COFDM IP wireless data transmitter module
COFDM IP wireless video data transmitter module One-way Ethernet transparent transmission network port Vcan1816

Table of Contents
परिचय
- This ethernet COFDM module supports transmitting the data from the ethernet port to TX RF out.
- Common cofdm transmitters are video signal inputs such as HDMI, CVBS, एसडीआई, or AHD. This one is a transparent transmission module that can support IP cameras and support video and data through cofdm.
- Paired with this COFDM network video data transmitter is a COFDM receiving module, which can realize HDMI and CVBS output, and can also output video to a computer, आरटीएसपी, or UDP player through an IP network port RJ45.
- The key role is to use UDP broadcast/multicast to send data.
-
COFDM modulation with low latency;
-
Stable signal transfer in NLOS and high-speed moving;
-
Adjustable working frequency 170-4000Mhz, बैंडविड्थ, संचरण शक्ति, वगैरह;
-
Ethernet connection for IP data UDP broadcast transmission
-
Maximum 31.67Mbps wireless transmitting bitrates
-
Embedded RTSP video client to get video from IP camera via Ethernet connection

- COFDM wireless transmission module + receive the module, forming a one-way wireless transmission network port transmission link
- The transmitting module receives data through the network port and transmits the data received by the network port in the form of COFDM
- After receiving the data, the receiver receives the demodulation and then outputs it through the network port

Unidirectional COFDM network port wireless transmission module function:
विशेषताएँ
- The host computer data is received through the network port, and then the network port data is transmitted.
- डेटा इनपुट: नेटवर्क पोर्ट, support protocol UDP broadcast/multicast. Physical interface: RJ45 seat or 4PIN 1.25mm pitch seat
- सीएफजी-यूएआरटी: COFDM modulation parameter configuration serial port, 4PIN 1.25mm pitch seat, can be docked to our parameter configuration panel. Users can set the center operating frequency point, वायरलेस बैंडविड्थ, and other modulation parameters (such as protection interval, convolution bitrate, constellation mode, transmission gain, वगैरह।) through the reference serial port.
- COFDM Transmitter Interface (टेक्सास): MMCX female.
- टीएफ कार्ड इंटरफ़ेस, सॉफ्टवेयर अपग्रेड, and maintenance.
- पावर इनपुट इंटरफ़ेस (शक्ति): 2PIN 2.0mm pitch Phoenix terminal. वोल्टेज आपूर्ति: 7वी~24वी.
- Link LED indicator: The light of the work is emitted, and the data is flashed when the data is transmitted usually.
- पावर एलईडी सूचक: The power input indicator, the normal power supply is always on.
- Transmitter module size: 73x51mm (excluding the size of interface devices and connectors protruding from the board edge), thickness less than 15mm.
- Supported COFDM modulation parameters:
- Configurable convolutional encoding ratios: 1/2, 2/3, 3/4, 5/6, 7/8
- Configurable constellation: क्यूपीएसके/क्यूएएम16/क्यूएएम64
- IFFT mode: 2के
- Configurable protection intervals: 1/4, 1/8, 1/16, 1/32
- वायरलेस बैंडविड्थ: 1 ~ 8MHz MHz adjustable, 1KHz कदम
- Configurable RF output power: -94dbm ~ -5dbm (different operating frequency points, the maximum transmit power is different).
- Center operating frequency point: between 200MHz ~ and 2300MHz can be configured arbitrarily

