IP MESH Ad Hoc ցանցի օգտագործման ուղեցույց
IP MESH Ad Hoc ցանցի օգտագործման ուղեցույց
Version number: iVcan-20230606
Բովանդակություն
Brief introduction
- Our Ad hoc network communication radio station, as a mobile self-organizing network, supports any network topology.
- Unlike traditional wireless networks, it is a wireless broadband system with no center, distributed, բազմահոփ ռելե, dynamic routing, strong invulnerability, and good scalability.
- Some routing protocols complete the wireless communication between nodes through wireless multi-hop forwarding.
- An ad hoc distributed broadband wireless network transmission system with an efficient MAC layer transmission protocol and a two-layer routing protocol.
- All nodes are completely equal, without any infrastructure, and can quickly build a dedicated self-organizing network between mobile nodes, provide instant adaptive communication, have excellent broadband performance, and support the real-time transmission of multimedia information such as video coding and audio coding.
- The system technology has the advantages of strong anti-interference ability, high spectrum efficiency, փոխանցման երկար հեռավորություն, anti-fading ability, and strong diffraction ability.
- It can realize real-time and high-quality wireless two-way data transmission functions in complex and non-line-of-sight environments.
Technical Features
- There is no need to set up a central station and complex system configuration. After the site is powered on, it will automatically form a network, and the communication can be started in “վայրկյան”;
- Arbitrary topology, բազմահոփ ռելե, relay forwarding;
- The logical attributes of each node can be flexibly configured;
- Ներկայումս, the same frequency network can support the interconnection of ≥32 nodes;
- The channel is encrypted with AES;
- The system data bandwidth peak value is 90Mbps;
- Ուժեղ հակամիջամտության ունակություն, high spectrum efficiency, փոխանցման երկար հեռավորություն, հակազդեցություն
- Strong falling ability and diffraction ability
Տեխնիկական պարամետրեր
- Communication frequency: 1412~1452MHz, adjustable in 5MHz steps;
- Փոխանցման հզորություն: 2*30dBm (2*1W), 1dBm step adjustable。
- Bandwidth mode: 5 / 10 / 20 MHz;
- մոդուլյացիան մեթոդը: multi-carrier TDD-COFDM;
- Carrier modulation: BPSK/QPSK/16QAM/64QAM (adaptive or fixed);
- ստանալու զգայունության: -98dBm @ 10MHz;
- Communication distance: 30կմ (ground-air/air-air line-of-sight), 8կմ (ground-ground line-of-sight);
- Communication rate: peak 90Mbps (հարմարվողական);
- Փոխանցման ուշացում: Single jump about 2ms；
- Multi-hop capability: մինչեւ 8 video jumps;
- Start time: ≤25S;
- Network access time: less than 1 երկրորդ;
- Routing switching: less than 1 երկրորդ;
- data ինտերֆեյս: network port x 2, RS232 x 2;
- Էլեկտրաէներգիայի սպառում: 2~8W
- Պաշտպանության մակարդակ: IP65;
- Աշխատանքային ջերմաստիճանը: -40~ + 70 ℃;
- Չափերը: երկարությունը: 72.8mm*width 47.3mm*height 17.9mm
- քաշ: 78G
Software operation Instructions
Support 5M, 10M, and 20M bandwidth, real-time graphical interface display, real-time map indication, եւ այլն.
The software disables DHCP by default, and the default IP address is 192.168.17.1 If you forget the address, please connect the 9th pin of the 26PIN cable to the ground to reset the parameters.
Enter the IP address of the module in the browser, and the default username and password are both admin. It takes about 20s for the module to connect to the network from power-on. The recommended browser is Chrome.
After entering, it defaults to simple mode, click expert mode to unlock more settings, suitable for professional debugging.
Status section:
Ակնարկ:
Topology map: (automatic refresh is turned off by default to save bandwidth, you can check automatic refresh)
Check only the display path, you can know the direct jump point relationship of each module
Check the details to judge the data connection status of each module. These are displayed dynamically in real time
Click Details: You can know the specific situation of each module directly:
Terminal state:
Ad hoc ցանց: You can remark the name, իհարկե, it can also be operated in the terminal state.
Spectrum scanning: Check the interference of each frequency band. Իհարկե, the frequency bands of different modules are purchased, and the scanning frequency bands are different.
