Custom RF Downconverter Frequency Conversion OEM ODM Solutions

Precision RF frequency conversion solutions tailored for UAV, microwave, और वायरलेस संचार प्रणाली.

We design and manufacture custom RF downconverters for complex frequency translation requirements in microwave, UAV video transmission, बेतार संचार, and RF testing systems.

Whether you need a standard configuration or a fully customized solution, we can engineer the device based on your exact इनपुट आवृत्ति, आउटपुट आवृत्ति, बैंडविड्थ, and system requirements.

---

What is a RF Downconverter?

A downconverter is an RF device that converts a higher frequency signal to a lower intermediate frequency (अगर), making it easier for signal processing, संचरण, or demodulation.

Our solutions support:

• Microwave RF systems
• यूएवी / drone video links
• COFDM / OFDM communication systems
• Wireless telemetry systems
• RF testing & measurement platforms

---

Full Custom RF Downconverter Specification Table

Below is a complete engineering selection guide.
You can define any parameter combination for your system.

1. Frequency Conversion Parameters

पैरामीटर	Custom Range	Engineering Notes
Input Frequency (RF IN)	50 मेगाहर्ट्ज - 12 गीगा (बढ़ाई)	Covers VHF / यूएचएफ / microwave bands
आउटपुट आवृत्ति (IF OUT)	30 मेगाहर्ट्ज - 3 गीगा	Must match receiver system
रूपांतरण प्रकार	नीचे-रूपांतरण / Upconversion / दोहरी	Flexible RF architecture
स्थानीय थरथरानवाला (एलओ)	तय / Programmable / बाहरी	Determines flexibility
Frequency Step Size	Continuous / तय / Custom grid	For tunable systems
Frequency Accuracy	±1 ppm / ±0.5 ppm / OCXO / GPSDO	Critical for long-range stability

---

2. बैंडविड्थ & Signal Performance

पैरामीटर	Custom Range	Engineering Notes
आरएफ बैंडविड्थ	1 मेगाहर्ट्ज - 500 मेगाहर्ट्ज	Narrowband or wideband design
IF Bandwidth	1 मेगाहर्ट्ज - 200 मेगाहर्ट्ज	Depends on modulation type
Gain Control	-10 डीबी को +40 डीबी	Adjustable amplification
शोर चित्र	1 dB – 6 डीबी	Lower is better for sensitivity
Group Delay	कम / Ultra-Low	Critical for COFDM video systems
समतलता	±0.5 dB / ±1 dB / ±2 dB	Signal quality consistency

---

3. आरएफ & सिग्नल गुणवत्ता

पैरामीटर	Custom Range	Engineering Notes
आईपी3 (रैखिकता)	+10 dBm to +35 डी बी एम	Anti-interference capability
Spurious Suppression	-60 dBc to -100 डीबीसी	Clean spectrum output
छवि अस्वीकृति	40 dB – 80 डीबी	Prevent mirror frequency interference
Phase Noise	-80 को -120 dBc/Hz @10kHz	Critical for video & digital links

---

4. एलओ / Reference System

पैरामीटर	विकल्प	Engineering Notes
LO Source	आंतरिक / बाहरी / पीएलएल	System architecture choice
Reference Clock	10 मेगाहर्ट्ज / 100 मेगाहर्ट्ज / कोई नहीं	Synchronization standard
Reference Stability	TCXO / OCXO / Rubidium / GPSDO	Determines long-term accuracy
Phase Lock	हाँ / नहीं	Stability improvement option

---

5. इंटरफेस & शक्ति

पैरामीटर	विकल्प	Engineering Notes
RF Connector	हाई स्कूल / N-Type / एमएमसीएक्स / बीएनसी	System integration compatibility
IF Output	हाई स्कूल / Baseband / ईथरनेट (वैकल्पिक)	Output format
नियंत्रण इंटरफ़ेस	कोई नहीं / यूएआरटी / USB / I2C	Optional smart control
बिजली की आपूर्ति	5वी / 12वी / 24वी / 28वी / Wide range	System integration flexibility
बिजली की खपत	<2डब्ल्यू / 2–5W / 5–10W	Depends on gain & LO design

---

6. यांत्रिक & Environmental Design

पैरामीटर	विकल्प	Engineering Notes
आवास	अल्युमीनियम / Shielded / Ruggedized	EMI protection level
आकार	Mini / मानक / OEM PCB	Installation flexibility
तापमान की रेंज	-20डिग्री सेल्सियस से +70 डिग्री सेल्सियस / -40डिग्री सेल्सियस से +85 डिग्री सेल्सियस	औद्योगिक / military grade
Vibration Resistance	मानक / उच्च / UAV grade	Drone applications
EMC Shielding	मानक / Enhanced / भरा हुआ	Anti-interference protection

---

Application Optimization

We optimize designs based on your application:

• यूएवी / Drone video transmission → low latency + low phase noise
• Microwave communication → high frequency stability
• COFDM systems → low group delay + flat response
• RF testing systems → high precision + calibration stability
• Surveillance systems → high sensitivity + विरोधी हस्तक्षेप

---

Real Custom Frequency Conversion Cases

Case 1

2200–2300 MHz → 600–700 MHz
Used in microwave video transmission systems requiring IF compatibility.

---

Case 2

902–928 MHz → 702–728 MHz
Industrial wireless telemetry and ISM band adaptation.

---

Case 3

2035–2105 MHz → 635–705 MHz
UAV data links and COFDM video transmission optimization.

---

Important Engineering Considerations (Often Missed)

Many customers overlook critical RF design parameters:

• LO phase noise → affects video stability
• Image rejection → causes hidden interference
• IF bandwidth mismatch → signal distortion or loss
• Gain too high → system overload
• Connector mismatch → integration failure
• Temperature range → outdoor UAV failure risk
• Power instability → random reset or drift

---

Request Your Custom RF Solution

To design your system, please provide:

• Input frequency range
• Output frequency range
• बैंडविड्थ की आवश्यकता
• Application scenario
• Operating environment (इनडोर / आउटडोर / यूएवी / औद्योगिक)
• Estimated quantity

👉 Our RF engineering team will evaluate and propose an optimized design solution.