विनिर्देश
आईओ
| आरएफ आउटपुट | MMCX female |
| TTL 3.3V control uart | 4पिन PH1.25mm कनेक्टर |
| विद्युत आगम | 2PIN PH2.54mm phenix Connector |
| ईथरनेट पोर्ट | 4पिन PH1.25mm कनेक्टर |
| TF-card | For firmware update |
| Power led | Red constant light when the device is normally powered |
| Link led | Green blinks on transmitting |
Modulation
| मॉड्यूलेशन प्रारूप | COFDM(डीवीबी-टी) |
| वाहक | 2के |
| Bandwidth | 1 मेगाहर्ट्ज से 8 मेगाहर्ट्ज तक कॉन्फ़िगर करने योग्य, चरण दर 1KHz |
| एफईसी | 1/2, 2/3, 3/4, 5/6, 7/8 |
| गार्ड अंतराल | 1/32, 1/16, 1/8, 1/4 |
| तारामंडल | क्यूपीएसके, 16QAM, 64QAM |
RF Transmitted
| फ़्रीक्वेंसी बैंड | 70MHz~4GHz |
| ट्यूनिंग चरण का आकार | 1KHz |
| संचरण शक्ति | Configurable, maximum -5dBm(subject to frequency) |
निगरानी एवं नियंत्रण
Comprehensive setup with our Config Panel or other device via control uart.
तापमान की रेंज
पूर्ण विशिष्टता: -40° से +70°C परिवेश
भंडारण: -40° से +85°C
Dimensions
73x51x11mm (बोर्ड के बाहर कनेक्टर शामिल नहीं हैं)
बिजली की आवश्यकताएं
इनपुट रेंज: 7~24वीडीसी
Power consumption: <250mA@12V
I/O Signal

RJ45 ethernet COFDM Transmitter for the IP camera video Transmission

This ethernet IP input COFDM Video transmitter module can receive video from an IP camera via an Ethernet connection with a built-in RTSP client and transmit it. On the COFDM receiving side, our COFDM module has a built-in RTSP Server that allows video streaming over Ethernet for remote software or hardware decoders.
How to use it as the COFDM Relay repeater module?
This module already has a TX transmission function. If you add a dual-antenna receiving module and combine them, you can form a COFDM relay/repeater module. बिल्कुल, you need to add a bandpass filter to filter out clutter interference and increase PA to transmit a longer range. If you need customization, कृपया हमसे संपर्क करें.

Demodulation and Modulation
| मॉड्यूलेशन प्रारूप | COFDM(डीवीबी-टी) |
| वाहक | 2के |
| Bandwidth | 1 मेगाहर्ट्ज से 8 मेगाहर्ट्ज तक कॉन्फ़िगर करने योग्य, चरण दर 1KHz |
| एफईसी | 1/2, 2/3, 3/4, 5/6, 7/8 |
| गार्ड अंतराल | 1/32, 1/16, 1/8, 1/4 |
| तारामंडल | क्यूपीएसके, 16QAM, 64QAM |

RF Received
| फ़्रीक्वेंसी बैंड | 160मेगाहर्ट्ज~860 मेगाहर्ट्ज |
| ट्यूनिंग चरण का आकार | 1KHz |
| संवेदनशीलता | -97±1dBm(बीडब्ल्यू=8मेगाहर्ट्ज, क्यूपीएसके, सीआर=2/3, जीआई=1/16) for one channel and add 3dBm for two-channel |
RF Transmitted
| फ़्रीक्वेंसी बैंड | 70MHz~4GHz |
| ट्यूनिंग चरण का आकार | 1KHz |
| संचरण शक्ति | Configurable, maximum -5dBm(subject to frequency) |
COFDM wireless transmission system transmission rate calculation
वायरलेस ट्रांसमिशन दर (air interface rate):
दर(एमबीपीएस) = (बैंडविड्थ(MHz) * 8.0/7.0) / (1+सैनिक) * 1512/2048*लॉग2(नक्षत्र बिंदु) * कोड_दर * 188/204.
Take the 8MHz bandwidth as an example of different protection intervals, convolutional bitrates, data rates corresponding to constellations, and the required received signal-to-noise ratio:

UART AT Command
एटीडीआर、एटीएसडी、एटीएसजी、एटीएसएम、एटीजी、एटीएसआर、एटीजीआर、ATGB is useful
For the UART AT command operation and format, कृपया नीचे दिए गए लिंक की जाँच करें.
एनकोडर मॉड्यूलेटर डिकोडर डेमोडुलेटर मॉड्यूल पैरामीटर कॉन्फ़िगरेशन निर्देश सीओएफडीएम एटी कमांड
Receiver Module

