UVC USB कैमरा से IP ईथरनेट स्ट्रीमिंग एनकोडर बोर्ड H.265/H.264 1080P60

UVC USB कैमरा से IP ईथरनेट स्ट्रीमिंग एनकोडर बोर्ड H.265/H.264 1080P60

अवलोकन

NS UVC USB Camera to IP Ethernet Streaming Encoder Board is a high-performance video encoder module designed to convert USB camera video में IP network streams in real time.
यह समर्थन करता है एच.265/एच.264 संपीड़न, यह सुनिश्चित करना अति-निम्न विलंबता, high image quality, and low bit rate transmission. With wide power input, यूएसबी पोर्ट, and support for आरटीएसपी, ओएनवीआईएफ, GB28181, and P2P protocols, this encoder board is perfect for ड्रोन, रोबोटों, industrial vision systems, and remote video conferencing.

---

विशेषताएं

1. Real-Time USB to IP Encoding — Converts UVC USB camera video to network stream over Ethernet.

2. Supports H.265/H.264 compression for low bandwidth and excellent HD quality.

3. Full HD 1080P@60fps encoding, तक 4K@30fps HDMI output (via expansion board).

4. यूएसबी पोर्ट — Supports one USB camera or Wi-Fi/4G module expansion.

5. टू-वे ऑडियो इंटरकॉम — Built-in G.711/AAC audio codec for full-duplex communication.

6. मल्टी-प्रोटोकॉल समर्थन — RTSP, ओएनवीआईएफ, GB28181, पी2पी, एचटीटीपी, आरटीएमपी, टीसीपी/आईपी, डीएचसीपी.

7. AI and OSD Customization — Supports NPU-based AI algorithm integration and OSD overlay.

8. लचीली बिजली आपूर्ति - DC 6-12V या PoE इनपुट समर्थित.

9. प्लेयर एसडीके खोलें - द्वितीयक विकास के लिए कस्टम प्लेटफ़ॉर्म के साथ आसान एकीकरण सक्षम करता है.

10. कॉम्पैक्ट आकार - केवल 38×38मिमी, एंटी-स्टैटिक और सर्ज प्रोटेक्शन डिज़ाइन के साथ.

---

विशेष विवरण

Recommended Player

---

अनुप्रयोगों

• यूएवी / ड्रोन - वास्तविक समय हवाई वीडियो स्ट्रीमिंग और निगरानी.

• औद्योगिक रोबोट - दृष्टि-आधारित स्थिति, निरीक्षण, और स्वचालन नियंत्रण.

• मानव रहित वाहन (यूजीवी/यूएसवी) – Network video transmission for navigation and remote operation.

• Network Video Conferencing Systems – Converts standard USB webcams into IP cameras.

• Microscopy / Electronic Magnifiers – High-definition visual output for laboratory and educational use.

• AI Vision Projects–Supports algorithm customization for smart recognition and analytics.

---

सामान्य प्रश्न

Q1: What type of USB cameras can be used?
ए 1: यह समर्थन करता है यूवीसी-संगत यूएसबी कैमरे, including visible light and thermal imaging models.This device is designed to convert USB camera signals into IP streams.

Q2: Does it support Wi-Fi or 4G connectivity?
ए 2: हाँ, one of the USB ports can be used for a Wi-Fi or 4G expansion module (extra cost).

Q3: Can it be used for AI image processing?
ए 3: हाँ, the module integrates an एनपीयू (0.5 सबसे ऊपर) that supports AI algorithm customization.

Q4: Is SDK provided for software integration?
ए 4: हाँ, we provide an open player SDK for PC, मोबाइल, and embedded systems.

प्रश्न5: Can this module output HDMI video simultaneously?
ए5: हाँ, यह समर्थन करता है HDMI 1080P60 output via an additional interface board.

Q6: कौन से बिजली विकल्प उपलब्ध हैं?
ए6: समर्थन DC 6–12V input and पीओई बिजली की आपूर्ति for flexible deployment.

क्यू 7. Can I connect a second USB camera via a USB hub or the USB0 port?
ए7: नहीं. The system currently supports only one USB camera input.
Even if you use a USB hub or attempt to connect through the USB0 port, the device cannot process or switch between two simultaneous USB camera inputs.

Q8. Does the system support dual-camera USB capture?
ए8: नहीं. Dual USB-camera input is not supported at this time. The system provides: One USB camera video input, and One network video stream output (आईपी ​​स्ट्रीम), Additional USB video channels are not available.

प्रश्न 9. What can be connected to the half-flex (half-pitch) cable connectors?
ए9: The half-flex cable connectors are designed for factory-defined internal interfaces only, जैसे कि: Internal debugging ports, Extension modules,Specific hardware functions reserved for system integration. These connectors are not intended for externally connecting additional USB cameras or third-party devices.

Q10. Can I enable multi-camera support through firmware updates or custom settings?
ए10: वर्तमान में, multi-USB-camera support is not available and cannot be enabled through firmware. The hardware architecture is designed for single-camera USB input.

प्रश्न 11: What is the purpose of the battery on the encoder board?
ए11: The battery powers the on-board RTC (Real-Time Clock). The RTC keeps track of the system date and time even when the device is powered off, ensuring accurate timekeeping for functions such as timestamping recorded video or scheduling tasks.

प्रश्न12: What is the resolution of the analog video output?
ए12: This USB-to-CVBS/video streaming encoder board outputs analog video with the following resolutions:

• पाल: 720 × 576 पिक्सल

• NTSC: 720 × 480 पिक्सल

प्रश्न 13: Does the board provide both analog and IP outputs simultaneously? How is it determined which output is used?
ए 13: हाँ, this USB UVC camera video encoder board supports simultaneous CVBS (अनुरूप) and IP/Ethernet video output. Both outputs can work at the same time, allowing you to monitor video via analog displays while streaming over the network. There is no need to switch between outputs; the board automatically provides both.

प्रश्न14: We want a working temperature range of -30°C to +50°C. क्या यह संभव है?
ए 14: हाँ, we have conducted dedicated testing, and the board has been verified to start up and operate normally at -30°C and continue functioning correctly at +50सी.

---

सापेक्ष पोस्ट

1. How to set UVC USB to IP Encoder for YouTube Live Stream?