Enlace descendente de video IP MESH para drones

Enlace descendente de video IP MESH para drones

100km Drone IP MESH Video Downlink

It builds a no center, autoformación, autoadaptativo, and self-healing dynamic routing/
automatic relay communication mesh network. It achieves dynamic routing, multihop relay HD video, datos multicanal, y fidelidad de voz entre diferentes nodos de la misma red en aplicaciones complejas, such as fast movement and non-line-of-sight environmental distance.
Smart antenna MIMO and self-forming packet wireless mesh network AD-HOC/MESH, which make it provide real-time HD video and broadband Ethernet connection with a 30Mbps transmission rate and distance of 100km-150km or more. It Is special for wireless communication in critical private networks.

100km Drone IP MESH Video Downlink

Características clave

➢Bandwidth 1.4Mhz/3Mhz/5Mhz/10Mhz/20Mhz

➢10Watts RF power

➢Light weight: 280gramo

➢Transmitting Power: 40dBm

➢Support 800Mhz/1.4Ghz frequency options

➢Air to ground 100km-150km range

➢NLOS 3km-10km ground to ground distance

➢Automatic power control

➢Automatic frequency point control

➢Ethernet communication via PH2.0 interface

➢RS232 communication via PH2.0 interface

Solicitud

➢Point-to-multipoint long-distance communication

➢Power and hydrological line patrol monitoring

➢Emergency communications for fire fighting, border defense, and military

➢Maritime communications

➢Digital oilfield

➢Fleet formation

Interfaz

Drone IP MESH Video Downlink
Enlace descendente de video IP MESH para drones
Drone IP MESH Video Downlink
Enlace descendente de video IP MESH para drones
Drone IP MESH Video Downlink
Enlace descendente de video IP MESH para drones

COMMENT

Nivel Eléctrico2.85Dominio de voltaje V y compatible con nivel de 3V/3.3V
Datos de controlRS232
velocidad de transmisión115200bps
Modo de transmisiónModo de paso
Nivel de prioridadHigher priority than the network port when the signal transmission crows, los datos de control se transmitirán con prioridad
Nota: 1. The data transmitting and receiving is broadcast in the network. After successful networking, each FD-615MT node can receive serial data.2. If you want to distinguish between sending, recepción, y control, you need to define the format yourself

Automatic Frequency Point Control

After booting, the Mimo mesh will try to network with the pre-stored frequency points before the last shutdown. If the pre-stored frequency points are not suitable for network deployment, it will automatically try to use other available frequency points for network deployment.

Control automático de potencia

The transmitting power will be automatically adjusted and controlled according to the real-time signal quality.

Haz una pregunta

← Volver

Gracias por tu respuesta. ✨