Suggestions
- This is a one-way unidirectional transmission system. if you need a two-way bidirectional transmission system, please check this link. https://ivcan.com/t/two-ways/ or https://ivcan.com/ru/p/mini-cofdm-wireless-ethernet-transmission-module-rj45/
- This is only a data transmission system, if you need video+data transmission, please look details of these modules, https://ivcan.com/p/modulator-demodulator-module-encoder-decoder-hdmi-cvbs/
- If you need a relay (अपराधी) to support a longer transmission range (distances), please choose stronger PA (शक्ति एम्पलीफायर) अंदर, उदाहरण के लिए, change 1Watts PA to 2.5 वत्स या 5 वाट.
–160MHz~860MHz HD video COFDM receiver module with HDMI/AV/Ethernet/USB output

The COFDM receiver module is a compact digital diversity receiver with integrated H.264 decoding, suitable for use in fluid and high-mobility applications. The receiver module accepts signals from two antennas to significantly enhance the demodulated performance and increase the operating range. The receiver module can find and lock automatically to the incoming transmission quickly according to the pre-set frequency and bandwidth. This receiver module features a range of comprehensive signal outputs including HD at 720p and 1080P, down-converted HD CVBS monitor video, and two analog audios supported.
The receiver module also includes DVR record functionality with a Micro SD card or USB disk. इसके अतिरिक्त, the receiver module has a built-in RTSP server that enables video streaming over Ethernet for remote software or hardware decoders. And the receiver module also enables video streaming over USB for remote Android device decoders like smartphones or Android PAD. This allows multiple remote viewers to monitor the same video simultaneously. The receiver module also supports display characters string on the video display screen with the video together in OSD mode.
When paired with the Our COFDM transmitter module, the receiver module offers a comprehensive, rapidly-deployable video and audio solution that enables advanced situational awareness. It can play an essential role in delivering real-time live video from both ground and airborne mobile platforms.
- COFDM demodulation and H.264 video decoder;
- पूर्ण एचडी रिज़ॉल्यूशन, 1080पी@60एफपीएस;
- Great security by AES decryption;
- DVR record with Micro SD card or USB disk;
- Built-in RTSP server enables video streaming over Ethernet;
- Enables video streaming over a USB host for the remote device;
- Supports display characters string on the video display screen in OSD mode;
- Stable signal transfer in NLOS and high-speed moving;
- समायोज्य कार्य आवृत्ति, and bandwidth.
विनिर्देश:
आईओ
| एचडी वीडियो आउटपुट | HDMI type A connector |
| समग्र वीडियो आउटपुट | 6पिन PH2.0mm कनेक्टर |
| ऑडियो आउटपुट | Embedded HDMI and CVBS |
| आरएफ इनपुट | Two SMA female 50Ω |
| विद्युत आगम | 2PIN PH2.54mm connector |
| यूएसबी होस्ट | 4पिन PH2.0mm कनेक्टर |
| TTL UART data | 3पिन PH1.25mm कनेक्टर, 3.3V signal |
| टीटीएल यूएआरटी नियंत्रण | 4पिन PH1.25mm कनेक्टर, 3.3V signal |
| ईथरनेट | 6पिन PH2.0mm कनेक्टर |
| TF-Card | TF-Card slot |
| कुंजियाँ&एल ई डी | 2*5पिन PH2.0mm कनेक्टर |
demodulation
| Demodulation Formats | COFDM(डीवीबी-टी) |
| वाहक | 2के |
| Bandwidth | 1 मेगाहर्ट्ज से 8 मेगाहर्ट्ज तक कॉन्फ़िगर करने योग्य, चरण दर 1KHz |
| एफईसी | 1/2, 2/3, 3/4, 5/6, 7/8 |
| गार्ड अंतराल | 1/32, 1/16, 1/8, 1/4 |
| तारामंडल | क्यूपीएसके, 16QAM, 64QAM |
| बिटरेट | 0.5एमबीपीएस से 31.67 एमबीपीएस |
आरएफ
| फ़्रीक्वेंसी बैंड | 160मेगाहर्ट्ज~860 मेगाहर्ट्ज |
| ट्यूनिंग चरण का आकार | 1KHz |
| संवेदनशीलता | -97±1dBm(बीडब्ल्यू=8मेगाहर्ट्ज, क्यूपीएसके, सीआर=2/3, जीआई=1/16) for one channel and add 3dBm for two channel |
वीडियो और ऑडियो
| वीडियो आउटपुट | HDMI and CVBS, ईथरनेट(RTSP protocol by default, option UDP), USB |
| वीडियो प्रारूप | 1080P or 720P
720*480 60मैं(एनटीएससी), 720*576 50मैं(दोस्त) |
| वीडियो डिकोडिंग | MPEG-4/H.264 AVC |
| ऑडियो आउटपुट | Embedded HDMI and AV audio |
| ऑडियो डिकोडिंग | एएसी |
| डिक्रिप्शन | एईएस256 |
| भंडारण | USB disk or micro SD card |
निगरानी एवं नियंत्रण
Comprehensive receiver setup with Our Config Panel or Windows PC or other devices via control UART.
तापमान की रेंज
पूर्ण विशिष्टता: 0° से +70°C परिवेश
भंडारण: -40° से +80°C
भौतिक विशेषताएं
Board Dimensions: 80.4*50.8मिमी
बिजली की आवश्यकताएं
इनपुट रेंज: 9~24वीडीसी
Power consumption: <300mA@12V
IO Signals


