Il existe une demande d'émetteurs et de récepteurs vidéo sans fil pour les caméramans et réalisateurs en direct..
The below briefing the requirements of the equipment.
- Fréquence de travail 595 – 610MHz
- SDI input in the transmitter
- SDI output in the receiver
- Video format to support, FHD 50i, 59.84i and 60i, interlaced video and Embedded audio, dual channel in SDI
- Transmitter antenna not longer than 300mm
- Receiver antenna, 1.8m, 4pièces
- Puissance d'émission, 20Amplificateur de puissance W
- Format de compression, H.265 with low latency
- Please include two LCD panels.
- 1km~2km transmission range
- 1080i resolution
- It is better RF input connector type is BNC, 50ohm, 40-60 meter feeder cable
- Support right-channel and left-channel stereo audio
- S'il y a 10 photographers, the director may be switching or using one of the videos. By transmitting the video in the direction, the photographer can see which video the director is using.
- Or add an indicator light on the transmitter to indicate that the director is currently using that photographer’s video stream.
Ask A Question
Merci pour votre réponse. ✨