves dynamic routing, multihop relay HD video, Dati multicanale, e Fidelity Voice tra diversi nodi della stessa rete in applicazioni complesse, such as fast movement and non-line-of-sight environmental distance.
Smart antenna MIMO and self-forming packet wireless mesh network AD-HOC/MESH, which make it provide real-time HD video and broadband Ethernet connection with a 30Mbps transmission rate and distance of 100km-150km or more. It Is special for wireless communication in critical private networks.

100km Drone IP MESH Video Downlink

Caratteristiche principali

➢Bandwidth 1.4Mhz/3Mhz/5Mhz/10Mhz/20Mhz

➢10Watts RF power

➢Light weight: 280g

➢Transmitting Power: 40dBm

➢Support 800Mhz/1.4Ghz frequency options

➢Air to ground 100km-150km range

➢NLOS 3km-10km ground to ground distance

➢Automatic power control

➢Automatic frequency point control

➢Ethernet communication via PH2.0 interface

➢RS232 communication via PH2.0 interface

Applicazione

➢Point-to-multipoint long-distance communication

➢Power and hydrological line patrol monitoring

➢Emergency communications for fire fighting, border defense, and military

➢Maritime communications

➢Digital oilfield

➢Fleet formation

Interfaccia

COMMENT

Livello elettrico	2.85Dominio di tensione V e compatibile con il livello 3V/3.3V
Dati di controllo	RS232
Velocità di trasmissione	115200bps
Modalità di trasmissione	Modalità pass-through
Livello di priorità	Higher priority than the network port when the signal transmission crows, i dati di controllo verranno trasmessi in via prioritaria
Nota: 1. The data transmitting and receiving is broadcast in the network. After successful networking, each FD-615MT node can receive serial data.2. If you want to distinguish between sending, ricevere, e controllo, you need to define the format yourself

Automatic Frequency Point Control

After booting, the Mimo mesh will try to network with the pre-stored frequency points before the last shutdown. Se i punti di frequenza pre-memorizzati non sono adatti per l'implementazione della rete, proverà automaticamente a utilizzare altri punti di frequenza disponibili per l'implementazione della rete.

Controllo automatico di potenza

La potenza di trasmissione verrà regolata e controllata automaticamente in base alla qualità del segnale in tempo reale.