कुंजियाँ + एल ई डी:
The receiver module has a 2*5PIN PH2.0mm connector which provides “keys + LEDs” signals. It is designed for customers who want to expand LEDs and keys to their cases.
PWR led signal: this two-pin can connect to an led for the power indicator, and constant light when the device is normally powered.
The link led signal: this two-pin can connect to an led for a wireless link indicator, which blinks when the video stream is received.
REC led signal: this two-pin can connect to an led for a record indicator, and constant light when video recording.
REC key signal: this two-pin can connect to a button for the switch of video recording, and a short press to change its status. The receiver will automatically check the storage device(micro SD card or USB disk) after powering on and start to record video when the storage device is inserted. Just press it to stop or record again.
ओएसडी कुंजी: this two-pin can connect to a button for turning on/off the status of the OSD displaying, स्विच करने के लिए इसे देर तक दबाएँ(1s से अधिक). The status will be kept after a reboot. जब ओएसडी स्थिति डेटा से किसी भी ओएसडी डेटा इनपुट के बिना चालू होती है, डिवाइस वीडियो स्क्रीन पर जानकारी प्रदर्शित करेगा:
आरएफ:338.0MHz BW:4.0MHz ; आरएफ, कार्य आवृत्ति; बीडब्ल्यू, बैंडविड्थ
क्यूपीएसके सीआर:2/3 सैनिक:1/16 ; तारामंडल, एफईसी, गार्ड अंतराल
वायु:3.90एमबीपीएस ; वायु, वायरलेस ट्रांसमिटिंग बिटरेट
VBR:3.05Mbps AES OFF ; VBR, वीडियो बिटरेट; एईएस बंद, एईएस एन्क्रिप्शन बंद कर दिया गया.
एसआईजी1:27 SIG2:22 ; एसआईजी1, the signal intensity of antenna 1; SIG2, the signal intensity of antenna 2
ber1:0.14% बेर2:100.00% ; ber1, bit error rate of antenna 1; बेर2, bit error rate of antenna 2
आरईसी ऑफ कोई भंडारण नहीं ; वीडियो रिकॉर्डिंग स्थिति

Paired with COFDM transmitter:
The default normal features of the two-antenna Wireless receiver module can be paired with all of Our H.264 transmitter modules. The HD video latency from its inputting of the transmitter to the HDMI screen displaying of the receiver is about 200~250ms.
Our two-antenna COFDM Wireless Receiver module can also be paired with our COFDM transmitter module for the lowest video latency application when manufactured with specified firmware. The specified firmware enables proprietary H.264 video compression/decompression only using p-frames for the lowest latency. The video latency from its inputting of the transmitter to the HDMI screen displaying of the receiver is about 50ms to 130ms.