Map: (Իհարկե, to know the location information of each terminal, GNSS modules such as GPS or Beidou need to be installed)
Support tile maps, image maps, network maps, եւ այլն.
Configuration section
ռեժիմ: 1. MESH node or bridge configuration
2. Wireless configuration:
2.1 Transmission power configuration, the power of different products purchased is different.
Channel թողունակությունը: 5M 10M 20M 40M
ջրանցք: Different channels are used to purchase different products
The coverage distance (մետր) needs to be filled in according to the actual situation. If it is set to 3000 մետր, it is impossible to actually run to 5000 մետր.
Number of Antennas 2
Fixed MCS rate: Can be set to off for automatic selection. If you want stable transmission, it is recommended to set the manual, շարք (MCS0 to MCS15)
թողունակություն, ելլէջում, Rate
Limit MCS rate: It is recommended to enable it. After enabling it, if the fixed rate is MCS4, the software will automatically select the best modulation method from MCS0 to MCS4 during the test.
| 5M | 10M | 20M | 40M | ||
| MCS0 | BPSK 1/2 | 1.7M | 3.3մ | 6.5M | 13.5M |
| MCS1 | QPSK 1/2 | 3.2մ | 6.5M | 13մ | 27մ |
| MCS2 | QPSK 3/4 | 4.8մ | 9.8մ | 19.5M | 40.5M |
| MCS3 | 16QAM 1/2 | 6.5M | 13մ | 26M | 54M |
| MCS4 | 16QAM 3/4 | 9.7M | 19.5M | 39M | 81M |
| MCS5 | 64QAM 2/3 | 13մ | 26M | 52մ | 108M |
| MCS6 | 64QAM 3/4 | 14.5M | 29M | 58.5M | 121M |
| MCS7 | 64QAM 5/6 | 16M | 32.5M | 65մ | 135M |
| MCS8 | BPSK 1/2 | 3.2մ | 6.5M | 13մ | 27մ |
| MCS9 | QPSK 1/2 | 6.5M | 13մ | 26M | 54M |
| MCS10 | QPSK 3/4 | 9.7M | 19.5M | 39M | 81M |
| MCS11 | 16QAM 1/2 | 13մ | 26M | 52մ | 108M |
| MCS12 | 16QAM 3/4 | 19.5M | 39M | 78M | 162M |
| MCS13 | 64QAM 2/3 | 26M | 52մ | 104M | 216M |
| MCS14 | 64QAM 3/4 | 29M | 58.5M | 117M | 243M |
| MCS15 | 64QAM 5/6 | 32.5M | 65մ | 130M | 270M |
From MCS0 to MCS7, two wireless ports send the same data in order to improve stability during the movement.
From MCS8 to MCS15, the two wireless ports send different data, which can make the rate X2
If it is in a mobile state, it is recommended to use BPSK or QPSK to transmit data. 16QAM and 64QAM are suitable for use with fixed transmission.
If MCS8 to MCS15 is used, it is recommended that the antennas of the two ports be 90 degrees from each other, օրինակ, one is vertical and the other is horizontal.
If drones are used, MCS0 to MCS2 is recommended.
The greater the bandwidth, the lower the sensitivity. The same goes for modulation.
above rate unit bps
3. ցանց:
4. User management:
5. համակարգ
6. Tools Configure serial port, GPS/Beidou/GNSS, 4G/5G access, և այլ պարամետրեր
6.1 Multi-device management, in the upper right corner, you can log in and manage users remotely, and it is also a real-time dynamic interface display or map display.
6.2 Serial port software settings:
Select Expert Mode, Tools, and UART Interface.
choose new
Ուշադրություն, if you use the serial port to transmit serial data, you have to choose ttyS0 (COM1 of hardware) and ttyUSB0 (COM2 of hardware), ttyATH0 is invalid, ռեժիմ: ցանց
բոդ տոկոսադրույքը 115200, կանգառը քիչ 1, parity none.
անուն 1, protocol UDP, IP address, 192.168.55.100 (the IP address here is the IP address of the other device, օրինակ, input the IP of the computer for the computer, and input the IP of the device for the device).
նավահանգիստ 20005, 20003. Choose a port number
The computer’s IP is set to a fixed 192.168.17.100
Short the TX RX pins of COM1 and COM2 of the device.
Use the TCP UDP test tool to fill in the IP and port of the device.
Send it to loop back the data.