Carte décodeur vidéo SHD4

— Décodeur vidéo H.264, sortie haute définition jusqu'à 1920*1080@60
— Entrée Ethernet, Sortie HDMI+AV
— Audio codec with audio output
— Video record with a Micro SD card or USB disk
— Web UI or uart for management
— The normal video latency is about 200ms when paired with encoder module
— Support proprietary H.264 video decompression only used p-frames for lowest latency as 50ms to 130ms

SHD4 video decoder board implements H.264 video decoding and audio codec, the video stream input via Ethernet is decoded and sent to display via HDMI and AV interface. The SHD4 decoder board features a range of comprehensive signal outputs including an HD video at 1080P/720P, down-converted HD CVBS monitor video, and two analog audios supported. SHD4 board includes DVR record functionality with a Micro SD card or USB disk using record switch controls. En plus, the SHD4 board supports a built-in RTSP server that enables video streaming over Ethernet for remote software or hardware decoders(option). This board is in compact size and suitable for embedded applications and real-time live video monitoring via wireless link or Ethernet.

spécification:

IO

HD video output	HDMI type A connector
Composite video output	6PIN PH2.0mm connector
Sortie audio	Embedded HDMI and 6PIN PH2.0mm connector
Alimentation	2PIN PH2.54mm connector
USB Host	4PIN PH2.0mm connector
Keys+LEDs	Extension port for assembling keys and LEDs on necessary
3.3V TTL data uart	3Connecteur PIN PH1,25 mm
3.3V TTL control uart	4Connecteur PIN PH1,25 mm
TF-Card	TF-Card slot
Ethernet	6PIN PH2.0mm connector

Vidéo et audio

Sortie vidéo	HDMI and CVBS
Formats vidéo	1080P or 720P 720*480 60je(NTSC), 720*576 50je(COPAIN)
Décodage vidéo	H.264
Sortie audio	Embedded HDMI and Analog audio
Audio Decoding	CAA
Décryptage	AES256
Espace de rangement	USB disk or micro SD card
Ethernet stream protocol	Support UDP TS stream decoding, RTSP client decoding, RTSP server forward

Surveillance et contrôle
Setup via Web UI or control uart.

Plage de température
Spécification complète: 0° à +70°C Ambiante(Facultatif: -40° to +85°C)
Espace de rangement: –40° to +85°C

Exigences de puissance
Plage d'entrée: 9~30VDC
Consommation d'énergie: <250mA@12V

Caractéristiques physiques
Dimensions: 80.4 * 50.8mm(sans compter les connecteurs hors de la carte)
PCB thickness: 1.2mm, the maximum height of up components less than 7mm, the maximum height of bottom less than 2.5mm.
Poids:27.3g