How to test COFDM IP wireless video data transmitter module?
ethernet modem in one way
पूछे जाने वाले प्रश्न
Please note that this network transparent transmission device is one-way transmission, it can only realize UDP broadcast function, although there is an RJ45 network port, but because it is not two-way transmission, it cannot realize the ping command, so even if you want to connect an IP camera, you need special customization IP cameras, because ordinary IP cameras need two-way transmission equipment.
How to test this network transparent transmission device, कृपया नीचे दिए गए लिंक की जाँच करें
How to test COFDM IP wireless video data transmitter module
नहीं, just net transfer via IP ethernet RJ45 input.
- If you want to test the video transfer, maybe you need an encoder board वीकैन1746, transfer HDMI / CVBS video to IP stream, then connect the 1816 ट्रांसमीटर.
- सवाल: I already have Vcan1776, which has a Vcan1746 encoder board at the transmitter module, should I get one more encoder board?
- उत्तर: Although the encoder board of Vcan1776 can be reused. It needs to disassemble the Vcan1776 RF module, then connect the network port adapter cable, and change the different firmware. It is not recommended to do this. It is recommended that you purchase another separate encoder board.
- The voltage range of TX RX is 7~24V.
- At 12V power supply, use an adapter with a maximum of 1A or more.
- Prepare a formattedFAT32format Micro SD card

fat32-format - Unzip the upgrade file from our verify and send to you, Here is "1816_update_image_xx_yy.zip" फ़ाइल, and copy it to the root directory of the Micro SD card, pay attention to keep the directory structure unchanged (माइक्रो एसडी कार्ड की रूट डायरेक्टरी में एक फ़्लैश फ़ोल्डर है, and there is an app folder in it).

one-way ethernet transparent transmission moudle firmware upgrade - Insert the Micro SD card into the Vcan1816 module, बिजली चालू करें और बोर्ड पर लाल बत्ती चमकने का इंतज़ार करें, यह दर्शाता है कि अपग्रेड सफल है.

COFDM IP wireless video data transmitter module One-way Ethernet transparent transmission network port upgrade firmware - टिप्पणी:
Under normal circumstances, the update will be completed within 30s after power-on (लाल बत्ती चमकती है). यदि बिजली चालू करने के बाद लाल बत्ती लंबे समय तक नहीं चमकती है, please check the connection of Micro SD and try power-on again.
हाँ, this model support the function you need. कृपया नीचे दी गई तस्वीर की जाँच करें, we have two solutions for you. The same TX module, there are optional RX1 or RX2 for you.

- At the above picture, TX module is only RJ45 ethernet data input, no video input, so there is no any encoder function.
- RX1 is added 2x RF demodulator board on the TX module. So the cost is higher than TX module. (one more top board)
- RX2 has same function, but which no TX transmitting function, it is only bottom decoder board + 2xRF demodulator board. It has RJ45 ethernet data port. So it can total meet your demand. And as the board has mass produce and cost can share and down.









Konstantin –
The COFDM IP wireless video transmitter vcan1816 delivers exceptional performance! Its one-way Ethernet transparency ensures seamless HD video/data transmission with ultra-low latency. Robust signal stability in challenging environments impressed us, while the plug-and-play network port simplified integration. Reliable beyond expectations for industrial/outdoor applications – a game-changer for real-time remote monitoring systems!
जॉन –
This COFDM module provides reliable IP video and data transmission over distances of 10 को 100 किलोमीटर, with latency under 50 मिलीसेकंड. Customizable core modules are ideal for oil rigs, disaster relief drones, and battlefield communications.